WA Performance
+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3
Results 51 to 70 of 70

Thread: 1991 KRPS13 SR23 (2.35lt)

  1. #51
    Join Date
    Sep 2008
    Posts
    157
    I would fuck the 044's off anyway, Mine didnt last long on E85 at all. And then go "in surge tank" E85 Walbros.

  2. Likes SimonR32 likes this post
  3. #52
    Join Date
    Oct 2009
    Location
    perth
    Posts
    40
    Quote Originally Posted by LostInTheWoods View Post
    I would fuck the 044's off anyway, Mine didnt last long on E85 at all. And then go "in surge tank" E85 Walbros.
    +1
    I run a surge tank under car with submerged Walbro 465 E85 pump. Is basically quiet like factory.

  4. Likes SimonR32 likes this post
  5. #53
    Join Date
    Jan 2009
    Posts
    177
    Might be easy to go PWM control or stage the pumps to reduce noise depending on how its currently wired

  6. Likes masTers likes this post
  7. #54
    Join Date
    Sep 2008
    Posts
    380


    Also looking for some seating suggestions. Currently the bride brix II with the current unknown bride rail make my legs sit right on the momo steering wheel.

    I'm going to pull out the seat today to see what rail it is, has anyone else had a similar problem? Im happy to change rail/find another reclinable seat.

  8. #55
    Join Date
    Sep 2008
    Posts
    380


    Got it retuned with higher boost on 98 and went to the drags for the first time.

    This was my best on my second run. 12.25 Although the rears are 10" the china tyres weren't great on 25psi.


  9. Likes sicka, shifted, 180SXTCY likes this post
  10. #56
    Join Date
    Oct 2009
    Location
    perth
    Posts
    40
    Nice. Keen to see the 25psi dyno graph

  11. #57
    Join Date
    Jan 2009
    Posts
    177
    good effort!

    i went a few weeks back and had issues getting off the line, couldn't get any better than a 2.0 60'. Ran 12.2s all night with a best of 12.18 @122mph

  12. #58
    Join Date
    Sep 2004
    Posts
    1,452
    Great effort, Better tyres should see 11s!
    Great car. We need more photos and vids mate.


    Sent from my iPhone using Tapatalk
    Quote Originally Posted by Brockas aka. El Presidente View Post
    Everyone is entitled to an opinion, it just so happens yours is wrong.

  13. #59
    Join Date
    Sep 2008
    Posts
    380
    Quote Originally Posted by 1aaron View Post
    Nice. Keen to see the 25psi dyno graph
    You asked.

    This is e85.



    Itís quite the handful on road tyres. Canít fit R comps on my 10Ē tears.

    Any wheel suggestions welcome.

  14. Likes mr_rotary, Lump, sicka, 180SXTCY likes this post
  15. #60
    Join Date
    May 2004
    Location
    Quality NOR
    Posts
    5,814
    Get a S14/15 subframe if you want traction, also it appears that R888R are the hotness for high powered RWD cars at the moment

  16. Likes siamak likes this post
  17. #61
    Join Date
    Sep 2008
    Posts
    380
    Quote Originally Posted by SimonR32 View Post
    Get a S14/15 subframe if you want traction, also it appears that R888R are the hotness for high powered RWD cars at the moment
    32gtr subframe no good?

  18. #62
    Join Date
    May 2004
    Location
    Quality NOR
    Posts
    5,814
    Quote Originally Posted by siamak View Post
    32gtr subframe no good?
    Nope, has the higher front LCA mounting point

  19. #63
    Join Date
    Jun 2006
    Posts
    253
    and/ or change the front mounting point for the LCA to flatten it out (dont know if this would be legal on road car ??)

  20. Likes SimonR32 likes this post
  21. #64
    Join Date
    May 2004
    Location
    Quality NOR
    Posts
    5,814
    Quote Originally Posted by S13 View Post
    and/ or change the front mounting point for the LCA to flatten it out (dont know if this would be legal on road car ??)
    Yeah I really need to do this in the GTR but lazy

  22. #65
    Join Date
    Sep 2008
    Posts
    380
    Andrew is welding a new bracket to modify the rear subframe so should help.

  23. Likes SimonR32 likes this post
  24. #66
    Join Date
    Apr 2005
    Location
    SoR
    Posts
    3,766
    Quote Originally Posted by siamak View Post
    Andrew is welding a new bracket to modify the rear subframe so should help.
    Tell Andrew to stick 2 bar down its throat whilst you're at it.
    My Garage:
    -05' BMW E46 M3
    -01' S15 SR20DET - SOLD
    -01' S15 SR22DET - SOLD
    -95' S13 180SX SR20DET - SOLD
    -91' S13 180SX SR20DET - SOLD

  25. #67
    Join Date
    Sep 2008
    Posts
    380
    Some updates:

    Yaris coils from Goleby's shat themselves so upgraded to the full R35GTR PRP kit. Going for a re-tune as now producing more reliable spark.

    New Enkei RPF-1 with Federal 595RSRR 265/35R18 on the rear's.

    Respray with a full type x rear on the car.

    Photos coming shortly...

  26. Likes Rb_sil likes this post
  27. #68
    Join Date
    Jul 2006
    Location
    south perth
    Posts
    4,329
    Jeezus on a Tricycle
    ____________________________
    2002 Audi S3 465WHP @ 30 PSI

  28. #69
    Join Date
    Oct 2009
    Location
    perth
    Posts
    40
    Quote Originally Posted by siamak View Post
    Some updates:

    Yaris coils from Goleby's shat themselves so upgraded to the full R35GTR PRP kit. Going for a re-tune as now producing more reliable spark.

    New Enkei RPF-1 with Federal 595RSRR 265/35R18 on the rear's.

    Respray with a full type x rear on the car.

    Photos coming shortly...
    The old Golebys 'Genuine' Yaris cop's. Myself and mates have been caught out by that one too..

  29. #70
    Join Date
    Sep 2008
    Posts
    380





    Made something over 600hp, roller dyno and semi slicks = shredded tyres despite 2 people on the boot.

    Looking forward to another attempt at the drags now.

+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts