Turbos, brakes, dump pipes + sh*tloads of other gear

[Buckets]

I've run out of room in my storage unit so all the bits that have come off my FD have got to go.

Front Brakes

http://i1192.photobucket.com/albums/aa329/johhno87/07092011172.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011174.jpg

$300 (Makes a good conversion for other cars as well)

HKS Dump Pipe (for twin turbos)

http://i1192.photobucket.com/albums/aa329/johhno87/07092011171.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011170.jpg

$100 (Has what looks to be an EGT sensor installed)

S7 Dash cluster

http://i1192.photobucket.com/albums/aa329/johhno87/07092011169.jpg

$50

S7 Twin Turbos (Type R HT12's)

http://i1192.photobucket.com/albums/aa329/johhno87/07092011173.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011183.jpg

$150 (Ideal for overhauling / upgrading to GCG or BNR Stage III)


S7 "Whale Tail" wing

http://i1192.photobucket.com/albums/aa329/johhno87/07092011181.jpg

$50 (in S7 OEM white)

Custom air filter setup

http://i1192.photobucket.com/albums/aa329/johhno87/07092011180.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011179.jpg

$100 (Suits twins and has a K&N filter, works really well)

Almost everything else you'll find on a FD

http://i1192.photobucket.com/albums/aa329/johhno87/07092011168.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011175.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011176.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011178.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/07092011177.jpg

Door trims, interior plastics, heaters, ABS units, Air con parts you name it I've probably got it.

PM me and we'll work out a price.

All items are for pick up or delivery can be arranged at the buyers expense.

Cheers

Buckets

[beatle]

what size rotor did the FD run, was it a 300x22?

[Buckets]

what size rotor did the FD run, was it a 300x22?

Brakes
Front Ventilated discs with 4-piston, floating calipers
Disc diameter/thickness,in.(mm) 11.6 (294)/.5 (11.6)
Pad area, sg in.(cm2) 14 (90)

^ Taken from http://www.rx7.net.nz/jpnspc.htm

[Buckets]

I pulled the exhaust out of the back of my pile of bits today.

It appears to be a Knightsports Legal system with a METALIT Super Cat.

These are worth thousands new.

$1400 AUD NEW for the muffler
http://www.rhdjapan.com/knight-sports-fd800ss-stainless-steel-exhaus-muffler-fd3s-62034

http://i1192.photobucket.com/albums/aa329/johhno87/26092011236.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/26092011235.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/26092011234.jpg

$1700 AUD NEW for the Cat
http://www.rhdjapan.com/knight-sports-metalit-super-catalyzer-fd3s-standard-51705

http://i1192.photobucket.com/albums/aa329/johhno87/26092011233.jpg

All for the princely sum of $1000 (neg of course :p)

Still got a bit of other FD gear lying around.

[Buckets]

As some of you know I bought a HKS T51R SPL kit because... and then my engine builder had a tantrum and didn't want to use it any of it ! :( (except for the wastegate, he likes that and it's sitting in his little engine building room, with an engraving on it to say he likes it in the pile of parts that have been engraved and polished and God knows what else that he has decided he likes enough to allow to go on one of his engines) . As such I have a HKS Stainless Steel Exhaust Manifold for 13B's and some other bit's that need to find a new home as I'm getting a custom set up instead.

As you can see it's been fitted but never used. The bloke I bought it off in Sydney had it coated it in the black coating that you can see on it I haven't done anything to it other than box it up.

http://i1192.photobucket.com/albums/aa329/johhno87/13022012532-1.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/13022012533.jpg

http://i1192.photobucket.com/albums/aa329/johhno87/13022012534.jpg

I'll also chuck in the dump pipe (not pictured here) that came with the kit. (The V-band has been cut off but is an easy job to put it back on if you want it)

Last I checked the stainless manifold alone (not the cheaper cast iron) was going for 800+ shipping from the USA.

I'll do the whole lot for $750.

And I'll chuck in a plug for my other for sale threads while I'm at it. I've still got air intakes for RX8's & FD's (and other parts, shitloads of other parts), a brand new PPG gearbox + spare set of ratio's, a complete Knightsports exhaust system (need it gone before Mike inserts in my arse so $500 will do) including a hi-flow cat, Advan 18' AD48's to name a few all here -> http://www.antilag.com/forums/showthread.php?49606-Turbos-brakes-dump-pipes-sh*tloads-of-other-gear&highlight= and need to be goneski.