Katayori - R33 Sedan

[Milhouse]

Figured i should make up a quick showcase for my current daily/bunky 33 :)

Its a 93 S1 Manual Sedan, which came to me in a bit of a banged up state so over the past 18 months ive slowly been fixing it up.

http://sphotos.ak.fbcdn.net/photos-ak-sf2p/v649/49/115/665691579/n665691579_2539702_5387759.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs107.snc1/5064_96946116579_665691579_2539696_6707774_n.jpg

The old bumper + cracked grill + dented bonnet made way for replacement parts from MrMayhem, and also included a Type M front bar.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs087.snc1/5064_96946346579_665691579_2539700_2736455_n.jpg

I swapped all the front end over, and a few weeks later had it tinted. After seeing a mates S14 with 18x10 wheels all round on it, got me keen on the idea of wide offset on a jap car. So the hunt begun for some nice wheels to fit under the arches.

Ended up buying a set of Volk TE Progressives from Ash, 19x8.5/9.5 stagger with +25/22 offsets.

The car easily swallowed up 275's in the rear with rolled arches but the lack of concave all round was starting to annoy me

Polished up
http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs272.snc1/9931_161585666579_665691579_3347660_3148129_n.jpg

So i trawled the internet for several weeks trying to find a pair of wheels to replace the fronts with and came up with a complete set of 19x9.5 +12's :D

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs272.ash1/19960_306108386579_665691579_4073739_6677387_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs192.snc3/19960_306262926579_665691579_4074342_6692066_n.jpg

Few weeks later i had the rims sent to Aaron for some 225/35/19's stretched onto them

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs390.snc3/23787_328923081579_665691579_4149705_1780840_n.jpg

And this is how it now looked with a bit of a clean

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs465.snc3/25524_376935086579_665691579_4373079_2532853_n.jpg

The old REO bar had a slight bend in it which had been bugging me, the bumper wouldnt sit neat under the headlights so another undamaged REO bar was purchased, and a spare standard bumper thrown in so that was put onto the car due to it actually having paint.

The wheels were then removed and 5mm spacers were fitted all round taking them to +7 and got some photos of the car taken.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs139.ash2/40303_413819581579_665691579_5371218_1441092_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs105.ash2/38613_413819631579_665691579_5371220_8192326_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs225.snc4/38613_413819636579_665691579_5371221_1286556_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs278.snc4/40253_414156526579_665691579_5379703_195036_n.jpg

Stance
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs320.snc4/41318_418958311579_665691579_5508239_5804554_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs436.snc4/47918_418958341579_665691579_5508240_6806833_n.jpg

Still not happy with the front end i went in search of a wrecked 33 GTR, but after realising the small fortune it would cost to get the parts together i settled on a S2 Coupe Front end which was sourced thru MrMayhem. The FMIC was also removed, it will be replaced with a proper Jap setup once money is available.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs004.snc4/33581_434578836579_665691579_5849449_7121632_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs465.ash2/73862_441888736579_665691579_5969064_934270_n.jpg

Corbin wanted to get a few photos of the car aswell...

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1214.snc4/156677_153332304712749_100001079416203_255856_5972 907_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs606.ash2/155885_152899518089361_100001079416203_254491_7170 542_n.jpg

Hellaflush !

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1125.snc4/148697_448322071579_665691579_6075510_8299406_n.jp g

And thats basically how the car looks atm.

Mods -

Tein Flex Coilovers 12kg/12kg springs
Tomei 3 Point Front Strut Brace
X-Force 4" mild steel exhaust from turbo back
Kazama Gearknob
Navan Rear Wing

Ive ordered replacement gearknob/handbrake/arm rest covers in black leather with red stitching and a few more bits n pieces which should arrive over the next month so i'll update the thread then

Plans for it are to get the suspension/brakes finished. S2 sedan taillights, m-sports skirts and rear bar, new exhaust system,ganador mirrors and light engine mods until the power bug bites

[Lonewolf]

liftkit

[Tocchi]

2 thumbs up from me Owain, your car, despite it's tri-tone front end, impresses me :)

[OLSKOOL1800]

Fucking ricers...
Next you will be telling us you think FWD cars are tough... Jebus.
Dude, how hard is it to get the front bar painted?
Looks good...

[Skitzo]

I fucking <3 the colour of this shitter.

