SSICK V2

[SSICK]

So as my black ute is in hibernation after a few big days out, i thought it was time to start a project for the track. Something i have no sympathy for, because seeing my black ute with wear and tear from track work started to make me cry. Its been through everything with me and i cant bare to let it go to car heaven.

My two best mates and i have done a few Ls1 conversions now (vl, vk, hq, r32 2 door and currently a r32 4 door is underway) and the r32 is the coolest one out of the lot. Ideally this car is to be used for drifting and the thought of something jap did sound good......but i just cant tear myself away from holden utes, this is my 4th.

So here it is.....
Name: Tom
Model: 03 vy ss
Color: Currently purple, i fucking hate it. so it will be painted soon enough
Engine Type: 5.7lt LS1
Engine Mods: Isky cam, trend rods, pac dual springs, rollmaster timing chain, underdriven pulley.
Power: dunno yet.
Exhaust:Pacemaker extractors, 3" dual system.
Gearbox: T56 6 speed
Diff: mini spooled 3.9
Brakes: vz r8
Suspension:Tein adjustables all round
Wheels/Tyres: 18 x 9.5 Koya RG Teks. Courtesy of Rob at Tech9.
Interior: OMP Seat, 5 Point harness, Suede drift wheel, sheetmetal switch plate.
Audio: pushrod power.

the day i bought it, after closer inspection it was extremely straight and just needed a good clean to remover concrete splatter.
http://i477.photobucket.com/albums/rr132/ssick_2008/photo7.jpg

The first step was suspension, so Tein adjustables all round were thrown in along with the vz r8 brakes off my black ute.
http://i477.photobucket.com/albums/rr132/ssick_2008/photo6.jpg

At first i was just going to bang a cam in her and be done with it, but after dropping the oil and seeing the state of it, we decided to pull the motor out and give it the once over. All the rocker gear, sump, timing assembly was removed and given a decent clean. new timing chain, double valve springs and trend pushrods were fitted.

http://i477.photobucket.com/albums/rr132/ssick_2008/photo5.jpg
http://i477.photobucket.com/albums/rr132/ssick_2008/photo4.jpg
http://i477.photobucket.com/albums/rr132/ssick_2008/photo10.jpg

I removed the whole wiring loom from front to rear and started again. The complete dash was removed and just a sheetmetal panel carbon wrapped was put in place. Less is best here. The entire cab was painted matte black and the cage painted vibrant red. (needs a few touch ups as im not skilled in painting)

http://i477.photobucket.com/albums/rr132/ssick_2008/photo9.jpg
http://i477.photobucket.com/albums/rr132/ssick_2008/photo11.jpg

The old fuel tank was thrown out and a new 40L ali was put in place, along with a bosch 044, aeroflo filter, aeromotive reg and a combo of speedflow fittings.

http://i477.photobucket.com/albums/rr132/ssick_2008/photo3.jpg

Early last year i installed a milling machine at the tech9 stable so they could drill out there own rims, with the thought of having something jap on my black ute i just didnt get around to it because it was never seeing any road time. After some thought it was just easier to buy something jap looking and play around with spacers to get the look and ride i wanted. So tech9 hooked me up with these for a price no one could beat. Not sure if ill leave them gun metal or paint the red....
http://i477.photobucket.com/albums/rr132/ssick_2008/photo.png
http://i477.photobucket.com/albums/rr132/ssick_2008/photo8.jpg
Currently just need to put the motor back in, get my clutch back and get an exhaust built.

BURNOUT.

Massive thanks to two of my best mates Brendon (LS1R32 owner) and Pat (LS1RX7 owner) and of course Mitch and Deb at Waperformance. Nothing would be going on with out these people.

enjoy.

[SEXUAL TYRANNOSAURUS]

not shy.

Unless i was to busy 'reading' though the pics. what do you plan running it on fuel wise... Meth?

[Mad_Aussie]

*tear

Looks awesome dude, Needs some dirty big jap rims on it.

[SSICK]

Still not 100% sure yet. Meth is definitely on the cards though.

[SEXUAL TYRANNOSAURUS]

*tear

Looks awesome dude, Needs some dirty big jap rims on it.

be different and Rock tri-spokes!
Alem likes this


Still not 100% sure yet. Meth is definitely on the cards though.

give me a call when you make a decision. My 'contact' will look after you in regards to meth.

