rx7 13b turbo pics

[jesse-92]

incompleate yet but getting there

http://i53.tinypic.com/9b9p3q.jpg
http://i51.tinypic.com/xe06sk.jpg
http://i55.tinypic.com/16jegqw.jpg

[jesse-92]

http://i56.tinypic.com/2j2cfwx.jpg

[Brett_J]

More info on car, mods and such.
And whatever info about yourself too, pics, stats and the likes.........
If you're a girl that is...

[jesse-92]

i just bort it a week ago it has high flowed turbo
microtech mtx8
lsd
big front mount
3 core alloy radiater
50mm waist gate
3 inch exhaust
thats as much as i know about it now will get my head around it soon

[jesse-92]

oh yeahh big alloy oil cooler dont know the brands of anything thats on it i think the guy before me just bought ebay shit

[DJ84WA]

Do you know if the car is registered with the 13bt?
What are your future plan's?

[jesse-92]

i dont think it is rego'd with the 13bt
im planing to eventually get 500hp+ out of it and maybe keep on going

[Tones]

who's doing the work on it?

[jesse-92]

i am doing as much as i can myself and then im taking it to rotamotion

[JBAE]

i miss my s2 3bt sooo fcuking much :(
take it elsewhere to Sanders racing or LF, 500+ is a big call and in a s2 id be aiming around 350-400 max thing will of its titts with that sort of power figure prols low 11/ high 10s capable if you can drive and its set up ok, and still not hugely strung out at those figures..

[Yakky Bear]

take it elsewhere to Sanders racing .

rotos tuned sanders cars from memory well they used too.

[1JZVL]

Looks pretty tidy, and would go pretty quick as well!

Thing is....were you born in 1992?

[jesse-92]

I thought rotamotion is good with working on rotors arent they like the best place to take them

[JBAE]

correct! but he builds the motors and i think terry stacey does the ports plus gives rotos enough bussiness theyd want to look after him and do shit right... ive had my old rotors tuned there and were shithouse undrivable and personally will never use them ever again unless its through sanders...

[shifted]

Hearing good stuff about Sanders from heaps of places. +1.

Nice colour, haven't seen a yellow one before.

[jesse-92]

All i need done to it to finnish it is to be all wired up fuel system all conected and tuned to make big hp who would be the best to do all of that

[JBAE]

if its just a high flow you wont be making BIG HP prols somewhere in the field of 2-300rwhp mark but yeh id take it to sanders to look at man hes down kelmscott

[Tones]

Good choice on shop. Can't go wrong with Sanders either.


i miss my s2 3bt sooo fcuking much :(
take it elsewhere to Sanders racing or LF, 500+ is a big call and in a s2 id be aiming around 350-400 max thing will of its titts with that sort of power figure prols low 11/ high 10s capable if you can drive and its set up ok, and still not hugely strung out at those figures..

There have been 11 second gen 1 rx7 rotors back in the day with only 270ish hp and 13" slicks.

[jesse-92]

Awsum cheerz man

[JBAE]

^ there you go fcuk all power is needed! those stats are impressive though knew mid lowish 12s with mid 200 rwhp was common but 11s fak thats a a decent effort!

[Tones]

think it was an 11.50 or around that mark at 118mph.

[ClevoCapri]

Hey mate nice rotor. Can you move the pod filter away from the back of the radiator at all. Looks like it will be fed hot air straight out of cooling fans. And thats not good for anything!
Good luck with the build. Dont bang it into a tree when its done!

[1cut808]

LF won't touch that thing.... Not their cup of tea...

And good luck getting anywhere near Lee at the moment... Have to make an appointment at Hakea unfortunately....

[jesse-92]

awsum ill take it there then i was gonna take it to sik em wrex racing in mandurah coz i live down there he is awsum ayy but i cant afford his prices at the moment

[jesse-92]

and thanx mate yeahh ill move the pod filter near the light so i can take the light out when im at the drags and no i realy dont want to wrap it round a tree that would be devo all my mates are into drifting and they have tought me heaps of shit so i think ill be right haha

[1cut808]

awsum ill take it there then i was gonna take it to sik em wrex racing in mandurah coz i live down there he is awsum ayy but i cant afford his prices at the moment

Hmmm OK... You think Roto's is going to be cheap?

