Lonewolf
28-03-2010, 03:16 PM
Figured i'd put this up just in case someone is after a cheap track car, or something cheap that they can fix up.
The hail damage is the lightest of any i've seen.
~15 dents on bonnet, ~5 on doors, ~5 on guards
Item: 1994 N14 Jap Spec SSS
Location: Perth
Website: nil
Item Condition: needs some TLC
Reason for selling: change
Price and price conditions: $7000 as is, less minus brakes/wheels
Extra Info: see below
Pictures: see below
1994 Pulsar SSS
Gunmetal Grey
Power sunroof, power windows
~230,000km on chassis
engine:
Sr20ve engine swap
sr16ve n1 cams
JWT adjustable cam gears
Brian crower valve springs
NGK spark plug leads
Greddy MSS (for control of the VVL solenoids)
Nistune ECU in n14 ECU
3" exhaust with high flow cat (with spare rear section to keep noise down)
ASP ceramic coated 4>2>1 stainless extractors
generic pod filter
Drivetrain
xtreme HD organic clutch
xtreme 4kg chromoloy flywheel
N15 VZR VLSD gearbox with custom shortened shaft (new CV's)
B+M short shifter
Solid polyeurathane engine mounts
suspension / brakes / wheels
aftermarket rear swaybar
KYB excel G shocks and Lovells Low springs (currently riding on stock stuff)
16" Buddy club p1 rims with brand new Toyo R1R semislicks
Wilwood 4 piston brake upgrade (280mm) and braided lines (with spare set of rotors and pads)
Interior
3x guages (oil temp, oil pressure and water temp) DIN mounted - currently not hooked up
Sony head unit and Bullet splits front, coaxial rear
Blue LED dash lights
Real checkerplate floors
The bad
Light hail damage
Paint on the roof/wing is faded and needs respraying.
Glovebox is broken (needs the clip replaced)
B+M rattles (very common)
Noisy Power steering pump
Passenger door is an aus spec one (with hole for window winder). Have 2x Jap spec door trims to go with the car. Suggest both need a retrim, but passable as is.
car has done a 14.7@98mph at the strip, potential for high 13's
193hp at the hubs, without playing with cam gears/tune
Price is $7000 as is
or $6000 minus brakes and on std wheels (provided I can find some to put on)
PM to discuss options if required
http://members.iinet.net.au/~lonewolf3/pulsar/IMG_0301.JPG
The hail damage is the lightest of any i've seen.
~15 dents on bonnet, ~5 on doors, ~5 on guards
Item: 1994 N14 Jap Spec SSS
Location: Perth
Website: nil
Item Condition: needs some TLC
Reason for selling: change
Price and price conditions: $7000 as is, less minus brakes/wheels
Extra Info: see below
Pictures: see below
1994 Pulsar SSS
Gunmetal Grey
Power sunroof, power windows
~230,000km on chassis
engine:
Sr20ve engine swap
sr16ve n1 cams
JWT adjustable cam gears
Brian crower valve springs
NGK spark plug leads
Greddy MSS (for control of the VVL solenoids)
Nistune ECU in n14 ECU
3" exhaust with high flow cat (with spare rear section to keep noise down)
ASP ceramic coated 4>2>1 stainless extractors
generic pod filter
Drivetrain
xtreme HD organic clutch
xtreme 4kg chromoloy flywheel
N15 VZR VLSD gearbox with custom shortened shaft (new CV's)
B+M short shifter
Solid polyeurathane engine mounts
suspension / brakes / wheels
aftermarket rear swaybar
KYB excel G shocks and Lovells Low springs (currently riding on stock stuff)
16" Buddy club p1 rims with brand new Toyo R1R semislicks
Wilwood 4 piston brake upgrade (280mm) and braided lines (with spare set of rotors and pads)
Interior
3x guages (oil temp, oil pressure and water temp) DIN mounted - currently not hooked up
Sony head unit and Bullet splits front, coaxial rear
Blue LED dash lights
Real checkerplate floors
The bad
Light hail damage
Paint on the roof/wing is faded and needs respraying.
Glovebox is broken (needs the clip replaced)
B+M rattles (very common)
Noisy Power steering pump
Passenger door is an aus spec one (with hole for window winder). Have 2x Jap spec door trims to go with the car. Suggest both need a retrim, but passable as is.
car has done a 14.7@98mph at the strip, potential for high 13's
193hp at the hubs, without playing with cam gears/tune
Price is $7000 as is
or $6000 minus brakes and on std wheels (provided I can find some to put on)
PM to discuss options if required
http://members.iinet.net.au/~lonewolf3/pulsar/IMG_0301.JPG