{CHASN10S} vt ls1 drag car WA PERFORMANCE

[H1GHROLLR]

Name: {CHASN10S}
Model: VT2
Year:2000
Colour:white
Bodykit:stock
Engine Type:LS1
Engine Mods:THERE COMING
Power:stock
Exhaust:stock
Gearbox:4L60E
Diff:3.46lsd
Brakes:stock
Suspension:FE2
Wheels/Tyres:chasers 15 inch
Interior:stock exec
Other Mods:none
Stereo:none
Build Period:not even started
Cost:
More info:THE ABOVE INFOMATION WILL CHANGE AS PARTS ARE ADDED
Future Mods:HEADS,CAM,NITROUS,LS6 MANIFOLD,EXTRACTORS,80LB INJECTORS,4.11 FULL SPOOL,044 PUMP,FUEL REGULATOR,FUEL CELL,TRANSCOOLER,FUEL FITTINGS,ROLL CAGE,RACE SEATS,5500 HIGH STALL,SLICKS/FRONT RUNNERS IM SURE IM MISSING ALOT OF THINGS BUT I WILL ADD AS THINGS PROGRESS

6 weeks into this build

http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00766.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00767.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00770.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00771.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00772.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00769.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00790.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00789.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00795.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00792.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00797.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00796.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00800.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00799.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00854.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00874.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00873.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00871.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00867.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00900.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00898.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00913.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00914.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00915.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00918.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC00919.jpg

[savage1987]

Keen to see a front wheel picked up

[H1GHROLLR]

:( i think irs is gona fail for the wheel up situation

[Tocchi]

i like this thread. usually its drift cars that are taken off the road and build up ... quite different to see the straight line versions :)

[H1GHROLLR]

LOL im sure i could use this as a drift car NOT , all good till the first corner lol then it would be down side up in the sand i reackon, you can polish a turd but its still a turd :p

[beefcake]

nice i love watching ground up builds like this, no fluff all business

[eScoRt20]

leaving airbags in??? fuck driving that....

[H1GHROLLR]

nope passenger airbag is removed, drivers is still in but the control box no longer has power , on the other hand i would prefer to cop an airbag in the head with a helmet,neckbrace and harness then have one go off in a daily ??

[eScoRt20]

I'm thinking more explosive charges when running a highly flammable fuel... but hey, if it's disconnected no worries.

[Gladio]

YES! This should be interesting. Ah the good old VT <3

[Torquen]

Keen to see results!

[DT95WA]

I'm thinking more explosive charges when running a highly flammable fuel... but hey, if it's disconnected no worries.

LOL, What?

[H1GHROLLR]

cheers for comments guys, as said im not expecting huge things from it im just keen for a run i dont expect to win anything for a long time, i raced speedway for 10 years and soon realised when you get competitive and take it too serious there is no fun in it at all so im just gona get out on the strip and have a blast . . .

[beefcake]

ahh that explains your liking of the speedway style kirkey seat , damn dunno how you guys get in an out of them

[H1GHROLLR]

LOL ha ha ha you have to turn side ways then straighten up, there so comfy once your inside, i use to do 40 laps around a chopped up clay oval and still get out fine, but the next day you pay for it LOL

[duste]

LOL ha ha ha you have to turn side ways then straighten up, there so comfy once your inside, i use to do 40 laps around a chopped up clay oval and still get out fine, but the next day you pay for it LOL

+1, I've sat in my old mans GTR-XU1 dirt track car and those seats are an absolute pain in the ass.

Looking forward to the updates, keep 'em coming.

[AGIT8D]

Looks pretty rad in person, hope I'm there when it chews a motor at the track :lol:

[H1GHROLLR]

dan what are you implieing, that im gona run some stupid amount of gas :p lol yeah im just hoping nothing comes through the floor at me, dont want to drop anything on the track and stop the racing though :)

[AGIT8D]

hahaha yeah that's pretty much what I was getting at :D

[H1GHROLLR]

lol u crack me up dan , why didnt you show ya face at auto x

[AGIT8D]

cbf :) Was gonna pop up to say gday to matt, jords etc but decided to go to Brighton for a few beers and a feed then engagement party at Frasers.