[ED40]

Fucking absolutely awesome dude. Will it be seeing powercruise this year? Is this going to be a dedicated drift car? Or is it going to see drift and circuit?

[Miggy]

Burnout! Does this mean that the black beast will be back on the road again?

[PSI 304]

Looks like it should fit the bill just nicely :) All these dedicated racing cars make me wish i could fund one :( Keep rims gunmetal though definately

[SSICK]

Main aim is to drift it to put a smile on my face.

Not sure whether to bring this one or the black one to powercruise, see how well it can go around the track first.

Miggy - the black one will be out soon enough. Its in getting a makeover.

[H1GHROLLR]

LIKE !

[ForgedV6]

Awesome build boss! Leave the purple i say, its suits you down to a tee :D

Good to see you stick with Holden also and running meth will certain have its benefits. Have you thought about running it on a 50/50 mix of 98 & e85? Might be slightly cheaper and still have some benefits.

You and you mates do LS1 conversions ay..... I will soon have a VK shell after i transplant the Ecotec into a VB. May have to send you a PM :)

[NVIOUS]

niiiiiiiice, would love to build something with a manual for track/drift fun one day...

[SSICK]

Well meth is outlawed on the drift scene......so e85 could be the way to go.

It is not staying purple. It annoys me to think i own a purple ute.

[stumps.]

Do you have any pics with those wheels on?

[SSICK]

not yet.

[Tocchi]

Well meth is outlawed on the drift scene......so e85 could be the way to go.

It is not staying purple. It annoys me to think i own a purple ute.

just do it. they have enough issues getting the twists out of their underwear over which corners etc.

[Chompy]

i just got wet in the pants!
great progress so far tom :D

[ED40]

Sweet. Looking forwrad to seeing it out on the track again.

[Slip_]

That is indeed sick. Well business.

[Tre-Cool]

very nice

im with you on the colour. cant say im a big fan of the purple nurple.

what you going to do with the hard cover?

also wow on the engine that thing has oil burnt into it!

[Torquen]

Mmmmm om nom nom! Sweet build Tom :) Can't wait to see this in action.

[ForgedV6]

I would also like to see [SSICK V2] on the number plates just so i can spot it out on the track :)

Regardless of the car being registered or not, not being the assumption here?

[SSICK]

That hard cover is just for when its stationary to protect fuel system from the weather. Has a nice big crack down one side. I've got SSICK plates for this ute already.

[mitchy]

SSICKER

[SSICK]

Nah my other ute is better than this one.

[Scaf]

All business, i like.

[DanWA]

very nice Tom

did you pull the balancer with or without the box on the back?

[SSICK]

without. had it on a stand.

[SSICK]

yeah but you're a girl. girls like gay colours.

[miss_petepie]

love the purple, each to their own but :) would be alot of fun for a track car!

[Turbo2.6L]

Nice one Tom!

[lambchops]

very nice man. definately run e85, you'll get heaps more torque for the little extra!

glad to hear the black one is getting a makeover after the collie incident. nice work!

[SSICK]

thanks stu. yeah will weigh up my options.

pete_pie - not sure how my comment was posted before yours.....i replied to it. craaaaazy goin back in time n shit.

[mitcho]

Looks wicked, will be good to see you out on track again tearing it up and showing the jap cars what for!

Whats the deal with not running it on meth? I think thats only for the ADGP series?

[miss_petepie]

thanks stu. yeah will weigh up my options.

pete_pie - not sure how my comment was posted before yours.....i replied to it. craaaaazy goin back in time n shit.

I saw that too and was confused also.. lol!

[lazy6]

looking good dude, waynos tonner should be back on the drift scene too! your 2 utes head to head would be mint!

[S133LTR]

how did you go getting the spacers made up for the wheels? They should look great on the vy.

[TJ]

Good work Tom!

[-Luke-]

Nice one mate, should be a fun setup when its finished!

Explain the fuel reg se tup to me tho...?

[SSICK]

Cheers guys.

Fuel comes out of the tank, through the pump, through the filter into the reg, return from the reg goes straight into tank, out of reg to fuel rails...

[-Luke-]

How does the reg maintain pressure feeding the rail and not restricting the return?

EDIT: Im not trying to be a smart arse just curious as to how plumbing it this way would maintain pressure in the rail?

if the pump fed straight to the rail and the return was plumbed into the port the pump is in I could understand it?