[jesse-92]

yeahh cheaper than anything else i reckon ayy i also have a vl turbo ive spent $15000 on it and it only does low 13's

[JBAE]

tim at sik em is good he sorted out my s2 and my fc but if you think he is exxy the others are going to be the same or more, dont worry about pulling lights n shit out its not a drag car ect just move the pod as far away as possible and sensible from hot air..

AND FFS please dont try drift it 1st gens are snappy as and dont have the balance it will end in tears!

and never get too confident with your abilities to drive with basic mods in this car you will have a decently quick car that will bite you in the ass in a heart beat...

[jesse-92]

yeahh tim at sik em wrex is awsum ayy i recon one of the best never had a problem with him

[jesse-92]

and yeahh i thought they wouldent be a good car to drift any way

[Tones]

LF won't touch that thing.... Not their cup of tea...

And good luck getting anywhere near Lee at the moment... Have to make an appointment at Hakea unfortunately....

not any more

[1cut808]

AND FFS please dont try drift it 1st gens are snappy as and dont have the balance it will end in tears!

and never get too confident with your abilities to drive with basic mods in this car you will have a decently quick car that will bite you in the ass in a heart beat...

And please make sure the FARKIN wheel bolts are tight!! Wheels like falling off these especially when they have lockers!~

[jesse-92]

i dont think i'll be putting a locker on it any time soon lsd is good enough

[1cut808]

not any more

Ahh good news.... That was quick... Bet it didn't feel like it though :(

[26gtst]

thats some pretty clean work. do u know who built the engine?

[jesse-92]

nahh i have no idea

[caibs]

nice rotor mate. my old boss had one with 400rwhp that ran a high 10 on the bottle. put up pics of your vl

[jesse-92]

I wish i could put some pics up of it but it is a bare shell at the moment

[jesse-92]

Good news hopfully in two weeks ill have this beast up and running cant wait to drive it ill see you all at the cruises soon :)

[Buckets]

Be nice to it while its running in or it will go bang.

[_oz]

man that turbo is tiny! or am i missing something?

[BIGS]

Think it's just the angle and distance of the shot. Cause even the pipe off the back looks drinking straw in that shot.

[Tones]

Hi flowed series 4 turbo

[_oz]

cute baby turbo! whens the to4z going on :) or should i say when is the engine going onto the to4z? lol

[Tones]

meh to4z is still small for a rotor. gt42 is getting very average. GT47 is where its at for street rotors now!!

[jesse-92]

Yeahh soon ill put a new turbo on it when i do the extend ports but i cant realy see changing this turbo my mate has the same turbo and ran a 9.5 at motorplex and the intercooler piping is 2.5 inch from turbo and 3 inch to intake

[_oz]

do you know what the car weighs with/without you sitting in it? must be light as!

[jesse-92]

I wouldent have a clue ayy ive read up about it and there around 1000 - 1150kgs

[Tones]

What car is your mates? Not to many rotors in Perth have run a 9

[jesse-92]

Its a blue series 1 with a scoop with the back gards flared hes selling the shell now

[Tones]

Is it this one
http://img440.imageshack.us/img440/3349/sdc14754.jpg

[jesse-92]

Yeah thats the one

[Tones]

oh. um, when did it run that number? as the quickest hiflo time i've heard of is booga's purple rx3 coupe and that was a 10. a 9 on a hiflo is fucking impressive as most we've ever made with one is just over 300hp atw... need around 500+ to run a 9

[jesse-92]

Yeahh i think e was running 450hp and yeahh ill tlk to him about it ayy he had the high flow on when i came over the other day and he was telljng storys bout is so i presume he had the high flow on when running that time

[Tones]

ah k yeah. if he's managed to squeeze that much out of a hiflo then its impressive.
not trying to shit stir just yeah, never heard of a series 1 with a hiflo running 9's, or for that matter with any turbo running 9's except for the pale yellow one but thats a full race car

[jesse-92]

Awwww ok yeahh im not positive On the details of what he was running but yeahh

[BIGS]

I can only imagine it was running straight meth to make that kind of power on a hiflow :confused:

Turbos so cheap might as well upgrade while you at it :)

[jesse-92]

Any one got any to4z's for sale then haha

[Tones]

Yep. Have 1 to4z and 2 gt42 in my bedroom

[jesse-92]

Aww kool r u selling them if so how much for t04z and how much for gt42

[Tones]

Sending pm

[jesse-92]

Awsum bro

[jesse-92]

Spent $450 the other day getting turbosmart fuel reg boost controller and gauge and $650 today on 1000cc rochi injectors hopefully running this week :)

[_oz]

mtq have to4z on special for 1540

0.7 rear housing only though

[jesse-92]

Aww kool but i might just stick with the high flow for a bit till i get used to it

[DBLDOSE]

Hmmm OK... You think Roto's is going to be cheap?

