Piece of shit 1J Camry.

[Halle Terry]

So I've been around for a while, figured I'd do one of these as I had nothing better to do.

I've had this car for about 3 years, done fuck all to it because of my uni student income. Has a bit of a colourful history, I'm adament it's been stolen in Japan and sent over here, reasons I say that is the VIN number is SCRIBED INTO THE WHEEL WELL, and the serial number on my single set of keys is also scratched off. Not dodgy at all. Some asshat has done a hack job of rolling the front guards and it has cracked paint there.

When I bought it from Melbourne and it got sent over here, it was actually in really good nick, bar slight scratches on the front and rear from asshat dock workers it was alright, oh and the lady who delivered my car to my house also rode the fuck out of my clutch as I saw it pull in, imagine the pangs of despair that I had.

So after about 6 months, my mate ran into the back of my car. Then this chick swiped the side of my car as I stood next to it, funny because I also said "Hey just watch out you're a bit close to my ca-" *scratch*

Then the almighty drift fail of my friend into my parked car. I was standing next to it and as he left he managed to pitch his car into the front corner.

Now it's got plenty of key marks, scratches and dents, basically killing any love and passion I once had for looking after her. I use to leave it dirty and my friends would write silly things on it, until some random spanner took it too far and wrote "KILL JEWS, ZEIG HEIL pingpingpingping" with a Swastika on the back of it. So now I clean it occasionally.

1997 JZX100 Chaser Tourer V,

1JZ-GTE VVTi
Factory Manuel
Torsen 1 way diff of unpredictable goodness.
Factory kit.

Mods:
TRD Airbag steering wheel
TRD Strutbrace
Esprit Front lip.
Blitz SUS Intake
Blitz Nur Spec Touring Catback.
Tein Type HE coilovers.
Work Meister 18x9 +36 18x10 +30
Sumitomo 225/40/18 on the front, 235/40/18
6000k Hid driving lights, 8000k Hid fog lights.
Pioneer head unit
HKS Exhaust Cam gear and HKS Timing belt.
Pivot Boost Gauge

As you can tell I'm struggling to fill my mods list.

Have a Blitz intercooler core sans pipes and a Sard BOV in the garage waiting to go on.

Power mods:
Dump pipe + Cooler pipes + EBC + PowerFC + Tune + dial in exhaust cam gear.

Driveline and brakes: New Endless front rotors, and pads all round. New clutch as the current one is shagged lightened flywheel, 1.5way diff. New set of bushes all round.

Body: rip off the rear wing get a boot lip spoiler, Ganador mirrors. Respray in Balloon white (Satin white with pearl through it) Or chocolate brown. Rims will probably be black if I got for brown, or bronze if I go for white. Dump it on it's hole when I get the front quarter panel fixed (Slight dent in it) But also contemplating selling the rims and getting harder offset, might get Meisters, XT7's, TE37's, CE28N's or something similar. I'm pretty into the American thing of slamming it as low as possible without an aftermarket bodykit. Also looking at getting a few silly stickers for it too.


Others: Probably get a Bride or Recaro when I can, oil pressure gauge as well would be handy. Would also like a series 2 interior, as it's black as opposed to off-dark blue.

As you can see I've got a build which will hopefully leave me with an all round street car, I'd like to slap a big turbo on it at some stage but that's too far down the track at the moment. Hopefully now that I've finished uni I can get some of this underway.

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs391.snc3/23852_317416478701_585903701_3530822_8257364_n.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs391.snc3/23852_317416493701_585903701_3530823_2589459_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-ash1/hs431.ash1/23852_317416503701_585903701_3530824_902329_n.jpg

As much as I bag her out, she's a great car, good on fuel, loves limiter, does skids all the time, never breaks down. Hopefully now I'll get fix her up and put her in the direction I want her to go.

[TJ]

You dont love it, sell to me mega cheap.

Thanks xoxo

[Halle Terry]

30k and it's yours haha. I would ask more but no permits lah.

[jivlah]

hey dude, you go to curtin right? i saw this a few times. love it!

[Halle Terry]

Sure do mate, graduated now but chances are heading back next year *sigh*

[mitchy]

find some nissan offset rims instead of that weak toyota offset. :shake:

i'm a big fan of the no kit, wide/low offset rims and DUMPED look... doesnt take much but it looks awesome.

[Halle Terry]

find some nissan offset rims instead of that weak toyota offset. :shake:

i'm a big fan of the no kit, wide/low offset rims and DUMPED look... doesnt take much but it looks awesome.

Yeah looking at some 9's +18 or something all round and dial in some stretch and camber to get em flush. I've started contemplating 19's as 18's don't fill out the guards as much as I want them to.