[mitchy]

How does the reg maintain pressure feeding the rail and not restricting the return?

i think you'll find the purpose of a fuel regulator is to restrict (regulate) the return, thus pressurising the rail.

[-Luke-]

I think you'l find the way its plumbed now there is no restriction in the return from the rail

[rat]

What a pig, great work Tom! I'm so jealous...

What colour are you going to paint it? Maybe stickerbomb the whole car instead??

[mitchy]

I think you'l find the way its plumbed now there is no restriction in the return from the rail

they run a return-less system from the rails, the fuel is essentially bled off via the reg.

[-Luke-]

Thanks. return less fuel system answers my question. So the hose on the RH side of the tank is only a breather then?

[SSICK]

Bingo.

Car will be black. No sticker bombing for me damo.

[lambchops]

looking good dude, waynos tonner should be back on the drift scene too! your 2 utes head to head would be mint!

waynos tonner got written off?



lol at stickerbombing! fuck doing that on a nice car!

[R8 ute]

Nice, loving the purpo.

[YOUR MATE]

Flamingo Pink will look way better.

[Gladio]

Shall be awsome once finished :D

[SSICK]

how did you go getting the spacers made up for the wheels? They should look great on the vy.

getting them thru wheelworx. see how they turn out on the purple ute and i might get another set of these rims in white for the black ute.

[Jimmy_S]

Great work! Love the wheels!!

[SSICK]

Cheers Jimmy.

Ive fucked the ABS off and will redirect the brake lines.......but first i need to source 2 x hydraulic handbrakes.....ASAP. any info or contacts for them? Have tried PZP, Just Jap, X-speed, bout to give JWS and JPC a call.

[Deke]

hey tom , you could also give go gear a call , or that shop that is now in the place of where J shop use to be in welshpool , not quite sure of the name. last option would be ebay plenty on there.

[SSICK]

yeah i need them asap.

JPC, JWS, Go Gear, Wilkos.....all no deal.

[R8 ute]

I got one bare handbrake I won't use. Doesn't have fittings or hoses

[SSICK]

I'll take it mike. Let me kno what you want for it and drop it at mitchs next time ya there.

[R8 ute]

It's free, ill drop it down Monday

[INSINR8R]

Impressive.

[SSICK]

few more pics. cab pretty much done. need to wire in digital tacho/shift lite, plumb the accumulator..
http://i477.photobucket.com/albums/rr132/ssick_2008/photo12.jpg

Seat in and mounted, harness almost done.
http://i477.photobucket.com/albums/rr132/ssick_2008/photo13.jpg

Manifold, fuel rails and injectors ready to go, had to modify the rail mounts as they didnt fit which was strange....towel gasket not recommended.
http://i477.photobucket.com/albums/rr132/ssick_2008/photo14.jpg

[mitcho]

Looks like a pingpingpingping to get in/out of!

[SSICK]

Yeah, being 6'4" doesn't help me either. It's not too bad.

[vy--ss]

Looks good Tom
Cage looks great in red too

[ForgedV6]

Whats the time frame for completion and smoke show for this mate?

[Tre-Cool]

who did your cage and what did it set you back?

[SSICK]

no idea who built it, mitch or deb might be able to tell you. but my mate welded it in for me. and it was free.

looks like the guy who is rebuilding my clutch has gone MIA. so once i find him or find a new clutch, then the motor can go in and then i can enjoy it.

[Kilma]

looks like the guy who is rebuilding my clutch has gone MIA. so once i find him or find a new clutch, then the motor can go in and then i can enjoy it.
Not having much luck with this car, are you. Good to see you are persisting though. Looking forward to seeing the results.

[R8 ute]

I also got a ceramic clutch plus lightwieght flywheel in shed. Only done 5000ks or so, but it is for a ls2. If ur keen I can see if Mitch will take a look at it male sure its suitable. Will be cheap also.

[SSICK]

Yeah I'll swing in and see them today and ill ask. Cheeeeers man

[Jumanji]

Freaking awesome mate, keen to see this link corners at Barbagallos!

[2nd2nun]

Yer this is real cool Tom, keen to see how it goes around Barbs !

[Scaf]

When is the SSICK merchandise being released? Keen for a t-shirt.

[SSICK]

Lol you won't find me flogging off t shirts and stickers anytime soon scaf, maybe if you bring back bogan Dan scaf I could sort something out!

