PDA

View Full Version : VG30DETT engine



TTZ
14-07-2010, 06:38 PM
I pulled the engine out of my car to find it wasn't the fully built monster I was expecting, I've pulled the heads and sump off and it's just a stock motor. I'm going down another path with the build and don't need this motor anymore so if anyone wants one to rebuild or as a spare it's here.

While the motor is in this state it would be worthwhile to re-ring the pistons. Number 6 had the bore washed with fuel when the #6 injector was being held open. The motor is apart so you or your mechanic can do a full inspection of the short motor and heads. compression results were all pretty high except #6

I have a polished plenum that is internally ported (including lower runners)as well that can be included for an extra $150 with throttle bodies

This motor comes with all accessories, but the air con compressor is still hooked up to the lines in the car. Turbo manifolds are included but no turbo's. Also there are no injectors or rail

Chasing $500, otherwise I may as well part it out for the heads and accessories


I won't be available to show anyone the motor until after the 30th as I'll be out of Perth, so unless anyone wants to come tomorrow you'll have to wait til then