-Luke-
29-03-2012, 01:41 PM
Guys,
Looking to swap a 50mm turbosnart (chinaspec) Gate i have for a 45/46mm unit of similar quality. The 50mm unit is too big for my needs.
Pic:
http://i2.photobucket.com/albums/y3/slylux/1million%20dollar%20sale/IMG_0792.jpg
Brand new/Never fitted. I have stripped the unit and tidied up a couple of bits and pieces. The gate seals perfectly. Has two springs 5lb and 6lb for around 12lb cracking when both installed.
Both flanges installed. Inlet flanges has a 50mm steam pipe 90deg elbow tacked to it. This goes with the gate or can be removed if you only want the flange.
Located NOR
cheer
Luke
Looking to swap a 50mm turbosnart (chinaspec) Gate i have for a 45/46mm unit of similar quality. The 50mm unit is too big for my needs.
Pic:
http://i2.photobucket.com/albums/y3/slylux/1million%20dollar%20sale/IMG_0792.jpg
Brand new/Never fitted. I have stripped the unit and tidied up a couple of bits and pieces. The gate seals perfectly. Has two springs 5lb and 6lb for around 12lb cracking when both installed.
Both flanges installed. Inlet flanges has a 50mm steam pipe 90deg elbow tacked to it. This goes with the gate or can be removed if you only want the flange.
Located NOR
cheer
Luke