Fridge+Wheels=Win

[Gladio]

Thought I would make a clean fresh showcase :)

It's a November 2007 Build Fraud BF MkII XR6Turbo Foulcoon

So I bought her back in early February 2009 after previously owning a BA MkI Turbo ute and a couple of Holdens.

When I first got her she was as stock as they came, but it was one of the last build Mk II's so it had a few extra things that the normal XR series didn't come with standard like the “run out” body kit and the FPV style dual zone climate control.


Picture:
http://i50.photobucket.com/albums/f332/nerotos/new%20car/DSCF0766.jpg

About March I bought my self a new set of wheels (Lenso Groove) and also was lucky enough to find a genuine XR8 steel bonnet.

Picture:

http://i49.tinypic.com/m7ar8p.jpg

After the wheel's and bonnet I started to collect gear for the build of the car and by May the car had the following installed:

Plazmaman 1000HP Intercooler.
Plazmaman 3" Cold Side Piping.
Plazmaman 2.5" Hot Side Piping.
Plazmaman 4" Cold Air Intake off Turbo into closed Plazmaman box
Plazmaman Oil Cap
Odyssey battery (small battery in box with Pod Filter)
Turbosmart Megasonic BOV.
12 PSI Actuator
Ported waste gate/flapper mod
62lb Siemens Deka Injectors.
Walbro Intake Fuel Pump.
XCAL 3 box(

-Exhaust
4" Avalanche Dump Pipe.
5" Ballistic 100cell Cat.
Twin 2.5" Stainless Steel Pacemaker cat-back quad exhaust system with 3" tips.

Exterior:
Typhoon Front bar.
Typhoon side skirts.
GT Rear Bar
GT wing (modified)

Suspension:
SL Front King Springs
SSL King Springs
Picture:
http://i50.photobucket.com/albums/f332/nerotos/new%20car/SDC10140.jpg

The first tune it made: 336.2RWKW / 450.8RWHP
Then a week later the tune was finished off with a 352.7RWKW / 472.9RWHP

A few months later I went down to WAW for a run and managed to pull 11.56@ 122.78 on the 20” street tyres with a 1.993 60'

Picture
http://i37.tinypic.com/2n1f8fd.jpg

By November I needed to have the ZF gearbox touched up so I had it fully rebuilt and at the same time the tune had a bit more of a touch and the outcome was 361.9RWKW / 485.3RWHP

Also had a photoshoot with Rick McDowell for Street Fords car magazine

Picture:
http://i48.tinypic.com/16lcu11.jpg
http://i48.tinypic.com/34r7f6h.jpg
http://i50.tinypic.com/2hhekpf.jpg

And coming now just recently I have done some more work on the car and added:

19” Hiro wheels
Nizpro Plenum
Nizpro Valve Springs
Tial 38mm External Wastegate with screamer
4 Piston front brembo brakes with drilled rotors
Polished pieces in the engine bay

Funny enough the new power result showed less for some reason but power curve etc was a lot better, was told could have been due to weather, new wheels, how it was put on dyno etc etc. Its basicly just a figure, can definatly tell the difference when your driving the car. Dyno sheet showed 357RWKW.

Picture:
http://www.ignitionphotos.com/PhotoShoots/Zaffs-BF-XR6-Turbo/IMG3465/872766859_epA78-XL.jpg

http://www.ignitionphotos.com/PhotoShoots/Zaffs-BF-XR6-Turbo/IMG3466/872766873_E4KZx-XL.jpg

http://www.ignitionphotos.com/PhotoShoots/Zaffs-BF-XR6-Turbo/IMG3468/872766898_kCung-XL.jpg

http://www.ignitionphotos.com/PhotoShoots/Zaffs-BF-XR6-Turbo/IMG3480/872766921_cJQtc-XL.jpg




/End My life story.

Do I get a Grammy award also for CSB of the year?

[Tocchi]

those rims look a lot better than the other ones :)
specially with the brembos behind them.

you going to go to a plenum? or retain the bbm?

[kurbn]

*You're 2 Easy :P

looks bloody hot, like a GT with a front mount. Quite like it!

[AmpeD]

Man they go pritty good for a fridge, bulk torque on boost

[Mistikal]

*You're 2 Easy :p

... then was changed to "YOURE TOO EASY", then was removed all-together :)

Looks clean as, definitely without the decals on the bulge too. New wheels look tops, and makes decent power to boot :)

[Gladio]

Lol oops! forgot to add the Plenum haha. Yeh the Nizpro plenum is also installed.

I need a decent engine bay pic!

Yeh, The decals was removed over 5 months ago. But im sorta getting bored with the non decal look at the moment. Thinking of getting something else soonish.

This was also before the New Nizpro Valve springs
<object width="320" height="240" ><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://www.facebook.com/v/426245640922" /><embed src="http://www.facebook.com/v/426245640922" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="320" height="240"></embed></object>

I think i'm also losing my hearing.... <3 gate

[jaybee]

i like that fridge.

[sam5709]

The new rims on this car look 100 times better :D

[Halle Terry]

I hate XR6T's.

The gains from putting an exhaust on those cars outweighs my car total power :(

Dope car, hefty figures!

[Sammish]

Lovely car, i like the decals =P Looks fantastic and they r some impressive numbers. Look forward to seeing you out and about.

[Stef]

no decals = win. looks boss zaff! spesh with new wheels.

[duste]

New wheels are 10000000x better!

[SLIPPERY]

lol who cocked up with the 'your' in the first instance?

I see it was changed to 'youre' a little later

[Gladio]

Thanks haha

I originaly wanted your2easy as plates but couldn't get them as they were "offensive" from what the DPI people said. So I changed it around, but yeh there gone ages ago.