[DESAM8+PANIK]

The only dirty3 I would be proud to ride in ..... Tough stance brother :) now just finish off with no china and it will be all good

[Milhouse]

Waiting til i get the rest of the bodykit before i send it off for paint jords, wont be too far away

Cheers clint, its slowly being de-china'd, the last bit is the exhaust haha.

[Jiblet]

Very nice, but aren't you sick of the re-work? bit of wasted money in different bars etc..

[rat]

Very nice looking 33, i love the 4dr rear end.
Were you in Rockingham yesterday afternoon?

[DISTRBD]

You leave the writing on the bonnet ?




I fucking <3 the colour's of this shitter.

Fixed

[Milhouse]

Yeah rat that was me

Jiblet, not really. The S2 front end will stay on the car now

Yeah bart, the writing is still on the bonnet haha. Too lazy to wipe it off.

[Halle Terry]

I honestly love it as multi coloured, it's so dope!

[Kerelm]

<3 the poke!

[Marti]

i love this car, so tidy

[Ben Wha]

Looks shit, 4 door skylines are balls.

Jus' playin', looks dope mang :D

[Scaf]

Thats hard, much love for the 4 doors.

[Milhouse]

Thanks for the comments guys, its far from finished but i figured a bit of a build thread would be good.

Bits and pieces are on the way from japan at present, so i'll update it when they arrive :)

[Halle Terry]

Sways + 2-way?

[TJ]

2 ways for daily street use are homo and you know it.

Looks mint Owain, I remember seeing this just after you got it when I came past in the dakker.. its come along way!

[Milhouse]

1.5 + Cusco Sways Terry :)

Would like to get the front end a bit lower, but the coilover is wound fully into the foot, spring is floating with the locking rings 5mm from the bottom. Need to remove one of the lock rings to get anymore drop out of the front.

Rear is limited at present, not keen to mash lip of rim against the arches...

[rat]

Yeah rat that was me


Looked nice! We had a good look/ chat about it when you drove past the kebab shop about 3 times lol

[Halle Terry]

1.5 + Cusco Sways Terry :)

Would like to get the front end a bit lower, but the coilover is wound fully into the foot, spring is floating with the locking rings 5mm from the bottom. Need to remove one of the lock rings to get anymore drop out of the front.

Rear is limited at present, not keen to mash lip of rim against the arches...

<3

What are your actual plans for it? Just a daily? Track it? Dori?

[R3N]

Nice chromies!

[Torquen]

Wheels are too big IMO, 18's would have looked better.

[Tocchi]

Nice TE's ... ahh i mean Rota's judging by the warping in this photo ;) xoxox

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1153.snc4/149545_1334661585805_1809041724_662387_825880_n.jp g

[RICEY]

Rims look sik

[Splat_man]

Looks awesome man!

Love the pic of the business car sitting in the guards. :)

[Milhouse]

Mods are coming slowly for it, managed to get some nice italian leather boot surrounds for the handbrake, gearstick and arm rest. The arm rest needs to be glued on so i'll give that to a trimming shop to sort out.

Rob @ Volatile Customs did an awesome job wiring in a new push button imobiliser w/ central locking, cd player, defi gauges & turbo timer and manged to clean up the spiders web of wiring behind the dash.

I also ordered S2 Sedan taillights + garnish from a jap wrecker in the eastern states, the lights fitted perfectly but the garnish doesnt fit due to the bootlock. Still deciding whether to remove the lock and have the garnish smoothed over, or try get a S2 boot lock.

Back in late december/early January i started to email Jesse Streeter in japan with the hopes of getting a "dart izzumi" style exhaust for the car, the one i found appeared to be "china" so he sent off a few emails for me to see what was available. Dart Izzumi no longer exists and the only other option was a Reinhard system.

Placed an order beginning of jan for a semi-titanium cat back system with no muffler and am very happy with the final product. Will fit the exhaust on the weekend and see how it looks.

Photos.

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/180754_490930261579_665691579_6718731_338747_n.jpg

[masTers]

Needs RB26

I was looking at a similar style exhaust for the DR30 through Jesse as well, it appears now that China is infected it's way through Yahoo now and is becoming eBay v2 :(

[31-EVO]

Hells yes, that will look and sound awesome.

[Tocchi]

is that 3" into twin 3" ?

[Milhouse]

Yeah thats the problem, i was looking on yahoo japan, sent him the link he looked at it and told me it was an "unknown brand" and by the photos it didnt look very "jap" in quality.

This one is titanium from the 1-2 split to the end of the tips. 90mm system (3") to twin 3" to 4"? Tips

[joshg123]

Ahhh this has made some very good progress since my old mate sold it to you, however there is a severe lack of gate noise when driving, and there appears to be a absence of highmount? Whats happening?

[1JZNOSHIT]

those pipes are going to be fucking rowdy!

love what you have done so far mate. stance is staunch!

[Milhouse]

Panel & Paint, Finish Suspension & Brakes, Buy 2 x Bride Low-Max's for the front + Nardi Wheel

Then i'll no doubt go hi-mount, injectors, ecu, pump, fuel reg, greddy inlet, and lumpy as fuck cams.

Should be finished for powercruise

[Skitzo]

4 Door, fitment, twin pipes.........Nemesis!

[mitchy]

Owain's R33 > Your Chaser :p

[SimonR32]

Panel & Paint, Finish Suspension & Brakes, Buy 2 x Bride Low-Max's for the front + Nardi Wheel

Then i'll no doubt go hi-mount, injectors, ecu, pump, fuel reg, greddy inlet, and lumpy as fuck cams.

Should be finished for powercruise

NICE!

[magic1]

Panel & Paint, Finish Suspension & Brakes, Buy 2 x Bride Low-Max's for the front + Nardi Wheel

Then i'll no doubt go hi-mount, injectors, ecu, pump, fuel reg, greddy inlet, and lumpy as fuck cams.

Then i will HARD PARK IT NEXT TO THE LASER

oh really

[adrenalin]

Looks sweet owain

[AGIT8D]

Great now I want semi titanium exhaust, thanks guy!

You forgot clutch, diff in your little powercruise scenario.. Will this buck the trend and stick with U98 being a daily warrior?

[d1mitch]

never been a huge fan of the 33's in two door or 4 door, but this one looks awesome.
i want some reinhard dual pipes now though

[Skitzo]

Owain's R33 > Your Chaser :p

You can have an opinion when you have driven your own 4 door import everyday for 8 months.

[mitchy]

You can have an opinion when you have driven your own 4 door import everyday for 8 months.

lol, i just wanted chaser rage. :(
i did drive it some days for 6 months though. :p

[Skitzo]

I raged behind my desk, but feel i need to not pay attention to it, so it passes by.

[RH8 GTR]

Looks mint man, shes becoming a very tidy and tastefully modded 4 door!!

[Milhouse]

Great now I want semi titanium exhaust, thanks guy!

You forgot clutch, diff in your little powercruise scenario.. Will this buck the trend and stick with U98 being a daily warrior?

got os-triple plate for JDM rattle :) just havent fitted it.

It does need a 2way tho, the standard viscous diff is pretty shot.

Nah the 33 wont be pingpingpingpingpingpingpingpinged, should be pretty reliable once its done so it will remain the weekend warrior.

[RELEASE]

some solid mods! nice work

[patty]

Man that exhaust looks sick. Can I ask how to get in touch with this Jesse Streeter dude??

[viet_boi]

that exhaust makes me hard in my pants! can not wait to hear it! will it be getting battle scars from the speed bump monster with your ride height? or it should sit pretty high up?

[mitchy]

got os-triple plate for JDM rattle :) just havent fitted it.

It does need a 2way tho, the standard viscous diff is pretty shot.

Nah the 33 wont be pingpingpingpingpingpingpingpinged, should be pretty reliable once its done so it will remain the weekend warrior.

does it really need a triple just yet?
a single plate will be much nicer and handle the power as is...

[Milhouse]

I'll fit the exhaust tomorrow and get the video camera out to record some footage.

[AGIT8D]

I'll fit the exhaust tomorrow and get the video camera out to record some footage.

Make sure you don't start on it too early in the morning, mozzies galore. Also, I might be free to lend a hand (watch you squirm under the triple toner).

[masTers]

Pics with exhaust?

[Alt_F4]

Keen for sounds clips :p

[Milhouse]

Fitted the exhaust on saturday, it doesnt quite fit properly (due to it being for a 2 door) and sadly its melted the exhaust recess in the bumper haha. Josh from metalcraft is modifying it to fit better, so once thats done i'll get some photos. The noise is pretty loud to say the least, at 100kmh it doesnt drone so im happy with it.

I didnt realise the exhaust comes with 2 sets of silencers, the funnel type which sits at the end and a removable muffler with fibre matting wrapped around it which can also be removed.

