View Full Version : Lellow32 dyno sheet
My r32 got tuned last night at Speedworks! Made 312rwhp!!!
now this was at the hubs, so on a roller dyno probly round the 300hp mark, but still really impressive. Now all i need to do is get it over the pits. thinking of going to Midland, anybody got any tips let me know.
312rwhp at 19 pound, 349nm of torque
pretty good for rb20, would like to know wat "Cerbera" thinks of that ha.
http://photobucket.com/albums/f236/lellow32/
its with all my other photos but yeh.
180SXTCY
02-03-2006, 03:51 PM
well done mate! car looks good 2..
ReaperSS
02-03-2006, 03:58 PM
Good job!
What mods do ya have if ya dont mind me askin?
Apart from the obvious hks 2535 ;)
Twe12ve
02-03-2006, 04:03 PM
i like your car man..looks nice..must be a blast to drive..and ull be heading for high 12s with that HP as well..
[RX2]
02-03-2006, 04:04 PM
not bad at all !!
just hav a look in my showcase thread, "Project R32" its all there....
gtrken
02-03-2006, 04:11 PM
Yipes, 120 hp at 4K and 312hp at 5and a bitK.
Bet you that comes on with a rush !!
Think you will find a dyno dynamics dyno will be a little harsher than 300rwhp but still looking good.
Did Shaunie tune that?
Or AJ ??
aj, and yes comes on really strong. at about 4,500 it comes on strong and you think thats it but then it comes even stronger about 6000rpm. goes hard ha ha
Brockas
02-03-2006, 05:29 PM
lellow32 > cerbera
Saw your car at SW today...looks nice!
deeman111
02-03-2006, 06:46 PM
he means lellow32 > (is greater than) cerbera
James
Milhouse
02-03-2006, 06:50 PM
impressive figures there :)
ha ha ha ok cheers. im still waiting to hear from that boy..... :P
randominsanity73
02-03-2006, 08:55 PM
Hehe yeah I saw your car today at SW as well....Tidy car, all it needs is a wash!
hoony
02-03-2006, 09:23 PM
LOL congratulations...
you should've seen this guy in class today,
SO excited he wouldn't wipe the grin off his face.
awesome figures man, can't wait to see it in action!
Andy
1JZNOSHIT
03-03-2006, 07:14 AM
LOL, you dont need to worry about Cerbera, he has several dented panels, kurbed drift wheels, cracked interior and a pinging motor....
Nice figures mate and a hot car!
dyno dynamics would probably show around the 280+ rwhp mark?
SimonR32
03-03-2006, 03:42 PM
divided it by at least 1.18 to get a more realistic figure
so count on about 270rwhp on a DD dyno
the hubber does not read rwhp, its reads ps from the hubs which is nothing like rwhp
why is it soo laggy?!? brads setup is virtually the same and comes on a lot earlier and makes more power?!?
Remix
03-03-2006, 04:03 PM
Well done dude! Awesome result for the 20. The power curve looks like bulk fun :)
Cerbera needs runs against this.. :banana:
[BANNED]
03-03-2006, 05:45 PM
End of the day guys dyno's are a tuning tool.... don't get too carried away with the numbers.
So when are you boys running? ;)
ill race anyone as soon as i get it on the road. ha ha. hopefully everything goes well with the pits.
and for cerbera, when uve got something positive to say then write a post. im sick of seeing constant negative posts from you.
magic1
03-03-2006, 07:03 PM
cerbera = sour
Fixed your car yet simon i want to race you and your power house.
(simon, do you want to borrow some forged pistons i know how much u loved my tyres)
gtr_eta
04-03-2006, 06:05 PM
simon if a roller dyno is so different but these two cars have similar mods but brads has more hp on a roller your tellin me brads will do 400 at the wok yurr pingin off your head as well as your 89 ****ter that makes less than 300 on the dream dyno x o x o love ya lots
hubber love...!
in all seriousness, fuck the hubber vs dd shit, has been covered & proven many a times what reads higher...get em out and run some numbers & or each other and stop comparing dick sizes over dyno figures...
p.s my moneys on cerberas shitter...
SYK STI
06-03-2006, 10:13 AM
race the old sh_tters
SimonR32
06-03-2006, 04:54 PM
i didnt say anything negative about the car, i just said both dynos are a lot different and asked you a few questions
as everyone is saying, dynos are tuning tools... go down to the drags and i bet you will run 107-108mph with that tune and boost
1JZNOSHIT
06-03-2006, 04:55 PM
ping is power
marbles for life
long die the RB20 SHTR!
SimonR32
06-03-2006, 04:56 PM
sean ur on drugs :)
270 rwhp > 297.8rwhp with audible ping
270 rwhp > 307rwhp @ 50psi
270 rwhp > unsolvable RB20DET misfire
HKS 2535 > AX53B70
Brockas
06-03-2006, 05:21 PM
Yellow > Orange peel mica
Black boot > crumpled boot
HKS coilovers > leaking coilovers
17inch rims with slight dish > natalloto copy rims
Building a car > buying a car
Twe12ve
06-03-2006, 05:26 PM
LOL @ "Natalotto copy rims"
u guys are harsh cun tz
tuyen
06-03-2006, 05:26 PM
game over man
SimonR32
06-03-2006, 06:32 PM
clowns
SimonR32
06-03-2006, 06:35 PM
and for cerbera, when uve got something positive to say then write a post. im sick of seeing constant negative posts from you.
my negative posts are only the result of people talking up things that they have no idea about, if you dont like it... dont ask for my opinion
1JZNOSHIT
07-03-2006, 07:19 AM
marbles knows all
he has the fastest r32
that is all.....
SYK STI
07-03-2006, 05:06 PM
my negative posts are only the result of people talking up things that they have no idea about, if you dont like it... dont ask for my opinion
blah blah blah
when's the next antilag cruise....?
Brockas
07-03-2006, 11:19 PM
Check the events forum dude.
Sat 25th.
cerbera- the car is lagy cos the o2 sensor shat itself. so the cars a bit lazy. ill hav to get a re tune when aj's back. bout a month. i wont take it to the drags till then.... kinda gay
O2 sensor would cause excessive fuel use on cruise(light throttle).
I fail to see how it would make it more laggy...
yeh i have found that happens too. i just thought if the cars lazy then everyhing would take slightly longer....
hoony
08-03-2006, 02:32 PM
took a spin in this today... man it's *****n horn it is... sounds great and even with the 02 sensor problem not all touched up it goes hard...
really nice ride *thumbs up*
Andy
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.