If you said you were going to do huge burnouts I would've gone. Whos rims did you put on the HAYBA1LR?

[H1GHROLLR]

lol @ HAYBA1LR , and i did do huge burnouts :P i used a mates rims , i should really chuck up the HAYBA1LR thread on here hey but i reackon it will get flamed hardcore

[AGIT8D]

i thought it was on here? if not do it. keen2see pics of uninstalled nitrous bottle and methanol fuel lines!!!!!!

[family guy]

LOL im sure i could use this as a drift car NOT , all good till the first corner lol then it would be down side up in the sand i reackon, you can polish a turd but its still a turd :p

Cant polish said turd. but it could be rolled in glitter:lol: dont get the cutting of the door shells then putting trims back on. Looks the goods either way.

[PSI 304]

Cut out doors for weight reduction, then would probably have to be sheet metalled or covered by something...sharp edges = hazard. Door trims would have been easiest and cheapest way at the time my guess, and minimally heavier than other solutions.

[Tre-Cool]

what rims were you looking to run 10 or 8" slick?

[H1GHROLLR]

9 inch slicks bud , as for the doors being cut out, i removed the window mech and cut to the shape of the trim,pinned windows, i am going to run sheet metal eventually but surprisingly the standard ones weigh nothing anyway, sheet metal/carbon is just for wank really i guess

[shane]

Hows this progressing, only a couple of month until the season fires up. :)

[H1GHROLLR]

lol its not :p as faras car/body/shell goes its pretty much there , but now driveline side has to be done im seriously thinking which way i should go ? cubes or forced hmmmm

[shane]

Cubes are good.

[H1GHROLLR]

im with you on that one , what ever i buy wont be till the doller is good and i will bring something back from usa

[AGIT8D]

Run the 346 on gas until you decide which way you're going to go.. Might as well have some fun with it til you make plans for a bigger combo. This is all for fun after all so get out there and have some!

[H1GHROLLR]

he he he it would be fun to just make huge ls1 mess all over the plex with a 500 shot of giggle gas :p i will be handing out pistons to the crowd

[stumps.]

There is a thread on ls1 about someone who ran numerous passes on a stock 346 with gas. He later turboed it stock.

Very good read if you can find it

[AGIT8D]

nitrous isn't really the devil most think it is, if you can find a good tuner. forged pistons certainly wouldn't go astray but to have a bit of fun you should just give it a go i reckon. rip the nitrous kit off the clubby and put it on the drag car!

[Stef]

just nos it. if it pops then cubes!

[shane]

I'd go nos on your motor until it dies. Remember your cage is only good for 10's anyway so start off aiming for low 11's in super street then up the nos for mid 10's and super sedan. I started straight off in super sedan and it takes the enjoyment out of it getting knocked out in the first round every meet while you learn.

[H1GHROLLR]

UPDATE

spent today removing the motor and box as the motor from my clubby will now be making home in the vt over the next few weeks cheers to malcom (fugitv) and sal (af 08 wa) for helping today :) pics below, also the motor removed from this is up for grabs too , 87,000k's great runner pm for details

http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01488.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01489.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01490.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01491.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01492.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01493.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01494.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01495.jpg

[Scaf]

What's going in the clubby?

[AGIT8D]

http://i31.photobucket.com/albums/c378/lxhatch/253conversion029s-1.jpg

[H1GHROLLR]

i love you dan , find any lady boys on holiday ???

