4 x 100 spacers

[Brett_J]

20mm or thicker if possible, need 4.

[JT3]

Depending on how much you want to spend and if you're willing to wait a fortnight, you can get it from here: http://www.ezaccessory.com/

You will need to get the hub centric rings also.

[Brett_J]

Self centering nuts would negate the need for hub centric rings I would imagine.
If I can't find anything local I will try this mob.

[mys1]

Self centering nuts would negate the need for hub centric rings I would imagine.
If I can't find anything local I will try this mob.

Hub Centric rings take the load off the studs and put it through the hub wich is stronger

If you rely on Nuts, all the prsuure goes through the studs and you run the risk of looking like a mad dawg drifter with a wheel thats ripped a guard off....

[Brett_J]

Unless the hub centric ring is bolted to the hub and the wheel then the studs will still take all the load still!

[mys1]

Unless the hub centric ring is bolted to the hub and the wheel then the studs will still take all the load still!

Not verticle load...