ITP Racecars
+ Reply to Thread
Results 1 to 13 of 13

Thread: Autowatch 446 RLi - Wiring Diagram

  1. #1
    Join Date
    Nov 2008
    Location
    SOR
    Posts
    3,692

    Autowatch 446 RLi - Wiring Diagram

    Anyone have the wiring diagram for an Autowatch 446 RLi?

    My 190E has one installed (though I'm surprised it even works given the state of the wiring...) and I want to remove it but I want to keep track of the wires that it's spliced in to for future reference shall I need to use these for the new alarm.

    Thanks.
    [190E] - Mercedes-Benz 190E, no mods
    [HLN] - Royal Enfield, 500cc of single-cylinder fury

  2. #2
    cplagz Guest
    Must be a 1980's euro car thing.... I like tinned spaghetti under my dashboard! But Rob @ Volatile might be able to help you out.

  3. #3
    Join Date
    Aug 2009
    Posts
    15,985,312
    I PM'd one to someone on here a couple of years back, will have to go through my PMs for you.

    Honestly don't worry about it, most installers can find the main wires from scratch in 15 minutes and could find the rest (central locking, dome light etc) relatively quickly.

    15 minutes was around my record for a full immob in a hilux, but I'm obviously a bit out of practice these days
    Quote Originally Posted by Buckets View Post
    Lewis is King of the flogs, a talented one I admit but he is #1 Champion of the Cumsocks and there's not really anyone who's even remotely close aside.

  4. #4
    Join Date
    Aug 2009
    Posts
    15,985,312
    Quote Originally Posted by cplagz View Post
    Must be a 1980's euro car thing.... I like tinned spaghetti under my dashboard! But Rob @ Volatile might be able to help you out.
    mates you should see under a GTR dash, i reckon most r32 and r33s have at least 3 immobilisors, alarms, and turbo timers wired up in parallel
    Quote Originally Posted by Buckets View Post
    Lewis is King of the flogs, a talented one I admit but he is #1 Champion of the Cumsocks and there's not really anyone who's even remotely close aside.

  5. #5
    Join Date
    Nov 2008
    Location
    SOR
    Posts
    3,692
    Quote Originally Posted by Mullmans View Post
    I PM'd one to someone on here a couple of years back, will have to go through my PMs for you.

    Honestly don't worry about it, most installers can find the main wires from scratch in 15 minutes and could find the rest (central locking, dome light etc) relatively quickly.

    15 minutes was around my record for a full immob in a hilux, but I'm obviously a bit out of practice these days
    I'm the installer, so if you could hunt through your PMs that would be great.

    You're right, the main wires are quite obvious from the existing wiring, but it's more-so "the rest" that I'm concerned about as the car lacks a battery and will do for some time, so I'd be working purely off continuity.
    [190E] - Mercedes-Benz 190E, no mods
    [HLN] - Royal Enfield, 500cc of single-cylinder fury

  6. #6
    Join Date
    Aug 2009
    Posts
    15,985,312
    I wouldn't do that... Way too much of a headfuck to troubleshoot and you are relying on the first person getting everything right
    Quote Originally Posted by Buckets View Post
    Lewis is King of the flogs, a talented one I admit but he is #1 Champion of the Cumsocks and there's not really anyone who's even remotely close aside.

  7. #7
    Join Date
    Dec 2004
    Location
    Malaga, WA
    Posts
    877
    Shoot me your email address and I can send it direct to you.

    Rob.

  8. #8
    Join Date
    Nov 2008
    Location
    SOR
    Posts
    3,692
    Quote Originally Posted by Mullmans View Post
    I wouldn't do that... Way too much of a headfuck to troubleshoot and you are relying on the first person getting everything right
    That's why I need the wiring diagram, to figure out why things have been spliced in to and cross-reference, if I can, with the Mercedes wiring diagrams, however convoluted they may be.

    Thanks Rob, absolute champion.
    [190E] - Mercedes-Benz 190E, no mods
    [HLN] - Royal Enfield, 500cc of single-cylinder fury

  9. #9
    Join Date
    Dec 2004
    Location
    Malaga, WA
    Posts
    877
    Sent.. should be in your email by now... let me know if you need any further help with it.

    Rob.

  10. #10
    Join Date
    Jun 2017
    Location
    South Africa
    Posts
    6
    Quote Originally Posted by Volatile Rob View Post
    Sent.. should be in your email by now... let me know if you need any further help with it.

    Rob.
    Hi could you please foward me the installation manual for the 446 rli i am having problems with the dome light

    Thank you

  11. #11
    Join Date
    Dec 2004
    Location
    Malaga, WA
    Posts
    877
    Quote Originally Posted by Prian View Post
    Hi could you please foward me the installation manual for the 446 rli i am having problems with the dome light

    Thank you
    Sent to your email.

  12. Likes Prian likes this post
  13. #12
    Join Date
    Jun 2017
    Location
    South Africa
    Posts
    6
    Thank you rob

  14. #13
    Join Date
    Jun 2017
    Location
    South Africa
    Posts
    6

    446rli domelight

    Having issues with the dome light i have the negative from my light connected to pin 11 on the autowatch 446rli harness also tried to program 8.3 but no beeps from siren i am in program mode because i can turn off antihijack. But no response from siren for the dome light

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts