Satan's Creation (6L Thunder)

[_WREXTC_]

Been meaning to Showcase since i got it back in April.
Since owning for this short time its had the following done...

L98 6L
Custom grind Comp Cam(Lumpy as f%#k)
Valves
Springs
Retainers
Billet Timing Chain
Higgins OTR
Pacemaker 4-1 3" Headers
Custom Twin Full Exhaust
Short Shift Rip Shifter
King Super Lows
20" Venti Retros Custom Painted
Debadged


She made 451hp at the rears...final road tune, yet to be complete as it was to wet on the roads when cam was installed.

Future mods(not to far away...=)

3.91 Diff Gears
Ceramic tarantula Clutch
Tein Coilovers

Hopefully in time for Powercruise, =)


http://img638.imageshack.us/img638/8223/p1050813medium640x4801.jpg

[Mad_Aussie]

I really like your choice of colour mate, its not factory is it? Reminds me of tomatoes. Nice numbers too, do you have a graph to post up?

[mitchy]

yeah it is a factory colour
not a fan of the rims, they would look better on something retro as the name suggests.
decent power figure though!

[_WREXTC_]

Haha nai, its Ignition Orange...its a factory thunder colour ay...
hopefully if i get the road tune done tomorrow..i can get the graph..4got 2 grab it when i picked the car up..was to excited to jus drive, lol

[_WREXTC_]

yea, bought the car with these rims on them..was lookn at gettn sumfink different for powercruise, matt black 20's with dish, is wat im thinkn, =)

[AGIT8D]

Haha 3" headers eh? And I thought my 1 7/8" primaries were big. I think you mean 3" collectors. :)

[mercin]

who installed the cam/tune?

[_WREXTC_]

Eddy @ Active Automotive

[Tocchi]

ute's looking silky man :)

[pgc]

yea, bought the car with these rims on them..was lookn at gettn sumfink different for powercruise, matt black 20's with dish, is wat im thinkn, =)

I sincerely hope you're taking the micky with that kind of English.

Nice car, though. With 3.9s it should pull rather well.

[_WREXTC_]

haha, its jus the way dat i abbreviate words, lol....
hopefully she will... im gonna get the rear end harden up as well..

-firmer rear bushing's
-and harrop anti tramp diff cover(she tramps a bit, cause the tyres r hell grippy, n shes IRS)

[PSI 304]

haha, its jus the way dat i abbreviate words, lol....
hopefully she will... im gonna get the rear end harden up as well..

-firmer rear bushing's
-and harrop anti tramp diff cover(she tramps a bit, cause the tyres r hell grippy, n shes IRS)

To save your longevity around here...dont abbreviate. You learnt english at school? Round these parts its recommended you use it :)

http://www.antilag.com/forums/showthread.php?t=29945

Words from El President'e himself ;)

[AGIT8D]

haha, its jus the way dat i abbreviate words, lol....
hopefully she will... im gonna get the rear end harden up as well..

-firmer rear bushing's
-and harrop anti tramp diff cover(she tramps a bit, cause the tyres r hell grippy, n shes IRS)

If it tramps you haven't got enough horsies :)

[SimonR32]

"Satan's Creation"

He is in worse form than Benny on a bender!

[cactus]

Fucking lol ^

Nice car, colour is awesome!

[adrenalin]

Nice ute

Bad English

[_WREXTC_]

Sorry guys/girls, didn't know that I was doing an English assignment. Lesson learnt, I'll know better for next time.

BTW nice dress, would look good on you.

Car never used to tramp until I put new tyres on her.
Eddy @ Active also said that the model that I have, can tramp a fair bit.

Car is booked in tomorrow for Road Tune/tidy up, will post dyno sheet up tomorrow night. =)

[pgc]

Sorry guys/girls, didn't know that I was doing an English assignment. Lesson learnt, I'll know better for next time.

BTW nice dress, would look good on you.

Car never used to tramp until I put new tyres on her.
Eddy @ Active also said that the model that I have, can tramp a fair bit.

Car is booked in tomorrow for Road Tune/tidy up, will post dyno sheet up tomorrow night. =)

Wow. I can read that. Well done.

[_WREXTC_]

Thanks, do a get a gold star?


BTW, what do you guys/girls think of these rims?
I'll get them custom painted Matt instead of gloss black, and Orange instead of Red.

http://img693.imageshack.us/img693/3079/genevablackred500x500.jpg

[Mad_Aussie]

No Es Bueno.

Work XD9?

[mitchy]

matt black centres, gloss black dish, get rid off all the red bits... and they will actually look alright i reckon.

[_WREXTC_]

Yea, there nice rims, but I don't think that they would suit my car.

[SEXUAL TYRANNOSAURUS]

LOL why post the pic up then?

[duste]

LOL why post the pic up then?

I think he was talking about the Works...

[_WREXTC_]

LOL why post the pic up then?


I was talking about the Work Wheels.

[stumps.]

My tramps like a fat sluts cellulite walking down a steep incline.

As dan said more power required.

[_WREXTC_]

My tramps like a fat sluts cellulite walking down a steep incline.

As dan said more power required.

haha, u reckon that diff gears will stop it?