[mitchy]

when it's dumped 18's should look ok though, 19's might get pricey if its got a fair bit of camber dialed in too.

either way you cant go wrong with that style. :)

[Halle Terry]

Anyone know of any places that locally supply Jap clutches? Exedy/ORC/OS Giken/Cusco etc?

[Tocchi]

please source new clutch and then kill Central avenue again please :)

[Ben Wha]

http://www.exedy.com.au/AustralianDistributors.aspx?Surrounding10+CONTAINS =6000&suburb2=perth&state2=WA

[Joe]

until some random spanner took it too far and wrote "KILL JEWS, ZEIG HEIL pingpingpingping" with a Swastika on the back of it. So now I clean it occasionally.



:lol: :lol: :lol:

[Halle Terry]

please source new clutch and then kill Central avenue again please :)

:D :D :D

Looking at also changing my exhaust to make more noise.

Dump pipe + high flow cat and remove my hotdog and retain the current oval setup/get a dolphin pipe

or get a Reinhard system, (saw one on Yahoo auctions $350 full titanium!)

http://i1.frsimg.com/images/detailed_images/Reinhard_exhaust_01_12845_12848.jpg

http://www.reinhard.co.jp/takummi/gt_sports/gt_image/gt03ti.jpg
http://www.reinhard.co.jp/takummi/gt_sports/gt_image/gt02ti.jpg


http://www.exedy.com.au/AustralianDistributors.aspx?Surrounding10+CONTAINS =6000&suburb2=perth&state2=WA

Gave them a yell, $900+ they reckon sans flywheel.

$1790 for a ORC posted from over east + new flywheel.

Both are single plate heavy duty type clutches,

Still waiting on replies from distributes of Cusco, OS Giken and HKS,

Opinions?

[Halle Terry]

Looking at achieving similar fitment to this:

http://i66.photobucket.com/albums/h250/pmada/a21853c2.jpg

[Ben Wha]

Just go the exedy clutch, I'll help you install.

[ovaxitd]

model exedy?? will get you a price... or are all the r154 clutches the same??

[Halle Terry]

model exedy?? will get you a price... or are all the r154 clutches the same??

As far as I know all R154 clutches are the same, not even sure the VVTi model makes a difference the bottom end is the same.

[1JZNOSHIT]

:D :D :D

Looking at also changing my exhaust to make more noise.

Dump pipe + high flow cat and remove my hotdog and retain the current oval setup/get a dolphin pipe

or get a Reinhard system, (saw one on Yahoo auctions $350 full titanium!)

http://i1.frsimg.com/images/detailed_images/Reinhard_exhaust_01_12845_12848.jpg

http://www.reinhard.co.jp/takummi/gt_sports/gt_image/gt03ti.jpg
http://www.reinhard.co.jp/takummi/gt_sports/gt_image/gt02ti.jpg



Gave them a yell, $900+ they reckon sans flywheel.

$1790 for a ORC posted from over east + new flywheel.

Both are single plate heavy duty type clutches,

Still waiting on replies from distributes of Cusco, OS Giken and HKS,

Opinions?

exhaust noise, i might have something for ya if you want LOUD :)

[TJ]

Looking at achieving similar fitment to this:

http://i66.photobucket.com/albums/h250/pmada/a21853c2.jpg

Remember the channel 7 ads with the song "i thiiiiiiink i love you"

This car is my channel 7 ad

[millzy_88]

Definately needs more tractor offset Terry. I never realised it had been beat up so bad, always looks great to me. Although that could be the meisters blinding me with their awesomeness.

[Halle Terry]

exhaust noise, i might have something for ya if you want LOUD :)

I saw your car a few times at 22 but you were never in it! Was so keen to hear the Chiba special. Looking at buying one of his dump pipes at the moment.


Remember the channel 7 ads with the song "i thiiiiiiink i love you"

This car is my channel 7 ad

The colour of the car is teh ghey, but offset is win.


Definately needs more tractor offset Terry. I never realised it had been beat up so bad, always looks great to me. Although that could be the meisters blinding me with their awesomeness.

Hahah I really love the fact my car is white, hides all the glaring paint imperfections beautifully haha.

Update, still trying to source a clutch, got a good offer $765 delivered from over east! Exedy HD

[Halle Terry]

Just go the exedy clutch, I'll help you install.

Carton in it if you give me a hand :)

[Ben Wha]

I don't drink beer :(

I'll just help you.

[millzy_88]

Ill drink beer and not help??

[Halle Terry]

I don't drink beer :(

I'll just help you.

