ITP Racecars
+ Reply to Thread
Results 1 to 4 of 4

Thread: Turbo Manifold Fabricators - Recommendations in Perth

Hybrid View

  1. #1
    Join Date
    Oct 2019
    Posts
    32

    Turbo Manifold Fabricators - Recommendations in Perth

    Guys,

    Looking for recommendations on good fabricators / workshops to make some modifications to my existing manifold.

    I have a custom built single turbo manifold on a bmw n54 on the car for almost 4yrs.
    Found the aluminum coolant pipe was rubbing on the steering column and its worn through.
    Pulling the turbo off I've now also noticed the turbine housing had been beating on the shock tower maybe during starts/shut down or under load but i hadn't noticed before because the damage was hidden by the turbo blanket.

    So the manifold outlet and wastegate position needs to be moved about 1/2" forward, maybe a slight adjustment to the angle of the wastegate to allow this.
    Plus the water block coolant pipe needs modification.

    Another problem is i cant pull th8s sh8t out with the capability than i have in my garage.

    Can anyone recommend a good workshop / skill fabricator to take a look?

    Cheers, Rod.

  2. #2
    Join Date
    Apr 2005
    Location
    Perth
    Posts
    1,931
    I would try contact Brenton

    https://www.instagram.com/superiordesignfab/

  3. #3
    Join Date
    Oct 2019
    Posts
    32
    Thanks!

    I'm hoping it's an engine mount failure that way I only need to repair the coolant line and not d8ck with the manifold.
    Will touch base with Brenton when I get the part out and assess the damage.

    Cheers, Rod.

  4. #4
    Join Date
    Jan 2013
    Posts
    39
    Nelg's Ali Mods.

  5. Likes rac likes this post
+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts