View Full Version : 96 Hilux powersteering hose
mr_mike
09-11-2010, 11:57 AM
Is any1 wreckin or knows some one who is wrecking a 89-96 hilux?
I need the high pressure powersteering hose that goes from the pump to the steering box.
Tried toyota genuine and part is ex-japan and i would need to sell my kidney to purchase it.
Tell me what length, size and what ends (banjo or threaded, 90 deg or straight etc) and should be able to make you one pretty quick
mr_mike
09-11-2010, 05:03 PM
its not just a normal hose or i would of gone to Enzed or such already, its a banjo joint, then rubber hose then becomes a solid pipe and traces along the front x-member to the steering box on the other side of the engine bay.
Where the rubber hose crimps to the metal part there is a tiny split but being under pressure it sprays shit everywhere as u turn the steering wheel.
dattoman
09-11-2010, 06:51 PM
Enzed or such can replace the rubber bit and reuse the steel sections
They are doing my Caddy one now
Although not ideal, may be able to cut off the ferrule and re crimp new hose on there
Failing that give me a yell, we'll make a whole new hose/tube section for you.
..well I get one of the pingpingpingpings out back to make the tube n I'll smash a hose on it :)
mr_mike
09-11-2010, 08:08 PM
all good mate sourced a 2nd hand one of another forum.
cheers anyway.
Chaotic
09-11-2010, 10:05 PM
house mate had his done by enzed for like $180 cash, failed to ask me...
dattoman
10-11-2010, 06:28 PM
$120 for Caddy hose
Done onsite
mr_mike
11-11-2010, 10:32 AM
looks like i'm gonna have to head town Enzed or something this avo or tommorrow can get a diesel one but found out they are diffrent to petrol. Have phoned every commercial wrecker in perth and no1 has one
Powered by vBulletin® Version 4.1.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.