shed ornament no:2

[kurbn]

After years of wanting and pining I finally put a deposit down on my new fortnighter/monthly driver.

I have been looking for a 33 series 2 thats been looked after with your usual mods but nothing too modded in fear of the motor being cactus. I wanted something clean inside, clean and straight outside and perfurably in white.. Oh did I mention I wanted something witha GTR rear wing, coilovers, exhaust and a clean engine bay? Well I found one!

96 R33 Series 2
130,000 Kms

- 9psi boost (going to wind it up to 12)
- Twin plate clutch
- new STD coilovers (not sure how good they are yet :S)
- Front mount
- Bosch 040 Fuel pump
- Greddy EBC
- Nismo GTR wing
- New Tyres
- Alpine R speakers with sub and amp (bonus more than anything)

http://i752.photobucket.com/albums/xx164/bangnrb25/d930e685.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/949d361f.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/22f8eac9.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/430091c_20.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/8205999_20.jpg

The interior is bullshit clean, its imaculate, Carpets and skyline floor mats were so clean I took my shoes off before I got in it.

Engine bay was spotless, no rust from seams like most of the 33's do. Not one spot of oil on the block or bellhousing. Even the control arms were still clean and didnt have any greasy buildup..

There are a couple of things I want to do straight up
- Remove Nismo, Greddy and no smoking sticker
- Buff the crap out of the headlights and give the car a good polish and clean
- De-dust the engine bay
- Replace the mismatched rims with something else.. not sure yet on what

Picking this up next weekend.. absolutely stoked with the purchase. Its just going to be something im going to drive every now and then, im not going to pour money into it like the Silvia but il throw some stuff at it every now and then

[DanWA]

Does look very clean indeed, especially for a super common white one!!

Rim plans? If its anything like your 32 it will be bullshit clean!

[Buckets]

Nice find mate. Loose the stickers and P plates and your on to a winner. (I'm waiting for it to wind up as a OTT build like the Silvia though)

[jaybee]

nice purchase mate, looks very clean indeed!

[S133LTR]

33 25 into 13
26/lsx/jz into 33
?
Profit?

[kurbn]

thinking probably some rota grids in bronze at the moment, I know they are china but Il get something of quality later, got to be better having a matched set of china rims than mis-matched :)

[Sfidz]

If you are not looking for hardcore fitment perhaps the Rota Boost as everyone seems to have the Grids now..

[thrtytwo]

Looks clean mate. Nice pick up.

[Gladio]

For a white 33 that is actually pritty clean, I like the wing too cant stand the stock one lol

[kurbn]

been speaking to Wei at Vision R about new rims for this and was very helpful in giving some options

Im going for a very savage stance and trialing up some rims and colours and pick some up the following weekend

Going Rota Grids in 18"
Fronts are going to be 9.5s +20 offset, rears will be 10's +15 offset

Will either be black or bronze depending on what looks best :)

[TJ]

Need a shoot with Brockas GTR, nice match for each other

[Daisy]

Going Rota Grids in 18"
Fronts are going to be 9.5s +20 offset, rears will be 10's +15 offset


nothing like been original, only the 76th person to buy rota grids this week.

[DISTRBD]

Need a shoot with Brockas GTR, nice match for each other

Dont forget Tristans :)

[kurbn]

nothing like been original.

coming from someone who has a falcon :)

theres nothing else that I really like atm that will give it a hot stance for the money I want to spend

[YOUR MATE]

That's just it though. The money you want to spend. It's not going to be a daily driver, save a little more and get some better rims. unless they are something you actually like regardless of budget, but otherwise why sell yourself short?

[duste]

Because he's currently throwing a fuckload of time and money at an even better project?

[kurbn]

I do like them, Im very happy with them. Im just not in the position to dump 2K on some rims yet as I am saving to purchase a welder and compressor so I can start back on the silvia again. Then I need to drop some more money on my rims and suspension before I can start working on the rear guards. They need to be rolled first. Got lots of money to find atm haha, plus rego is due in a month on the 33.

It was a toss up between the Rota D Force as well in black but until I rock up to Vision R and start slapping some rims and offsets on its still not 100% what ones I will choose, its more 99% just more leaning towards the Grids.

