6 GTR 440cc injectors for sale (perth only)

[RB26VL]

hey guys its a set of stock 440cc injectors from my rb26 engine and i want around $320 ono for the set. perfect cond, upgrading to 700cc ones now so i dont need em.
:D
my mobile is 0402 622 317 if u wanna contact me or reply on this thread.

thanx

Brad

[SmItLeR]

hey man - i'm brad to :) nice to meet ya - so u really got a RB26DETT in a VL?

[RB26VL]

yep its got high flow turbos (360 degree thrust bearings, etc) and bigger wheels, gtr cooler, twin plate clutch, 300zx tt 5 speed, 4.11 lsd diff, custom bov, twin pods, hpc coated 2" inatek pipes, hpc coated 3" cooler piping, polished and detailed engine, autronics smc ecu, motorsport 044 fuel pump, surge tank, battery in the boot, soon to have 700cc injectors and runnin 22psi or so :D

it made 280hp at wheels on 7psi and stock injectors (all other mods the same)

cant wait for injectors and for it to be tuned by lumpy :D

should go even better than it does already :)

its also got 2 pack purple respray, lowered, dark tint, its a calais with full electrics, fully painted undercarrage, etc.

i probably forgot heaps of stuff but thats usual hahah...

cya

Brad

[suburban]

custom boot enclosure ?

post some pics in the showcase bit

[SmItLeR]

fk yeh thats sounds like a beast - i'm keen to see pics - who did the conversion ?

[RB26VL]

me and my dad did everything except tune it on dyno, made the exhuast, dump pipes, intake pipes, cooler pipes, new power steering bracket, modified the sump, shortened the gear shifter (its 300zx tt 5speed with rb25 bellhousing so its got external shifter on rear of box meaning it was about 20cm too far back in the cabin, so we cut it down and shortened it so its still about 5-10cm too far back so we made a custom centre console to suit with guage holders. We wired up the autronics ecu and cranked it till we got oil pressure and then we took it to shop to be tuned. we did the polishing at home, and everything else. installed the surge tank, fuel pump, made the boot stereo enclosure (which is now in my other car, daily driver) and we painted the undercarriage, etc.

lots of stuff i missed but ohh well....

cya

Brad

[RB26VL]

http://www.geocities.com/psi_vl/photos.htm

heres some pics, but they are all about 2 years old and no polishing or nothing is done in the pics, ill get some new pics soon as possible (all pics are before i finished the project)

cya

Brad

[DCIEVE]

hey im very interested in the injectors
you mention you only made 280rwhp with them, whereas others have made over 350rwhp with stockers. was 280rwhp with them maxing out? if so they might be in need of a clean

[MrMayhem]

he only made that power cos he didnt bring a bleed valve

[DCIEVE]

hey mayhem what mods to the injector rail do i need to do to make these squirters fit??

[1JZNOSHIT]

hey dude, are the injectors still for sale??

[ricknismo]

got some too...same price

[suburban]

stop mowing others lawns !

:)