PDA

View Full Version : Cleanup Sale, RB25/Nissan Bits



Patrick
14-03-2012, 02:34 PM
Hey lads got a few bits and pieces for sale that i have got just laying around.
Reason for sale is going another way with the car, changed a few things.

Prob not the best time to post up as flying back out soon but can organise pictures/ veiwing while im away or when i come back.



- RB25 Std Intake manifold plus crossoverpipe $150

- RB25 Std Exhaust manifold $50

- Z32 Airflow meter with plug, purchased from JPC had in cooler piping for not even 2000km $250

- Blitz Dual sbc, with wiring etc, was happy at 1.3bar then had solenoid issues at 1.5bar $120

- Superspark coils for early rb25 rb20/26 etc again less than 2000km, had troubles holding 1.5bar but were happy at 1.3-4 great for >420hp $200

- Rb25 type 2 nistune board in z32 ecu + diagnostics port, controls vct on its own. Not in case just the board $350?

- 6x std rb25 injectors, working fine on removal $50

- X force stainless rb25 hi mount manifold with tial 44mm v clamp wastegate flange, may need facing $150


Not really sure on prices for these things so PM me some offers!


Cheers Patrick

Brett_J
14-03-2012, 02:54 PM
Hey lads got a few bits and pieces for sale that i have got just laying around.
Reason for sale is going another way with the car, changed a few things.

Prob not the best time to post up as flying back out soon but can organise pictures/ veiwing while im away or when i come back.



- RB25 Std Intake manifold plus crossoverpipe $150

- RB25 Std Exhaust manifold $50

- Z32 Airflow meter with plug, purchased from JPC had in cooler piping for not even 2000km $250

- Blitz Dual sbc, with wiring etc, was happy at 1.3bar then had solenoid issues at 1.5bar $120

- Superspark coils for early rb25 rb20/26 etc again less than 2000km, had troubles holding 1.5bar but were happy at 1.3-4 great for >420hp $200

- Rb25 type 2 nistune board in z32 ecu + diagnostics port, controls vct on its own. Not in case just the board $350?

- 6x std rb25 injectors, working fine on removal $50

- X force stainless rb25 hi mount manifold with tial 44mm v clamp wastegate flange, may need facing $150


Not really sure on prices for these things so PM me some offers!


Cheers Patrick

When are you back?
Dibs on Z32 AFM

And will Nistune work in R34?
If so, Keen :)

Patrick
14-03-2012, 07:06 PM
Unsure if nistune will work in 34, i have a feeling it doesnt.
2 weeks from now mate so 29th, if you need it sooner i can organise it but would be better when im back.

Brett_J
14-03-2012, 08:25 PM
Would kinda prefer the AFM earlier.