[Azrian]

coming from someone who has a falcon :)


hahaha white 33 skyline

[kurbn]

bunch of jerks

hate on torqueless Rb20s, hate on gemini S13's, hating on whaling ships. No car is going to make Antilag happy.

Im happy, so get it up ya

[markdett]

bunch of jerks

hate on torqueless Rb20s, hate on gemini S13's, hating on whaling ships. No car is going to make Antilag happy.

Im happy, so get it up ya

Part of the totes nissan boat crew now. Very clean car mate! I didnt know vision r were still running, where are they located now?

[jesse-92]

Looks like the 33 i draged when i was on my bike last week lol

[aye.jay]

Mr money bags.
Nice pick up mate,
Will this slow the silvia build now?

[Splat_man]

Rims definately look on the dodgy side so i think picking up new ones is a good idea. ;)
But fuck that interior is clean!
So does this mean you have to update your sig? Have you sold the bora?

[kurbn]

Yeh ive sold it, guy has given me a deposit and picking it up this week. Bora is just sitting there all sad in the garage that I havnt stroked her for a month and im getting rid of it.

Il change my sig then :)

Interior is crazy clean, it looks new in all seriousness. You'll see when I take some much better pics of it

[azzada1]

looks clean as mate, can wait to see the improvement you make on it

[kurbn]

Cars being picked up Friday night and the following is happening on Saturday
- Picking up new rims
- Buying lots of cleaning products
- Remove Stickers
- Wash, Claybar & Wax
- Blacken all window/door seals
- Clean all windows
- Remove Seats and give the car a complete vac
- Start looking for future possible mechanical failures ie. Checking all the cooling system out, wheel brg play, bushes, exhaust leaks ect...

Then slap it on jackstands and get the tyres fitted up on Monday :)

very excited

[azzada1]

im keen to see what the grids look like on it, i was looking at a pair on vision r on sunday but decided my camber arms and boss kit where more important CSB

will be mean though

[kurbn]

stupid bank cheque didnt clear yesterday so I have to pick it up monday night..

meanwhile I got some presents for its big cleanup
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1418.jpg

[SLY346]

looks tough as nails mate, always had a soft spot for the r33 s2 gts-t.

[kurbn]

decided to do a warm up run on the miss's car.. Paint just looked dark blue, metalic had died down quite alot and surface was rather rough.. daily industrial area parking and infrequent washing had been the cause.. Should be good for a while now. Was quite impressed how good the Carnauba wax was, its just as good as Mequires next gen Tech wax 2. Clay bar made the paint like glass.

http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1427.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1426.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1424.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1422.jpg

[Risk10k]

Wow, that is shiny!

[billk]

good work dan

[kurbn]

Picked it up tonight, feeling a bit crook I didnt do much on it.

Removed stickers and badge on bonnet. Also gave the headlamps light polish.http://i752.photobucket.com/albums/xx164/bangnrb25/dirtyrear.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/dirtyfront.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/dirtylamp.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/dirtylamp2.jpg

after a quick wash
http://i752.photobucket.com/albums/xx164/bangnrb25/cleanrh.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/cleanlamp.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/cleanfront.jpg

car needs a clutch badly too, pedal feels like shit, throw out bearing squeels and every now and then you get like a harsh vibration.

[_oz]

nice pickup, the paint on the front panels seems abit dull though, needs a cut back and polish maybe? the headlights will come up like glass if you buff them with cutting compound

decided on wheels yet?

oh and a HHD exedy 5 puck will do the trick :) everyone ive fitted them for seems to love them :)

[Douche Bag]

Looks so much cleaner after a quick wash and headlight polish!

With the indicators clear and it'll look seriously clean imo.

[Cochee]

I think I can see an imperfection.

But seriously. That's a very clean example of a 33 you picked up. Can't wait to see the rest of the build thread.

[31-EVO]

Wish I had the patience to clean a car that much. Come do the evo pingpingpingping. That aside, that is a very clean looking series 2 33 man

[patty]

what product did you use to clean up your head lights? they came up really good

[kurbn]

wheels test fitted, umed and arrrd about offsets and colour and went for this
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1453.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1455.jpg

photoshopped.. should look hot with some cyan coloured wheel nuts
http://i752.photobucket.com/albums/xx164/bangnrb25/rota1.jpg

[Skitzo]

:(

[kurbn]

Y the sad face mang?

