PDA

View Full Version : Parting out Turbo A MA70



iluv2moan
30-04-2012, 07:36 PM
hey everyone,

bought a 88 turbo A supra which was converted to 1uz with aftermarket ecu system for the manual setup and the ecu - together with a few other bits and pieces related to gettign a 1uz runnign in an a70.

the condition of the rest of the car is shocking but if some one is lookign to build a 10 sec supra on a budget orelse needs and bits and pieces - send me a pm as the car needs to go asap!

at this point in time i will be holding on to the running gear/driveline (1uz that is in the car will be for sale shortly after) together with the turbo a front bar and rear hatch sun shade.

car is regod and licensed with the V8 motor till 02/07/2012

Since i have only very recently picked it up and yet to give it a thorough look over - please dont query me on condition of parts at this point in time. I wont have the time to check untill next tuesday. all i can comment on is that i have driven it about 20 ks to where it is currently parked and took the time (all of about 2 minutes) to take the following pics

car has to go ASAP so if their is no interest in the regod shell in the next week - I will cashign in rest of the rego and removign only the easy to get off parts and gettign it scrapped.

as for price - lets say $500

i will more then likely not need the engine mounts so if thats the case - will include in the sale of the chassis, otherwise will sell seperately

http://img805.imageshack.us/img805/4582/p5020319.th.jpg (http://img805.imageshack.us/i/p5020319.jpg/)
http://img259.imageshack.us/img259/9873/p5020320.th.jpg (http://img259.imageshack.us/i/p5020320.jpg/)
http://img403.imageshack.us/img403/4131/p5020322.th.jpg (http://img403.imageshack.us/i/p5020322.jpg/)
http://img163.imageshack.us/img163/2994/p5020323.th.jpg (http://img163.imageshack.us/i/p5020323.jpg/)
http://img715.imageshack.us/img715/7065/p5020324.th.jpg (http://img715.imageshack.us/i/p5020324.jpg/)
http://img252.imageshack.us/img252/7008/p5020325.th.jpg (http://img252.imageshack.us/i/p5020325.jpg/)
http://img827.imageshack.us/img827/6572/p5020326.th.jpg (http://img827.imageshack.us/i/p5020326.jpg/)
http://img535.imageshack.us/img535/2993/p5020327.th.jpg (http://img535.imageshack.us/i/p5020327.jpg/)
http://img717.imageshack.us/img717/4205/p5020328h.th.jpg (http://img717.imageshack.us/i/p5020328h.jpg/)
http://img3.imageshack.us/img3/702/p5020329.th.jpg (http://img3.imageshack.us/i/p5020329.jpg/)
http://img835.imageshack.us/img835/8175/p5020330.th.jpg (http://img835.imageshack.us/i/p5020330.jpg/)
http://img265.imageshack.us/img265/6708/p5020334p.th.jpg (http://img265.imageshack.us/i/p5020334p.jpg/)
http://img42.imageshack.us/img42/4247/p5020335.th.jpg (http://img42.imageshack.us/i/p5020335.jpg/)
http://img713.imageshack.us/img713/4095/p5020336.th.jpg (http://img713.imageshack.us/i/p5020336.jpg/)
http://img860.imageshack.us/img860/9251/p5020337.th.jpg (http://img860.imageshack.us/i/p5020337.jpg/)

iluv2moan
01-05-2012, 06:11 PM
perth pick up only - first person whos happy to direct deposit and wait a week till they removed from car gets them

wheels with tires - not sure about tread - assume none - but bonus if there is $150. (gun metal grey in colour)

tailights - one of the few parts on the car in good condition $150

rear leather seats - in decent condition for age $50

ugly as fuck wooden steerign wheel with boss kit $50

trust/greedy mechanical boost guage $70

brake calipers/rotors all 4 corners $80

suspension - havent looked under there to see what they are but car sits pretty high.. if stock $60, if biltein or somethign turbo a specific $100


will add parts as they come to mind

booyakasha
01-05-2012, 06:43 PM
Give us a call on 0415 959 134 in regards to wheels and parts.

Thanks
Troy

Lump
01-05-2012, 07:24 PM
details on boost gauge-
diameter, colour, units?
thanks

iluv2moan
01-05-2012, 07:34 PM
bad pic but looks like this http://t1.gstatic.com/images?q=tbn:ANd9GcRVFbSV3wXXVFZalqem1nVcw0diAbklZ e5ExAyB4E4opRAdUoW3spS2rR85Bw

Lump
01-05-2012, 07:46 PM
looks to be 60mm, sorry not interested.