The car has also been quoted for panel and paint, getting the windscreen forward redone, rear bumper and rear taillights/garnish.

Will be happy to have it looking the correct colours for the first time.

[Jumanji]

I acctually really like this Skyline, nice work mate :)

[Milhouse]

Cheers, it'll get there slowly :)

[Milhouse]

Bit of a small update on the car.

Had a quick google search a few months ago and managed to find some series 2 taillights + garnish in the eastern states. Got it over only to find the centre garnish boot lock didnt fit :(

Got the reinhards fitted onto the car, only to find that they too didnt fit and caused a slight "melting" of the rear bumper. So they were removed, and the existing 4" x-force system fitted back on.

Was starting to get sick of the car looking "shit" and having the assortment of multicoloured panels so i organised a quote and had the car sent off for panel and paint.

Had the passenger fender replaced *due to previous 19's tearing the guard to pieces*, rear lights + garnish painted / front end from windscreen forward / rear bumper / deep badly repaired scratch in rear drivers 1/4 fixed and painted up.

Removed the 5mm slip on spacers for the time being, and sent the exhaust off to Josh @ Metalcraft Marine to have a 10cm section added to it to clear the bumper. I havent got any decent photos of the exhaust on the car yet, but heres a few before / after shots of the car.

More updates are planned, just need to start saving again !

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash1/179006_489443086579_665691579_6696546_2406818_n.jp g

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash1/180084_489443206579_665691579_6696550_2710289_n.jp g

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/180386_489443251579_665691579_6696553_8240669_n.jp g

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/167165_489443351579_665691579_6696556_3652181_n.jp g

And heres some photos of the car in its current state

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/198220_189280377776630_175269075844427_393343_4099 601_n.jpg

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/199863_10150122067138987_513023986_6418887_8358225 _n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/183534_1857454126154_1534906561_2000231_7411200_n. jpg


Wanted to do some "sticker bombing" on the car before it got painted, but that never eventuated so Gav @ GT Graphics and myself decided to spruce up the engine bay with a few bits wrapped up. The airbox surround / plug covers are a "sticker bomb" image on a single piece of vinyl.

Appologies for the dodgy iphone photos and dusty engine bay.

Southwest Brakes Air Filter Surround Box - Cheers Bart !

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/184652_10150190596743696_670158695_8731027_8089710 _n.jpg

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/196626_10150103649866580_665691579_6966932_1296225 _n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/200520_10150103650326580_665691579_6966951_6458691 _n.jpg

The worlds only "FUUUUUUUUUUSE BOX" :D

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/197123_10150098958711580_665691579_6927813_6248102 _n.jpg

[Gleeso]

Love the sticker setup you got, especially the "FFFFFFFFFFUUUUUUUUUUUUUUU Box"

Did you put clear contact over it, so the heat doesn't wreck it?

[Milhouse]

Nah no clear contact, its not cheap vinyl so the heat shouldnt affect it.

[TJ]

Looks mint.

[duste]

Rocker cover needs to be powder-coated/CIC'd black and cam gears cover needs to be cleaned up lol, looks awesome otherwise!

[kurbn]

that fuse box is killer!

[DISTRBD]

Airbox looks great :)

[YOUR MATE]

LOL @ Fuse box cover. nice.

[DESAM8+PANIK]

Millhouse love the wrap ... very JDM and not CDM :)

[AGIT8D]

Son of bish, engine bay needs a detail ASAP!! I love the little mods in there though, very original and will stand out well when the rest of it doesn't look 20 years old. :D

[Milhouse]

Rocker Covers will be painted in the same colour as the car

Cam cover will be carbon fibre

Going to buy a few more carbon bits for underneath the bonnet...

[Mad_Aussie]

<3 the sticker bombed parts, tis on my list too. Did you actually sticker them up, or have it all printed onto one sheet of vinyl?

[Milhouse]

big image printed on a single sheet of vinyl.

[Lancey_B]

Looks wicked man. Good work

[Milhouse]

Progress has been pretty slow, currently saving up to get more things upgraded.

Swapped the standard plates for slimline ones, adjusted the suspension a bit more.

Adz @ OCD Detailing gave up an afternoon of his time today to bring back some shine to the 19yr old paint. Much appreciated ! Fantastic work :D

Here's some photos, they dont really do it justice as it looks amazing in person.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/252931_10150199454331580_665691579_7609717_6755350 _n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/251284_10150199454441580_665691579_7609719_5105860 _n.jpg

[R3N]

wrong plates

[space]

+1, you planning on getting some TE's?

