Guys,

Looking for recommendations on good fabricators / workshops to make some modifications to my existing manifold.

I have a custom built single turbo manifold on a bmw n54 on the car for almost 4yrs.
Found the aluminum coolant pipe was rubbing on the steering column and its worn through.
Pulling the turbo off I've now also noticed the turbine housing had been beating on the shock tower maybe during starts/shut down or under load but i hadn't noticed before because the damage was hidden by the turbo blanket.

So the manifold outlet and wastegate position needs to be moved about 1/2" forward, maybe a slight adjustment to the angle of the wastegate to allow this.
Plus the water block coolant pipe needs modification.

Another problem is i cant pull th8s sh8t out with the capability than i have in my garage.

Can anyone recommend a good workshop / skill fabricator to take a look?

Cheers, Rod.