[AGIT8D]

haha the 253 should go hard mate!!

na spent all holiday buried in the mrs so no chance to find any ladyboys... let me know if you have any luck with 'em in bali :)

[H1GHROLLR]

some pics of the bay with all the shite that a dont need removed and wiring being tidyed up etc , also look closely underneath it seem a noonga fella has become trapped underneath it some how :(

http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01312.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01311.jpg

[AGIT8D]

Well played not bothering with the fuse box and ABS!! Getting this running > Taking years making it too pretty :D

[H1GHROLLR]

meh i think the abs and fuse box together weigh like 1kg lol it can stay in the bay , i just wana get out there and hurt some parts :)

[Tre-Cool]

I give props to Sideshow Performance wiring over in sydney. i sent them a stock vz fbw harness and they converted it back to cable and it came with just the required relays and fuses to run without all the extra shit in the car.

Not sure if you have followed my build on ls1 but there are pics of my ute's engine bay their.

http://www.ls1.com.au/forum/showpost.php?p=1738734&postcount=89

[KPWISHN]

Well played not bothering with the fuse box and ABS!! Getting this running > Taking years making it too pretty :D

FML!!!

[H1GHROLLR]

FML!!!

nah man soooooooo jelous of your car , everytime im at the shop i get green with envy. . . .

[KPWISHN]

Haha, yeah it's no overnight job. Look forward to seeing this in action. Gunna go a bucket load of gas in with the built motor? Better weld in a few extra bars in the cage. :)

[AGIT8D]

FML!!!

HAYBA1LR has 100 cars already, pretty ones and fast ones, yours on the other hand should be your only real pride and joy for the next 3-5 years - so I can see why you've gone to the extra lengths!

But it would be nice to see it out there this season Lewis, if everything comes together in time :)

[H1GHROLLR]

HAYBA1LR has 100 cars already, pretty ones and fast ones, yours on the other hand should be your only real pride and joy for the next 3-5 years - so I can see why you've gone to the extra lengths!

But it would be nice to see it out there this season Lewis, if everything comes together in time :)

cheers mate :) lewis's car certaintly is one serious piece of machinery and definatly has the right man building it


Haha, yeah it's no overnight job. Look forward to seeing this in action. Gunna go a bucket load of gas in with the built motor? Better weld in a few extra bars in the cage. :)

hahaha plan is to wack some bigger and better heads on then have some runs N/A which in theory should go very low 11 if not a high 10 ? maybe ? then wack some gas in and max the cage out till i feel the need to go faster , :p then josh will have some new bars to smash in if he loves me enough . . . .

[H1GHROLLR]

dropped the motor off to mitch today for it to receive some more loving via a very well thought up custom grind cam and some more higgins heads

UPDATE (NOT TO DO WITH THE CAR:) )

well we have finally decided to get a bit more serious with the racing side of this car and it now has a registered business name to it, more of a team name then anything but will also have stickers and apparel behind it too, my self and malcom have got the name secured and planning into clothing and stickers is now in process, the name of the team/club/business is MRC MOTORSPORT , i dont want any one to get the wrong idea and think this will have anything to do with the performance industry and/or anyone elses cars , IT IS NOT A WORKSHOP, simply a race team that will be selling merchandise to advertise itself. . . stay posted for updates on the club etc and if you are interested in supporting the team by repping stickers or clothing please contact me and i can give you a little more info..... mark

http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01324.jpg
http://i563.photobucket.com/albums/ss76/dartyvxclubby/DSC01328.jpg

[savage1987]

nice move mark :) stepping up in the world huh


missing my car man :( keen to get back, build and drive. Meanwhile, camming this 304 out of boredom


/off topic ramble about nothing



Sam

[402]

what happend to this ?

[H1GHROLLR]

Tre cool's dad now has it and i believe its running a decent size turbo.

He may be able to confirm this for you.

[Turbo2.6L]

It runs a 416ci or similar engine with a T1000 turbo kit & runs 10.40's

[Tre-Cool]

yep as above. runs 10.3's. but thankfully the t1000 kit is coming off soon for a twin turbo kit so we can actually run some boost in the fucker.

[SSICK]

have a brand new plazmaman 450x550mm cooler for 1k if it helps....suits vt-z