[Risk10k]

Car looks bombed. Much love for 32/33/34 4 doors, feel like offloading the rims anytime soon?

[Jimmy_S]

Debadge Owain!?.. Looks awesome!! :)

[Milhouse]

Yeah will be getting TE's as the next set of wheels.

I kinda like the badges and the wing, so i'll probably end up leaving them on

[mitchsterbrau]

great looking car, love all the cool/small details.
keep it up! :):)

[180SXTCY]

what size and offset te37s u after?

[kurbn]

Much love for this family orientated vehicle

[dtcng]

needs roof racks :)

[luke20t]

Just came across this thread, i like!

[Buckets]

I saw this at Vastese on Saturday morning. It's certainly one of the better R33's getting around. Needs TE 37 <3 ASAP with those plates though.

[Milhouse]

Been ages since an update,

Got sick and tired of battling with the summer heat, so i headed down to Bart's workshop in bunbury and grabbed a s1 condensor / lines and pump from a half cut, fitted them into the car and had Joshg123 check the system and re-gas for me. Thanks to shannon (mullmans) & Chris (sfidz) i was also able to grab a good condition LSD from a rear cradle, which Josh installed as well.

I started putting cash aside last year for another set of wheels to finally match the licence plates, had originally thought about 18x11 TE37SL's which came up at a good price, but the idea of stupidly wide wheels turned me off the idea. Settled on a set of 18x9.5 +12 White TE37's + Blue Rays Duralloy Wheelnuts running 235/40/18 rubber all round.

The brakes were getting tired (pretty sure they were the original rotors) so a trip down to bunbury again to see Bart. Picked up a set of DBA 4000 slotted rotors for the front and rear, during the install i cleaned up the calipers and gave them several coats of high temp gloss black & sanded the nissan logo.

Picked up a Nardi Deep Corn + Works Bell boss kit and fitted that, due to the original wheel starting to tear.

Some of you may know James, who came over from NSW with his multicoloured R32 Sedan. His brother needed an RB25 for his R32 and managed to find a complete car for a good price. The upside for me was the car was a 33 S1 M Spec sedan the exact same colour as mine. James sent me a message straight away explaining the car was to be parted out. Since i am keen on the OEM+ look I wanted the bodykit more than anything, we agreed on a price and he had it removed and shipped over to me. The first thing that needed to be done was removing the 20year old double sided tape, cleaning up the cars panels and fitting. Gives it a much nicer look, and isnt a crappy fibreglass kit that will crack if you look at it the wrong way.

Its taken a while, slowly but surely its being turned from the bunky it was, into a fairly clean street car. Here's a few photos from when i got it.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/5064_96945946579_665691579_2539694_6405552_n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/5064_96946036579_665691579_2539695_7322094_n.jpg

And here is a few photos of the car in its current state thanks to Terry Roberts

http://farm8.staticflickr.com/7206/6907873249_218f6bc582_b.jpg (http://www.flickr.com/photos/terryroberts/6907873249/)
IMG_8214 (http://www.flickr.com/photos/terryroberts/6907873249/) by Terry.Roberts (http://www.flickr.com/people/terryroberts/), on Flickr

http://farm8.staticflickr.com/7046/6907879143_677d22313b_b.jpg (http://www.flickr.com/photos/terryroberts/6907879143/)
IMG_8226 (http://www.flickr.com/photos/terryroberts/6907879143/) by Terry.Roberts (http://www.flickr.com/people/terryroberts/), on Flickr

http://farm8.staticflickr.com/7183/6907890711_dc48e142a7_b.jpg (http://www.flickr.com/photos/terryroberts/6907890711/)
IMG_8259 (http://www.flickr.com/photos/terryroberts/6907890711/) by Terry.Roberts (http://www.flickr.com/people/terryroberts/), on Flickr

http://farm8.staticflickr.com/7045/6907887833_152edf18c8_b.jpg (http://www.flickr.com/photos/terryroberts/6907887833/)
IMG_8253 (http://www.flickr.com/photos/terryroberts/6907887833/) by Terry.Roberts (http://www.flickr.com/people/terryroberts/), on Flickr

http://farm8.staticflickr.com/7055/6907884635_fb4c088d94_b.jpg (http://www.flickr.com/photos/terryroberts/6907884635/)
IMG_8249 (http://www.flickr.com/photos/terryroberts/6907884635/) by Terry.Roberts (http://www.flickr.com/people/terryroberts/), on Flickr