I used scratch x for the headlamps

[jaybee]

wait so the last pic is photoshopped?

hopefully the fitment is a little more aggressive when they are on! what size/offset are they?

[Skitzo]

Fitment is a bit weak mang.

[kurbn]

18x 9.5 35 offset for rear and 8.5 25 offset for front, the lips stick out the body a bit but not too much. Last pic is chopped yeh, they look really good in person, offset doesn't look Jewish

[jaybee]

IMO, the rota bronze does look a bit funny too, but can't really make a call until i see some pics they are on properly etc.

however, i think these would look good :) 18x9 +23

http://i53.tinypic.com/2ccxqwl.jpg

[Skitzo]

This is 18x9.5 + 35 all round.

http://www.rimtuck.com/photos/1292806908.jpg

so 5 mm less (inwards) on the rear, and cbf workign out fronts (2.5mm less?).

[Risk10k]

Sadly I have to say that fitment looks 100% perfect, but I'm sure a little less guard rub isn't going to hurt!

New car looks clean mate, I'd be very happy with something like that!

[kurbn]

Can't run 9.5 35s on the front, they scrape on the caliper.

I prefer something that's not going to scrub on hard lock and going through dips ect

[mitchy]

18x 9.5 35 offset for rear and 8.5 25 offset for front, the lips stick out the body a bit but not too much. Last pic is chopped yeh, they look really good in person, offset doesn't look Jewish

they wont stick out the body..

i had similar offsets on my 33 and they were definately inside.

[Daisy]

Im going for a very savage stance and trialing up some rims and colours and pick some up the following weekend

Going Rota Grids in 18"
Fronts are going to be 9.5s +20 offset, rears will be 10's +15 offset



18x 9.5 35 offset for rear and 8.5 25 offset for front,

what happened to the savage stance?

[Mad_Aussie]

Can always slip spacers on for wank spec photoshoots, and then take them off when you want to have a car that can be driven on the road...

[Skitzo]

Can't run 9.5 35s on the front, they scrape on the caliper.


Maybe in a +35 offset, but according to rimtuck.com and the pic i posted 8.5+30 fits fine.

I thoguht you were going aggressive stace as well, hence the sad face. If you want something practical, as stated, and cop hassle free, then you have selected well.

[fsbk]

<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/S-BGIcRBPHM" frameborder="0" allowfullscreen></iframe>

[magic1]

<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/S-BGIcRBPHM" frameborder="0" allowfullscreen></iframe>

LOL

[kurbn]

Maybe in a +35 offset, but according to rimtuck.com and the pic i posted 8.5+30 fits fine.

I thoguht you were going aggressive stace as well, hence the sad face. If you want something practical, as stated, and cop hassle free, then you have selected well.

yeh I was, turned out the aggresive stance would of poked way too much out the guards. Started thinking about a few things

- would need to pump the guards a fair bit
- fronts will scrub on full lock
- will be instant cop bait
- will need to buy a full set of tyres to meet the 10" wide rims
- also risking if any panel work has ever been done to the car any underlying bog may crack up or paint may also turn to shit

just decided I would get something that you could see the lip was level with the tops of the wheel arches and poked out a few mm, which Is what I got.

I can still go the wheel spacer option too, at least I can go legal easily then rather than trying to find some stocko rims heaven forbid I get a yellow.

I think once I lower it a bit more they are going to fill out the guards nicely.. I chose a more practical option you could say

[kurbn]

found something interesting this morning.

Vehicle has no hicas which is a complete win. However after doing a FAST check on it I found it is also is ment to have a RB25DE with an auto box. Checked the vin plate and it confirms it. Checked the turbo and its a 45V1 (series 1 33 turbo)

only makes sense that perhaps that at some point and old owner has re-shelled a GTST into this one. Its a very clean conversion at least, cant find any over ride of the neutral park switch or modified gearbox bracket which was another suprise as the 32 bodys have a different mounting points on the body for the gearbox bracket and the hole in the floor is further backwards. This is just a bolt up job.