Don't know about their roto work, but took my VL there to get some shit done, told me they would need a week, got it 2 months later... And was fairly expensive for what was done.

[jesse-92]

Great news got the car up and running today just need to get dyno tune now found out more about it mods are.
Extend ports
Front mount
Big oil cooler
Lightened fly wheel
3 inch exhaust with magna flow mufflers
Bosch 044 fuel pump
Race surge tank
Rochester 1000cc injecters x4
Turbosmart 800hp fuel reg
Turbosmart bov
2 core ally rad
Battery in boot
Microtech mtx8
High flow turbo
And thats about all. Hopefully ill bring it on a cruise next week :) see you there.

[AntonRX]

looks good. Like many people have said i doubt you would be getting that sort of power with highflow. I had a big garret on mine and was making 460rwhp. Have no downgraded engines and turbo to extend port and standard atm but if you think of selling your hiflow down the track let me know. 300-350hp is more than enough in a gen1 rx7, 460 in mine was useless.

[jesse-92]

Yeahhh i asked him and he sed he used a gt42 or something i cant remember but ill bring it on a cruise next week :)

[TJ]

Free bump

[mr_mike]

any updates bro?

[Turbo2.6L]

Chopped any unreliable shitter falcons lately?

[jesse-92]

Never been chopped by anyone yet

[-Luke-]

Rota broken down again?

[jesse-92]

When did i say that LEARN TO READ

[mys1]

Chopped any unreliable shitter falcons lately?


Never been chopped by anyone yet

You guys should race for slips! we can close off a road with trucks and bikini clad girls!

[jesse-92]

Haha y would i want to race for slips i dont wanna embaress myself for having a shit falcon in my driveway

[duste]

This guy, lol.

[Buckets]

Haha y would i wabt to race for slips i dont wanna embaress myself for having a shit falcon in my driveway

Umm lets think about this for a second... Even as rotor fan boy I still think His car > Your car champ. Don't go slagging off other people (quite good) rides as inferior unless you have the car to back it up. I'm sure you SA22 is quite nice but it's not quite there yet.

[Mad_Aussie]

Haha y would i want to race for slips i dont wanna embaress myself for having a shit falcon in my driveway

I'd race you for slips, but I don't think I'd be able to fit my pushbike in the boot of an rx7 for the drive home afterwards.

[jesse-92]

Whatever im over it ay

[-Luke-]

When did i say that LEARN TO READ

Oh thats rich, U bein teh mstr ov teh Englsh Langwidge an all ay?

U ovr it bra?

[jesse-92]

Fuck off

[-Luke-]

Fuck off

http://i265.photobucket.com/albums/ii201/lukehidderley/TrollFace.png

[yeahlow34]

Fuck off

Make me.

[Gleeso]

Oh thats rich, U bein teh mstr ov teh Englsh Langwidge an all ay?

U ovr it bra?

LOL

This thread needs to be closed already.

[TheChad]

exactly. so possibly a new thread could be made on the subject.

[Mad_Aussie]

exactly. so possibly a new thread could be made on the subject.

LOL

[duste]

Oh thats rich, U bein teh mstr ov teh Englsh Langwidge an all ay?

U ovr it bra?

Just a little bit hypocritical, don't you think? You're hardly a master of the English language yourself.

[esky]

Its a blue series 1 with a scoop with the back gards flared hes selling the shell now

There's no way that blue thing has run 9's.

i've seen it get chopped by cars that run 11's.

[jesse-92]

There's no way that blue thing has run 9's.

i've seen it get chopped by cars that run 11's.

I've seen the papers mate.

[SEXUAL TYRANNOSAURUS]

http://i.imgur.com/KXp2P.jpg

[-Luke-]

I've seen the papers mate.

West Australian?, Sunday Times? :confused:

What the fuck has printed media got to do with Trolling silly threads?

http://i265.photobucket.com/albums/ii201/lukehidderley/4Kfqy.gif

[Joe]

This thread makes no sense.. so here's a blue waffle for y'all.

http://www.robontradio.com/wp-content/uploads/2011/01/blue-waffle.jpg