[Scaf]

The more i try, the more Leb he gets.

[ForgedV6]

When is the SSICK merchandise being released? Keen for a t-shirt.

Also keen hahahahahahaha.

No, seriously.

[SSICK]

Weeeell I've had the black one back for 3 hours ad am currently on Nicholson rd in canningvale and she decides to run out fuel. Good one!

Go see MRC they sell t shirts. You would prob get bashed r stabbed if you wore a SSICK shirt out.

[SSICK]

The guy rebuilding my clutch has decided he knew someone who wanted it more than i did.......because i got to his house and all he had was my flywheel. Not fucking happy. Couldnt tell me where my clutch was.......and another car rocked up while i was there and he didnt have their shit either.....

So another person to add to my list of dog pingpingpingpings.

New clutch is on its way. Hi 5 to Waperf.

[Kilma]

NAME AND SHAME!!

That's a low move.

[180SXTCY]

Is it just me, or do you seem to get fucked over alot?

[Gleeso]

Well thats fucking shit.

Name and shame definitely!!

[-Luke-]

FUCK!, That's Bullshit. Nothing worth removing from his house in exchange for the missing clutch?

[SSICK]

mmmm would seem so lately.

[SSICK]

I only know him as Scott, lives off Rowley Rd Byford area.

Not going to incriminate myself by saying i would steal shit off him....

[rat]

Address? I need a new skid spot.

[R8 ute]

Fuck what a dog.

Did you pay him in full before you recieved clutch or something? So many dodgy fucks in the car industry, i hope its the last time for ya.

[SSICK]

Haven't paid him anything. still doesnt mean he can sell my clutch.

Yeah well its not the last time.......

[180SXTCY]

^gooo on...

[SSICK]

Think ive worked it out.

[S133LTR]

Same Scott that had auto clutch in ozy park?

[esky]

the one that's gone bust?

[SSICK]

Pretty sure thats him.

[S133LTR]

Yeah, just had his job rectified so I can pick up some gears in my car again.

[SSICK]

He didnt look in a very good way yesterday.

[31-EVO]

Personally, who fucken cares, hell shitpingpingpingping move

[Chompy]

Dog act from hell!

[SSICK]

Motor and box are in, everything is plumbed up. Just need a few peculiar fittings and to clean up and bolt extractors in.........then burnout. Cant wait.

[Kilma]

1 week later, no burnout pics. :(

[SSICK]

Haha sorry Damon. It was driving today, just needs a tune. Will make it's debut in collie. Pics and vids will follow.

[DanWA]

Which club event Tom? PM if you wanna

[SSICK]

There is an event on the 4th of sept and then cda5 2 weeks after.

[Kilma]

Good to hear it's moving forward still.

[SSICK]

Will be taking the ute out to drift prac next friday night to stretch its legs and get a feel for it. Hopefully have it tuned early next week.

http://i477.photobucket.com/albums/rr132/ssick_2008/photo15.jpg
http://i477.photobucket.com/albums/rr132/ssick_2008/photo16.jpg
http://i477.photobucket.com/albums/rr132/ssick_2008/photo17.jpg

[180SXTCY]

fuk yes that looks sweet!

[mitcho]

Fuck yea! This thing is a beast now. Will hopefully see ya at drift prac!

[SSICK]

Definately be there. Will be doing the drift burnout day too. Want to get as much seat time as possible before CDA......need to bump Brendon in the VK out for top aussie drifter haha.

[ForgedV6]

Where is drift practice?

[SSICK]

barbagallo

[ED40]

fucken joy car dude.. Will u be drifting at PC? if so, cant wait to see it up close..

[XF Falcon]

Looks great !!

[SSICK]

Carl - im not sure which car ill be taking to PC.

Mike - thanks mate.

[family guy]

Both perhaps :)

[Chompy]

all i can say is this will be a track weapon! love the dedication Tom

[lazy6]

cant wait to see it big fella! waynos tonner should be getting the panel and paint done soon , would love to see both utes on the track in a battle.

[SSICK]

Is he still going with a carbon front end? He mentioned it at the last cda.

[80shovelhead]

lookin awesome, wont be able to make it down to drift prac, but hope to see ya kill it the collie drift comp

[SSICK]

Tuned tonight by Mitch, made 416rwhp. Extremely happy with it.