Question lying however is do I have a hi-comp 25 or not, any way of telling? I suspect seeing that someone has gone to the trouble of swapping everything, why would you not do the motor. Engine number matches the licence papers

im still happy, just a bit suprised. Bright side is no hicas shit!

[mitchy]

doesn't FAST so the orginal engine number? changing it on the rego papers is easy.

it looks like an S1 RB25 though.

[R31 POWER]

I noticed the blue GT side badge in the pics last night and thought something was weird. Love rare white 33's.

[SimonR32]

LOL

x2 so awesome!

[kurbn]

fuck the haters, looks cock! pictures really dont do justice, hard to bring out the rims at the right colour/shadow

http://i752.photobucket.com/albums/xx164/bangnrb25/rota3.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/rota2.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1543.jpg

need to lower hard, and perhaps with some 5mm spacers its going to look even more serious

[31-EVO]

Don't mind that at all

[_oz]

lol first pic makes the car look like a gtr as the white is so bright you cant make out the geometry of the gaurds! looks good :)

[markdett]

haha me and carlo were watching all the apprentice's under the bonnet of your car having a looksy. Reminded me off a bunch of piglets having dinner/fighting for there mothers tit.

[markdett]

http://www.spraguephoto.com/stock-photos/sv0415-Piglets-feeding-from-their-mother-pig-San-Francisco-Javier%7C11114.jpg

[hako]

Looks very clean, square fitment would look tougher though, needs concave at the front!

[Scaf]

Looks harrddd. Good stuff.

[Milhouse]

Planning on lowering it ?

[kurbn]

yep, I can still slide a jack under it without having to drive it up onto bricks. Way to high, rims will look bigger too when its dropped.

Need to get me some cyan nuts for it, will finish it off nicely

[DanWA]

looking pretty awesome for a NA auto

rims set it off nicely!!!!

[kurbn]

http://i752.photobucket.com/albums/xx164/bangnrb25/0561bfe0.jpg

Lowered...

[patty]

Looks the goods now that it's lowered :)
But I think it's time to get the Silvia going hahaha

[S133LTR]

You've definitely done it justice man.. smaller wing would look alot less 'boy racer' imo..

[Halle Terry]

Much lower than Owains car, I like it.

[kurbn]

Taking the 33 off the road for a while until I sort out a new clutch and attend to my noisy box

started pulling the box out of the car this morning, not as heavy as I thought it would be, much easier to remove than the RB20 gearbox

http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1655.jpg

best gear in the box
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1656.jpg

notice the lines in the gear, may be where my noise is coming from, also the counter shaft gear that the input shaft runs off has scores you can feel with your nails as you glide them over the top.

All the bearings in the box are really nice, box didnt have any roll over noise like most skylines do. Not sure if this box is going to be rebuildable as majority of the gears have score marks in the teeth. Going to take the box into work next week and see what the guys in there think
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1659.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_1657.jpg

it will make a harsh vibration in any gear if given light load, thinking its going to need a counter shaft and input shaft...

[mitchy]

How was it easier to remove than a 20 box?
It's the same, just bigger and heavier...

[kurbn]

Intake isnt as bulky, not as many hoses in the way to remove the starter motor, tailshaft is in two peices rather than one and so you dont have to drop down the support bracket for the shaft, the bracket for the breather is taller which makes it far easier guide a socket on that bolt at the top of the bellhousing. I expected the box to be a lot heavier, its not much heavier than a 20 box really. Just felt more roomy to move around than the 20

[jaybee]

im sure you of all people would be aware that a brand new rb25det box is $3,200, before your discount too.

[XF Falcon]

looks a billion times better lowered :)

[kurbn]

im sure you of all people would be aware that a brand new rb25det box is $3,200, before your discount too.

exactly!. Il take it to work next week and show the guys in the workshop, Ive only ever rebuilt one gearbox in my life and had a few examples shown to me over time of what noisy gears look like but im no expert so i will get a second opinion before I scrap the box, some of the gears look ok and its very clean inside the box, no gunky or old oil buildup so Im suprised it has suffered any gear wear seeing the bearings feel so nice, however there are a couple of spots where it looks like case hardening is gone on the input shaft gear.. Il just have to get someone who knows what they're looking at haha

[jaybee]

sounds like a good plan. perhaps it's had its bearings replaced during the course of its life, and the reason for the rebuild was due to bad oil being used which could have caused material wear and fatigue.

