1.5" V-band clamp and ends, where to get??

[HIKARI]

I'm chasing after a 1.5"(38mm) V_band Clamp and Flange so I can refabricate my DP and convert my recirculated external gate to a screamer. Ebay Australia doesn't help nor ebay USA. Searched through tweak it and some local sites but no luck. Any suggestions possibly locally?

[stock_e30]

I'm chasing after a 1.5"(38mm) V_band Clamp and Flange so I can refabricate my DP and convert my recirculated external gate to a screamer. Ebay Australia doesn't help nor ebay USA. Searched through tweak it and some local sites but no luck. Any suggestions possibly locally?

i had to get a 2.5 inch one and the only place i could get it from was at an exhaust place in myaree next to ian diffen on norma rd, i think its number 85 or something, could try them, not sure if they have 1.5 inch but

[DCEVO]

Ring Seth King at Mettams in Kelmscott 9495 2544 he does turbo exhaust
Maybe he can help ?

[HIKARI]

Something this small:

http://www.roadraceengineering.com/parts/wastegates/wg44vbands.jpg

[HIKARI]

HaLp!!

[duste]

http://cgi.ebay.com/ebaymotors/Tial-38mm-wastegate-Inlet-Clamp-V-band-MV-S-Vband-mvs_W0QQcmdZViewItemQQhashZitem3ca23458a2QQitemZ26 0419377314QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcce ssories

Fail that, you could contact TiAL or a distributor of theirs directly and see if they sell the v-band clamps (TiAL wastegates use 38-44mm v-bands).

[duste]

Oh, and the flange/end: http://cgi.ebay.com/ebaymotors/Tial-38mm-wastegate-Inlet-Flange-V-band-MV-S-Vband-mvs_W0QQcmdZViewItemQQhashZitem3ca23458c5QQitemZ26 0419377349QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcce ssories

[HIKARI]

wow, spot on. But US......

[duste]

Usually only takes me about a week to receive gear from the US, so it's not that long of a wait.

[DCEVO]

Turbotech in Redcliffe

[HIKARI]

called turbotech but no option they have no listing. Tried mtq as well with no luck. I got wayne@embleton to see if he can source it up for me as he's gonna do my scr33m3r.

[juggernaut]

If you haven't already sourced the parts......GCG turbos sell the Tial flanges and clamps...overnight delivery.

[HIKARI]

Thanks for info, I'll give them a call.

[juggernaut]

Michael Ramsey at CGG is your best contact......phone or email michael@gcg.com.au

[4A10SHN]

I'm chasing the same thing. I found rocket ind have the biggest range

[RRob]

I just bought Turbosmart 50mm ones for my gate to plumb back. Their gates are female and the flanges are male so had to machine a flange into a female to make it work.

[1JZNOSHIT]

I just bought Turbosmart 50mm ones for my gate to plumb back.

Hang on, what?

[Scradly]

When he got it engineered you muppet.
He did that 2 years ago.

[HIKARI]

Nop no luck with rocket ind and gcg. Back to US.

[juggernaut]

Is this the Tial MVS gate that you have?

If so they are available from ATP turbo, which I have found to provide very good service.

I'm also assuming you only want the outlet flange and v-band as I understand they are different to the inlet.

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=TIL-WGT-024&Category_Code=WGT

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=TIL-WGT-026&Category_Code=WGT

[HIKARI]

yeah i was looking at the egay ones seemed better price ($14)