Just have to learn how to drive it now, though with the cage and fixed seat i feel a little too close to the wheel as my arms and legs aren't as extended as in my black ute..... it feels a little odd and will take some getting use to.

Can anyone shed some light on shortening the steering column?

[Turbo2.6L]

Do you plan on running all the covers/shrouds around the column Tom? If not, i'd imagine it would be as simple as taking the column to someone that is able to cut/weld it straight & put it back in. May affect the height as well though, so be mindful of this before cutting!

[Azrian]

Convex steering wheel. I hear they are cool these days.

[SSICK]

The ute is completely stripped dean, so cutting welding is an option. Mitch and the boys wanted to cut my arms shorter though haha.

Adrian that idea was looked into aswell haha.

[Turbo2.6L]

Cut arms & let me drive in the interim while you heal. Done!

[Marti]

I think I saw you at Bp south street yesterday morning, rims suite the car well, nice looking car

[Yakky Bear]

nice!

[SSICK]

I think I saw you at Bp south street yesterday morning, rims suite the car well, nice looking car

was in my black ute with white wheels yesterday.....this one was on a trailer in the morning and then at about 3 in the oconnor area.

This ute looks far from nice. will be painted next week.

[R8 ute]

That's a pretty decent power figure for the ol ls1 should defiantly turn a tyre or two. Is there no room to move the seat back at all? Adam put the seats way back in mine, I can just reach the excelorator as it is.

[SSICK]

the seat is about 200mm from the rear firewall (without a cage my seat is hard up against that.) With this cage and fixed seat i lose that 200mm and it just makes me feel like my arms and legs are bent too much. Like im going to push the clutch through the firewall when cog swapping.

Cheers for the handbrake too man, looks and works a treat. Will be fighting Scott for your triple plate next.........:P

[Marti]

was in my black ute with white wheels yesterday.....this one was on a trailer in the morning and then at about 3 in the oconnor area.

This ute looks far from nice. will be painted next week.
Yeah I saw the one with the white rims aswell, rim suite the car I like ha ha

[R8 ute]

I forgot my cage went through the back of the tray, I guess being tall must have its disadvantages sometimes.

No probs man with the handbrake, when will the burnout pictures be loading. I think Mitch has someone keen on the triple plate also, may be gone next week. Let us know when ur at barbs next keen too see it in action.

[SSICK]

had it out at drift prac tonight, went pretty well. It had an extra 500hp due to the rain for the first hour or so, once it dried up it was a bit more stable and controllable. Still managed to spin a couple of times. Had an extreme vibration towards the end of the night as the rear end got out of shape, felt like diff bounce but would come in after i had it sliding.....wierd. Collie on Sunday to keep me going, cant wait.

[SSICK]

Had a killer day yesterday down in Collie. The weather was shit for the first hour or so but was kind of good in a way that it was easy to slide around and learn the car without massive speed. Then the track dried up and all hell broke loose. The boys in our LS1 R32's were getting 4 laps to a brand new set of federals and Pats 32 was throwing out flames. Managed to get around the track a few times without spinning and got to try the hydro handbrake into the main hairpin.......good fun. The diff bounce was getting more violent so ill be changing all the rear bushes and seeing if i can adjust the Teins or maybe swap them out for the Koni's from the black ute.

Outright 1st - WA Perf Ls1 R32 2 door -Brendon
Outright 2nd- WA Perf Ls1 R32 4 door -Pat
Outright 4th - WA Perf VY ute -Me

1st place Aussie muscle drifter - Wa Perf VY ute - Me.

Massive thanks to Brendon and Pat for helping put the ute together otherwise it would still be sitting in my garage looking stock, and a major thanks to Wa Performance Mitch and Deb for help and support for us 3 guys.

Still have a smile on my face from yesterday.

[Azrian]

Nice one mate but where are the pics and vids?

[Turbo2.6L]

Great result for WA Perf & yourself Tom!
How did you go with seating position? Did you leave as is, or modify something??

[mattyb89]

http://www.youtube.com/watch?v=NWsFjbvsRzk just watched this had a couple of you in it

[SSICK]

Left it as is Dean, it wasn't too bad actually. Ill fuck with it after the next event in Collie in 2 weeks.