[Justooon]

Spotted on ROTA website:

http://i52.tinypic.com/2py86dv.jpg

[Douche Bag]

lol nice!
car looks soooooooo clean.. cant get over it.

maybe its cause ive never washed my car since owning it..

[patty]

LOL how did ROTA get that pic

[kurbn]

haha! wondering where he used it. I had been chatting to Wei from Vision R about what wheels to go for and he mentioned nobody has ever given him pictures of these fitted up to a 33, so concidering he gave such fantastic service I sent pictures to him with great thanks of providing me the perfect fitment and great service and just told him that he could do what he wanted with the pictures, so he has something to show his customers..

I will have to send him some new ones of the car lowered me thinks :D

[magic1]

lol nice!
car looks soooooooo clean.. cant get over it.

maybe its cause ive never washed my car since owning it..

shut up dick head, this thread is not about you

[31-EVO]

Lol true to avatar.
Anything with the gear box yet gender bender ?

[kurbn]

Hopefully will know today, pressing the bearings off today

[R31 POWER]

How did the gearbox build go?

[kurbn]

about a month ago now I stripped it down as far as I could with the tools available at work. I then had to send it to a gearbox place to get it stripped down further to find the following.

Input shaft is fucked
3rd gear is fucked
Syncro hub assy was also fucked.

My cost for parts alone was 900 bucks ex japan (dealer cost) + a bearing kit which was a further 400 + the laybor to smash it back together. This was going to blow the box price out of the water and the other syncro's were a bit suss too.

So I ended up shopping around for a box, prices I found from 1250 at KYP or 1500-1600 from JPC or JTW. Found a box of all places today at Tony's auto wreckers for a stupidly cheap price of $990 with 3 month warranty.

So getting that delivered tomorrow, things have been going slow for my couple of builds, far too many bills and expenses been hitting me, so might have to wait until tax time to get my compressor so I can keep moving on with the silvia

Other issue with the 33 is that the rotors are warped to shit so going to look at replacing these too.

[markdett]

about a month ago now I stripped it down as far as I could with the tools available at work. I then had to send it to a gearbox place to get it stripped down further to find the following.

Input shaft is fucked
3rd gear is fucked
Syncro hub assy was also fucked.

My cost for parts alone was 900 bucks ex japan (dealer cost) + a bearing kit which was a further 400 + the laybor to smash it back together. This was going to blow the box price out of the water and the other syncro's were a bit suss too.

So I ended up shopping around for a box, prices I found from 1250 at KYP or 1500-1600 from JPC or JTW. Found a box of all places today at Tony's auto wreckers for a stupidly cheap price of $990 with 3 month warranty.

So getting that delivered tomorrow, things have been going slow for my couple of builds, far too many bills and expenses been hitting me, so might have to wait until tax time to get my compressor so I can keep moving on with the silvia

Other issue with the 33 is that the rotors are warped to shit so going to look at replacing these too.

Your laughing with the box. You got dog leg/cross drilled rotors? Just bring your car into work and get them skimmed. Will save you a fuck load of money. Just gotta make sure there not under

[kurbn]

they're just standard shitty 33 rotors, slotted rotors are pretty cheap anyway :)

[Kerelm]

Looks good, wheel colour suits the white real well!

glad to see more non horrible 33's around

[kurbn]

cheers :)

Car is now driving around, has a little bit of a noise under load still but not as bad as before. Still kinda sounds a bit like centre bearing noise, Might have to look into the noise a bit later on.

a + side, syncro's are FAR better than my last box and doesnt crunch going into third. Even reverse is perfect! Just need to pull the clutch master cyl out and adjust the rod so I can get more travel, there is a small amount of play there I can take up.

Power seems to be a bit flat atm, it will accelerate, seems to level out the power and then once the vvt kicks in it will go again. Power just feels like its leaning off sometimes.. strange. Doesnt do it all the time. Running stock boost too. May have to throw out that shitty stock ECU and put something decent in.

[Milhouse]

stock ecu will cry after exhaust/filter is installed.

winds timing out until 5800rpm then it will come on song.

