Double Run Rubber Lined P Clips

[-Luke-]

Anyone got any or know where they can be sourced locally?

I need to secure some trans cooler lines that are aprox 19mm OD and would prefer to use Double Run P Clips over the usual cable ties but i'm not having much luck finding a local source?

Pics for reference-
http://i.imgur.com/Kp21c3F.png

http://i.imgur.com/FcNG1zD.jpg

[baz]

http://www.powercontrol.com.au/carroll-products-perth/p-clips/
Or you could try an electrical wholesaler near you
Ramax , CES etc.

[Phildo]

Pics for reference-
http://i.imgur.com/Kp21c3F.png



Pages 16 & 17 in the Tridon clamp catalogue - http://www.phil.net.au/Tridon_Clamp_Catalogue.pdf

[-Luke-]

Thank mate, they all only seem to list singles? I can get them out of the UK for around 88p to 1.25gbp Each but obviously freight/time to acquire from the UK is a pain.


http://www.thesitebox.com/screws-fixings/britclips-girder-clips/cable-and-conduit-fixings/double-run-insulated-steel-p-clip.aspx

[-Luke-]

Pages 16 & 17 in the Tridon clamp catalogue - http://www.phil.net.au/Tridon_Clamp_Catalogue.pdf

They are single not doubles.

[S85FI]

Chris mills. Got mine there when I did the blower.
Repco super cheap also do them in grab kits as I later found out.

[-Luke-]

All only do single hose clamps not the double/side by side clamps.

[Chaotic]

just run 2 single clamps bolt in the middle?

[-Luke-]

Not really viable with the mounting locations I have. I need to secure them to the lip of the front cross member to keep the away from the harmonic balancer and back from the engine cooling fans. I'd need to make up some standoffs to do that with back to back singles which is more effort than it's worth if I can just source the doubles.


Plus the doubles are more compact as you don't gain the extra length of the second mounting tang.

[S85FI]

Not really viable with the mounting locations I have. I need to secure them to the lip of the front cross member to keep the away from the harmonic balancer and back from the engine cooling fans. I'd need to make up some standoffs to do that with back to back singles which is more effort than it's worth if I can just source the doubles.


Plus the doubles are more compact as you don't gain the extra length of the second mounting tang.

Think outside the square. You buy the clip about two sizes to big and just squash it into shape to suit your need. They bend into place easy.

I did that and you can't tell.

[S133LTR]

Odins and couplers malaga

[-Luke-]

Haven't tried Odins, but couplers only carry single clamps.

No Dice at Odin either unfortunately.

[JETURBO]

http://i.imgur.com/xpzUQRi.png

[-Luke-]

^Pelican

[S85FI]

^Pelican

I thought it was a plastic cable tie?

[-Luke-]

"Jeturbo" is a mate from another forum trying to wind me up. He likes to insult people by calling them pelicans hence the rebuttal.

[JETURBO]

#stormboy