[ben351]

nah man have to live with this shit ... its like herpes ... should have checked before you jumped in ... now its stuck with you for life :)

nice rims tho !!

remind me of Boyyd Junkyards

[RELEASE]

haha, u reckon that diff gears will stop it?diff gears will help, harrop diff cover will help, bushes will help....will you stop it???? NOPE

youre already pushing decent power out of it with 450rwhp! but there are factors working against you.
20" china spec heavy rims - greater unsprung weight to turn and 20" on a VZ is a decent wheel to turn
lowererd springs - ride height of that low isnt gonna help at all
standard shocks i assume? - wont help either
tyre choice

like has been said you can keep all the above and cure it with more power so instead of tramping you spin the tyres.
other than that not really

[stumps.]

haha, u reckon that diff gears will stop it?

nope i have 3.9's

As mentioned things that help are

Good tyres
Diff cover / Mount
Rear subframe bushes
Good shocks

[INSINR8R]

Nice car.

[_WREXTC_]

nah man have to live with this shit ... its like herpes ... should have checked before you jumped in ... now its stuck with you for life :)

nice rims tho !!

remind me of Boyyd Junkyards

bahaha

[_WREXTC_]

diff gears will help, harrop diff cover will help, bushes will help....will you stop it???? NOPE

youre already pushing decent power out of it with 450rwhp! but there are factors working against you.
20" china spec heavy rims - greater unsprung weight to turn and 20" on a VZ is a decent wheel to turn
lowererd springs - ride height of that low isnt gonna help at all
standard shocks i assume? - wont help either
tyre choice

like has been said you can keep all the above and cure it with more power so instead of tramping you spin the tyres.
other than that not really

thanx 4 ur advice man... much appreciated, =)

[_WREXTC_]

nope i have 3.9's

As mentioned things that help are

Good tyres
Diff cover / Mount
Rear subframe bushes
Good shocks

thanks 4 advice man, hopefully i can get most of those items done before powercruise, =)

[Brute]

Harrop diff cover will do dick as far as axle tramp is concerned.

Better off spending your money elsewhere.

[shane]

Harrop diff cover will do dick as far as axle tramp is concerned.

Better off spending your money elsewhere.

+1

[ruler]

looks hot :)

[Smoked]

im not trying to be an ass but id put hard earned dollars on it not making 450 at the rears with said mods, no fast manifold either?
it just sounds like alot.
comparsion:
'metalcraft built vxss 6.7litre 470rwhp' .... ...

[VT SS]

Check your diff mount if its axle tramping, Pedders do a diff support mount that braces the standard bushing, might be something worthwhile to look into.

[Tre-Cool]

im not trying to be an ass but id put hard earned dollars on it not making 450 at the rears with said mods, no fast manifold either?
it just sounds like alot.
comparsion:
'metalcraft built vxss 6.7litre 470rwhp' .... ...


In shootout mode, it's possible. in non shootout mode, not a chance.

Dyno Dynamic dyno's make for wonderful power gains depending on the ramp rate chosen.

I dont have an issue with axle tramp in my ute, so i would suggest keeping a reasonable rear end height with some 9.5" rims with sticky tyres.

[ossie_21]

Thanks, do a get a gold star?

I. But because of that, no you don't....

Nice car, stands out well with the colour. Burnout?

[AGIT8D]

im not trying to be an ass but id put hard earned dollars on it not making 450 at the rears with said mods, no fast manifold either?
it just sounds like alot.
comparsion:
'metalcraft built vxss 6.7litre 470rwhp' .... ...

Dyno's are tuning tools :) My car makes all sorts of crazy figures depending on the dyno/tyre pressure/OTR filter in/out etc etc etc.

As a reference my pig made 440 at a car show dyno comp and beat a cammed 6L which made 380..

Eddie builds tough combos so this thing should make decent numbers, but exactly what those numbers are is anyone's guess. If he has his doubts about what the dyno says then he can always back it up with MPH I guess

[H1GHROLLR]

Dyno's are tuning tools :) My car makes all sorts of crazy figures depending on the dyno/tyre pressure/OTR filter in/out etc etc etc.

As a reference my pig made 440 at a car show dyno comp and beat a cammed 6L which made 380..

Eddie builds tough combos so this thing should make decent numbers, but exactly what those numbers are is anyone's guess. If he has his doubts about what the dyno says then he can always back it up with MPH I guess

coudlnt of been any better said . . . . EXACTLY how it should be

[mitchy]

im not trying to be an ass but id put hard earned dollars on it not making 450 at the rears with said mods, no fast manifold either?
it just sounds like alot.
comparsion:
'metalcraft built vxss 6.7litre 470rwhp' .... ...

not having a go at dan, but just because his is a 6.7L stroker, does not instantly mean its going to make more power than a 6L.
i know dan's has a whole assload of midrange power, whereas the cam in this 6L might be more peak power orientated?

but as said, dyno's are a tuning tool. go run the MPH or drop 4th to prove it.

[_WREXTC_]

Car is at Eddy's now. Hopefully get back around lunch.
I'll post up dyno graph as soon as get it, =)

[_WREXTC_]

I. But because of that, no you don't....

Nice car, stands out well with the colour. Burnout?


Bugger...
thanx man, =)

[stumps.]

Check your diff mount if its axle tramping, Pedders do a diff support mount that braces the standard bushing, might be something worthwhile to look into.

I have the noltec one of these and it only helps marginally. Is it worth the 30 bucks it cost.... Yes

[sprint347]

Hit up summoner and ask him about the suspension he had in his old VU SS ute.

IIRC it had quadrant springs, bilstein shocks and maybe a whiteline swaybar... went from HORROR wheel bounce to a skid machine!

[_WREXTC_]

thanks man, mite do that, =)