[_oz]

i had a r33 s1.5 couple years back with a catback, air filter, running 12psi with the stock ecu and it ran perfectly fine? they R&R at 14psi and above dont they?

it didnt have an fmic though, pretty sure thats where the stock ecu starts to get lazy

[kurbn]

http://i752.photobucket.com/albums/xx164/bangnrb25/90dbd040.jpg

New titanium knob from vision r, feels so nice.

[Slip_]

Real clean, respect man your cars tend to be pretty well attended too.

[kurbn]

Pics from Rising Sunday
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/281398_10150230640047237_532717236_7648863_3403083 _n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/271125_10150230640182237_532717236_7648867_8152189 _n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/269537_10150230640297237_532717236_7648872_1632656 _n.jpg

Received these today
http://i752.photobucket.com/albums/xx164/bangnrb25/b9c6762e.jpg

http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_2186.jpg

Needs some purpo or gold wheel nuts. I want to put some tyres on it next. 275's on the rear and 255's on the front would be nice. I love grip

[S133LTR]

Not a fan of the GTR wings but as a whole the car looks good imo..
Whats happening with the s13?

[thrtytwo]

he's waiting on buying a compressor last I heard ?

[duste]

Side-repeaters are a huge improvement, very nice.

[TJ]

Your dedication to shit Nissans is commendable

[Buckets]

I don't know how manage two very decent projects at the same time. Very nice job you've done there.

[Skitzo]

LOL TeeJizzle.

White 33 with GTR wing. Nice!

Don't get purpo wheel nuts. Shit's Gay!

[kurbn]

after waiting and waiting and waiting I finally managed to get some purpo wheel nuts fitted up. Going to buy a special hex socket for them tomorrow so they dont get scratched/chewed up. Nylon lined if I can.

http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_2214.jpg
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_2220.jpg

excuse the dirtyness, needs a wash after the weekends weather.

[31-EVO]

I hate spacers, but it needs them son

[patty]

I hate spacers, but it needs them son
I agree 100% or he could get rims with better offset :P

[markdett]

Purpo's looking the goods son!

[Daisy]

have you been on a track day or is the blue triangle just to let people know you`ve relocated the battery?

[Slow RB25]

Just showing them where it is from factory....

[kurbn]

33s are factory located in the boot. I'm going to do some track days in it so hense the front and rear tow and battery sticker

[Cake]

have you been on a track day or is the blue triangle just to let people know you`ve relocated the battery?
Because race car.

[mitchy]

have you been on a track day or is the blue triangle just to let people know you`ve relocated the battery?

it's so they know where it is when he puts it on it's lid over a power pole.

[R31 POWER]

Looking nice man. I think it needs a small lip to finish up the front and i just happen to have something :p
Looks like this, on a mazda mps thing.
http://i745.photobucket.com/albums/xx99/toddy22587/MPS/P5070148.jpg
http://i745.photobucket.com/albums/xx99/toddy22587/MPS/P5070149.jpg

I just finished doing it to my S2 33 and it looks good! Pm me if keen.

[kurbn]

haha funny you mention, last night I ordered some hard rubber garage seal :)

[R31 POWER]

Dam :p If you change your mind let me know. Im left with enough to do a 33 cheap.

[stormtrooper]

shut up dick head, this thread is not about you

I laughed soooooooo fucking hard.

33 is looking good dude, gotta say the Rota's aren't actually bad on that thing hey! Vast improvement on the 32 ;) Now hurry the fuck up and finish the 13! :)

[kurbn]

found this
http://i752.photobucket.com/albums/xx164/bangnrb25/IMG_2801.jpg

think im going to need to do something with my offset to make it look good, like the car it came off.

got a decent hookup on painting the front bar, I just need to make some minor repairs to it first.

[grogers]

looks sweet! setting the car up for any particular track event! or just all rounder?

[John Butler]

Mark's? Looks better on yours imo due to having side skirts and pods.

[patty]

Mark's? Looks better on yours imo due to having side skirts and pods.
yeah marks. I agree looks nice with skirts and pods

[Buckets]

Now hurry the fuck up and finish the 13! :)

33 is good enough now. Back to the main game, :p

[kurbn]

agreed, cosmetically its going to finish off the car. I would like led tail lights later on tho, not in any real hurry however.

once i get this new job im going to set it up for time attack nights