http://farm8.staticflickr.com/7179/6907882093_0488b9476a_b.jpg (http://www.flickr.com/photos/terryroberts/6907882093/)
IMG_8241 (http://www.flickr.com/photos/terryroberts/6907882093/) by Terry.Roberts (http://www.flickr.com/people/terryroberts/), on Flickr

http://farm8.staticflickr.com/7210/6907875673_1d869e5dc1_b.jpg (http://www.flickr.com/photos/terryroberts/6907875673/)
IMG_8223 (http://www.flickr.com/photos/terryroberts/6907875673/) by Terry.Roberts (http://www.flickr.com/people/terryroberts/), on Flickr

[Marti]

car looks awsome

[Fukushima]

you owe me something for that diff :P

car looks bombed man!

[Scaf]

Looks awesome mate!

[1JZVL]

Love a genuine set of TE37's in good offset, looking great......FUCK!!!!!!!!!!!!!!!!!!!!!!!!

:mad:

[Niva]

I hate S2 front ends
I hate 4 door 33's

but this.. this looks fucking awesome.

[Lonewolf]

winning.

[R3N]

looking schmick owain... however give the headlights a good polish!

[TJ]

http://farm8.staticflickr.com/7179/6907882093_0488b9476a_b.jpg

Terry could you shop out that small child from the shot?

I remember seeing this just after you got it. Come a long long way.

[lysdexia]

fuck yeah man that's come up awesome!

[Milhouse]

But then you wouldnt see my shirt with the monopoly guy saying "Broke" :)

Thanks for the comments !

[Tocchi]

needs more china copies and [RO 74 WA] plates

[jaybee]

wow, this car and the 4-door that 1JZNOSHIT just sold has me set in finding one for my new daily i think.

[Kerelm]

I'm ok with it.

[TJ]

needs more china copies and [RO 74 WA] plates

Ill proudly run this sticker

http://ilovemysticker.com/images/pride/chinesepride.jpg

[Kerelm]

He'll buy copies when it curbs them all in a Maccers drive thru on some wild drug fueled cheese burger run in an effort to get 2 slightly over weight black women to have sex with him.

[ossie_21]

I also hate 4-door 33's, but that is fucking nice. Good stuff!

[SimonR32]

Looking mint Owain!

[masTers]

Looks tough. Very tough.

[j3rk]

Nice and clean Owain! I like that you kept the two-tone scheme, also looks much nicer with the added the S2 bumper!

Would make a nice daily.

[Joe]

Those Varrstoens came up nice and clean... excellent work Owain!

[confuzion]

Very sexy dude, loving the 2 tone and bumper!

[masTers]

Boost gauge lets it down :p

[Jimmy_S]

Love-lyyyyyyyy Owain!!

p.s - where are the old wheels? FS2me?

[Sfidz]

Boost gauge lets it down :p

I am already on his case.
Scoping out for a Red defi for him :P

[Milhouse]

Yeah the boost gauge is just a cheap one i fitted. The car came with a vacuum hose pointing into the drivers face. Positive boost made for a lovely gush of wind up your nose.

Old wheels are sitting in my study, needs new rubber. At least i can chop n change when i feel like it now.

[joshg123]

I think ill email a photo to the previous owner, i think he will cry a little at how nice you have it looking...

Still havent seen a good skid however in your ownership, all ive seen is madness when i do one in burnout court :P

[TJ]

Owain ... doesnt skid.

[flamo_damo]

Fuck this thing looks amazing, so simple and clean - love it!

[Jimmy_S]

Old wheels are sitting in my study, needs new rubber. At least i can chop n change when i feel like it now.

Can put my 265's on? ;)

[RH8 GTR]

Looks great man, Not many nice 4 doors around! Nice stance ya'll

[Skitzo]

From one four door brother to another. Good work son.

[Milhouse]

Thanks guys, always nice to get positive remarks about it.

The only one ive had from a stranger was a maori @ BP with a white r33. "hey bro nice wheels, are they built for drifting"

[Jimmy_S]

Thanks guys, always nice to get positive remarks about it.

The only one ive had from a stranger was a maori @ BP with a white r33. "hey bro nice wheels, are they built for drifting"

I hope you said yes!?

[1JZNOSHIT]

car looks killer mate.

needs a cooler hanging out the front and maybe some clear side indicators.

wheels are the bomb!