disc0-dan
18-11-2015, 09:13 PM
Unfortunately the time has come to part ways with another car as i really need to finish the house, well mainly the pool area in time for summer. Quickest way i can do that is sell the car and plunge all the funds from that into it, that being said the older i get the less i drive it and it deserves to be enjoyed.
The car is not show quality, it has car park dents etc. It has seen the track with the previous owner and myself, ive managed a 12.7 @ ~120MPH with a 2.4ft 60ft from memory meaning it still has a lot left to give and the previous owner did some drift meets in it.
Pearl White (bit of clear coat peeling on read drivers side door)
Tein Coilovers
adjustable Front arms
Adjustable rear camber arms
FMIC
factory 5 speed r154 Rebuilt and strengthened with landcruiser 1st/2nd gears, rock crawler strengthened bearing carrier plates, custom shot peened cnc thrust washer
clear headlight lenses
18x9.5 +35 Rota's (Genuine rota's at that!)
Recently replaced all wheel studs with longer and stronger ones
Custom exeady hd ceramic single plate clutch with alloy flywheel (~15k on clutch)
Alloy Radiator
264BC cams + cam gears (installed less than 1 tank ago)
Precision 5556 ball bearing turbo
precision 46mm external gate (plumb back)
6 boost manifold
walbro in tank fuel pump
sard 800cc injectors
Haltech ps2000 tuned by WTF auto (tuned less than one tank ago)
TRD diff bushes
TRD 2 way diff (rebuilt less than 5k ago)
Uras boot bobtail
3" stainless dump pipe
3" exhaust
Garrett Turbo Beenie
Im sure ive forgotten a few things here and there but thats the brunt of it.
makes ~415hp at the wheels @ ~21psi
Its a nice responsive setup and pulls hard to the red line which has suited street and light track duties really well.
Comes with all the spares i have which i wont go into too much as i cant remember everything i got laying around. Have a set of side skirts waiting to go on the car, just need prepping and fitting nothing major, just been dragging my ass getting it done. Also have another rear drivers side passenger door in pearl white that has 0 clear coat fading which ill include and a driver side seat rail.
As per usual test drives will be done by me until something is negotiated etc etc etc
http://i257.photobucket.com/albums/hh206/disc0-dan/jzx902.jpg (http://s257.photobucket.com/user/disc0-dan/media/jzx902.jpg.html)
http://i257.photobucket.com/albums/hh206/disc0-dan/jzx90.jpg (http://s257.photobucket.com/user/disc0-dan/media/jzx90.jpg.html)
The following two images show test fit of side skirts
http://i257.photobucket.com/albums/hh206/disc0-dan/Mobile%20Uploads/20150218_195640.jpg (http://s257.photobucket.com/user/disc0-dan/media/Mobile%20Uploads/20150218_195640.jpg.html)
http://i257.photobucket.com/albums/hh206/disc0-dan/Mobile%20Uploads/20150218_195446.jpg (http://s257.photobucket.com/user/disc0-dan/media/Mobile%20Uploads/20150218_195446.jpg.html)
Looking for $13750ono
Contact via SMS 0402077213 or PM
The car is not show quality, it has car park dents etc. It has seen the track with the previous owner and myself, ive managed a 12.7 @ ~120MPH with a 2.4ft 60ft from memory meaning it still has a lot left to give and the previous owner did some drift meets in it.
Pearl White (bit of clear coat peeling on read drivers side door)
Tein Coilovers
adjustable Front arms
Adjustable rear camber arms
FMIC
factory 5 speed r154 Rebuilt and strengthened with landcruiser 1st/2nd gears, rock crawler strengthened bearing carrier plates, custom shot peened cnc thrust washer
clear headlight lenses
18x9.5 +35 Rota's (Genuine rota's at that!)
Recently replaced all wheel studs with longer and stronger ones
Custom exeady hd ceramic single plate clutch with alloy flywheel (~15k on clutch)
Alloy Radiator
264BC cams + cam gears (installed less than 1 tank ago)
Precision 5556 ball bearing turbo
precision 46mm external gate (plumb back)
6 boost manifold
walbro in tank fuel pump
sard 800cc injectors
Haltech ps2000 tuned by WTF auto (tuned less than one tank ago)
TRD diff bushes
TRD 2 way diff (rebuilt less than 5k ago)
Uras boot bobtail
3" stainless dump pipe
3" exhaust
Garrett Turbo Beenie
Im sure ive forgotten a few things here and there but thats the brunt of it.
makes ~415hp at the wheels @ ~21psi
Its a nice responsive setup and pulls hard to the red line which has suited street and light track duties really well.
Comes with all the spares i have which i wont go into too much as i cant remember everything i got laying around. Have a set of side skirts waiting to go on the car, just need prepping and fitting nothing major, just been dragging my ass getting it done. Also have another rear drivers side passenger door in pearl white that has 0 clear coat fading which ill include and a driver side seat rail.
As per usual test drives will be done by me until something is negotiated etc etc etc
http://i257.photobucket.com/albums/hh206/disc0-dan/jzx902.jpg (http://s257.photobucket.com/user/disc0-dan/media/jzx902.jpg.html)
http://i257.photobucket.com/albums/hh206/disc0-dan/jzx90.jpg (http://s257.photobucket.com/user/disc0-dan/media/jzx90.jpg.html)
The following two images show test fit of side skirts
http://i257.photobucket.com/albums/hh206/disc0-dan/Mobile%20Uploads/20150218_195640.jpg (http://s257.photobucket.com/user/disc0-dan/media/Mobile%20Uploads/20150218_195640.jpg.html)
http://i257.photobucket.com/albums/hh206/disc0-dan/Mobile%20Uploads/20150218_195446.jpg (http://s257.photobucket.com/user/disc0-dan/media/Mobile%20Uploads/20150218_195446.jpg.html)
Looking for $13750ono
Contact via SMS 0402077213 or PM