As for pics and vids, give it a few days and im sure they will come. Mini was there with us but kindly helped out as a flag marshal (CHEERS MINI) at the back chicane so didnt get any pics. I met 5ltrs of fun down there and he was filming a bit. Nice to meet you mate!

The 2 skylines were a major hit with everyone, had lots of people talking.

[INSINR8R]

Awesome stuff, Congrats Tom.

[Scaf]

Good stuff Tom, looking forward to some vids.

[ED40]

Congrats dude! Just saw the vid and you have improved heaps since i saw you last! I've never drifted at Collie, what is it like compared to Wanneroo?

[SSICK]

probably not the best person to ask as i have only ever 'drifted' wanners on friday night just gone. I like collie better as the walls are further from the track haha. Id say for the top guys wanners is a much faster track.

come to CDA5 in 2 weeks. we really need the numbers for this to go ahead. $315 gets you 2 days drifting and a dick load of track time, beers and a bbq.

[ForgedV6]

Nice effort Tom! Must be good bloody fun. Keep it up mate.

[ED40]

I'd love to Tom but I get back from work on the Sunday arvo, so really bad timing for me. :( Are there any drift events at Collie in October? Unfortunately I have only got 1 month in Perth off as I do a 6month on/1month off swing. Already lined up Powercruise and no limits on the 20th, most likely go in an AHG or Midvale day aswell so it's going to be pretty chockers.. Powercruise has drift but not enough to cure the appetite haha.. if you know of anything, please let me know!
Cheers dude.

[SSICK]

6 month swing? holy fuck! fuck being you hahaha.

yeah ill keep you posted if anything comes up.

[SSICK]

http://www.flickr.com/photos/randomguymedia/6115573181/

[SSICK]

Adjusted the rear shocks and replaced the standard subframe bushes with new nolathane items, hopefully it kills the diff bounce.

[SSICK]

Lil update,

ute has had a few more outings and im alot more comfortable in it now, definately dont have drifting mastered yet but i can say that i can drift the whole of wanners now. Have been to collie for the drift and burnout day and walked away with 4th overall and 1st aussie drifter, CDA5 in collie too, had heaps of fun. Went to wanners for the all day drift prac last sunday......had a smile on my face all day.

still needs a lick of paint. ashamed to say its mine still.

http://i477.photobucket.com/albums/rr132/ssick_2008/386687_10150344916091370_616786369_8443922_9862390 73_n.jpg
http://i477.photobucket.com/albums/rr132/ssick_2008/381501_10150345071836370_616786369_8444516_2108711 313_n.jpg

Thanks to Chris Karapetcoff for the pics.

[rat]

Sweet pics, any vids tom??

[SSICK]

i got 2 or 3 very quick clips in this vid.....its pretty long but worth the watch.
<iframe width="560" height="315" src="http://www.youtube.com/embed/ySVXgUPmLx0" frameborder="0" allowfullscreen></iframe>

and a few little clips in this one. getting my go pro tomorrow so more vids to come.

<iframe width="560" height="315" src="http://www.youtube.com/embed/fQMjYV_CXZc" frameborder="0" allowfullscreen></iframe>

[rat]

Yeh those are mint vids!!
GoPro's are boss, I farken love mine. The Hero 2 will be even better!

[Turbo2.6L]

Looking good Tom! Will be at next Drift Prac to check this, Brendan's 32 & Mini Mitch's 32 out!!

[Chompy]

would love to see this on the track, the WA perf guys really have it sorted with whats going on. goodluck for the future in the ute tom, looks like lots of fun

[ED40]

Looks hot as hell on track!

[SSICK]

Cheers guys. Its a shitload of fun.

[Don]

very niceeee.......that was a great start to a build!!! as you tore it down and started from scratch (which is the way to do it!!!) well done!!! :)

also wanted to say congrats to yourself and WA Perf .......pics look goood :) you must be having a ball in it!!! :)

[SSICK]

The support Brendon, Pat and Myself get from Mitch and Deb is fucking awesome. Late nights, plenty of phone calls, part swapping and some of the ideas they come up with is fantastic. Couple that with the reliability of our cars and it sure makes for a winning combo. The boys skylines definitely get the tongues wagging on and off the track. You can hear the tyres start to cry as soon as the ignition is turned.

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/313063_10150345071321370_616786369_8444513_1681252 157_n.jpg
Both skylines run 350+rwhp LS1 V8s

[SSICK]

FOR SALE 14K.

see for sale section