We'll sort something out haha. PS you ever done this before? Because I'm adamant I've got no clue haha.

[TJ]

You dont like black 100's?

GTFO- seriously, just leave. Dont look back. :(

[Halle Terry]

Admit it, my car done like this would be baller.

http://jasonsgrainofsalt.files.wordpress.com/2008/12/img_2785r.jpg
http://4.bp.blogspot.com/_hobymRrINyg/SIpKtnENoTI/AAAAAAAAACQ/4Gi5lBkr3To/s1600/DSC_0420.JPG

[TJ]

Your going to chop 2 doors off and drop in a shit motor?

:( :( :(

[Ben Wha]

We'll sort something out haha. PS you ever done this before? Because I'm adamant I've got no clue haha.

Something, hey? ;)

I have done many manual boxes before, so simple, I can smash it out fast if you have a rattle gun. If it was auto like the Aristo, I would hang myself. I will never change an auto box again.

[Turbo2.6L]

That 180 looks so hot with those meisters!
Your 100 also looks tops, just needs dumpage :D

[Halle Terry]

Your going to chop 2 doors off and drop in a shit motor?

:( :( :(

http://www.dahmus.org/blogimg/fry-see-what-you-did-there.jpg


Something, hey? ;)

I have done many manual boxes before, so simple, I can smash it out fast if you have a rattle gun. If it was auto like the Aristo, I would hang myself. I will never change an auto box again.

pills, skids - gobbies, you know my man lips are much stronger then Khalia's.

I'll have to do a bit of research into what it's involved, think I should also change over my first gear thrust washer, as apparently that's more or less the only weak point of the box.


That 180 looks so hot with those meisters!
Your 100 also looks tops, just needs dumpage :D

I know looks mint hey! I like that American style of dumped on its hole with a few stickers (non gay shopping list spec)

Thanks man :) In due time she'll turn out how I want her to look.

[TJ]

http://i66.photobucket.com/albums/h250/pmada/a21853c2.jpg


Quoted once more for sheer porn factor

[Halle Terry]

Mods, Yey!

Reinhard diff back (I took a bit of a wild guess when I bought this, it fitted the stock mid sections, however my current Blitz one and it don't quite fit together, it needs to be bent slightly to sit right)

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs533.ash1/31268_389753358701_585903701_4032315_8247014_n.jpg

Uras boot lip spoiler

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs533.ash1/31268_389753383701_585903701_4032317_3032683_n.jpg
INITIAL TEST FIT
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs573.snc3/31268_389753338701_585903701_4032314_7005418_n.jpg
FINAL TEST FIT
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs573.snc3/31268_390592463701_585903701_4048385_7555777_n.jpg

Exedy HD clutch

http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs404.snc3/24476_384723518701_585903701_3925115_1171806_n.jpg
INITIAL TEST FIT
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs424.snc3/24476_384723508701_585903701_3925113_3069485_n.jpg

Somewhere between here and Japan is my set of Dixcel slotted front and rear rotors, Endless pads and lines are about to be ordered too.

Then it's:

New diff bushings, dump pipe, cooler pipes, Bride, PFC, EBC, 2-way should all be coming along in the next few months.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs533.ash1/31268_390592363701_585903701_4048368_5802273_n.jpg

Sum total of about 5 hours of yelling and swearing. Much love to Benny_gaga, Cruscles and Tim Wong for their help.

Lowered the car about 15mm

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs444.ash1/24476_384404123701_585903701_3916925_2581305_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs404.snc3/24476_384404108701_585903701_3916922_367571_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-sjc1/hs404.snc3/24476_384477578701_585903701_3919141_5702403_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs444.ash1/24476_384404098701_585903701_3916921_5987985_n.jpg

Trying to get the clutch done so I can get onto my next immediate task which is selling the rims, and buying another set of S12P Meisters in 18x9 +20 18x10 +20, or failing that might try be cool and impress my friends by doing 18x9.5 +12 18x10.5 +15 or something.


Progress is slow, sure there are people here throwing crate motors in their cars, and buying nice parts and shit, and my car is pretty gay -well you know what. Fuck your couch hey.



UNRELATED PICTURE

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs573.snc3/31268_390592488701_585903701_4048390_5891714_n.jpg

[Stef]

lot of love for chasers from me! burnout pics not working for me though?

[easytiger]

Those pine needles look annoying
They live in your vents

[Halle Terry]

Benny_gaga wanted me to remember the smell of the forest wherever I went.

[Chris138]

INITIAL TEST FIT
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs573.snc3/31268_389753338701_585903701_4032314_7005418_n.jpg


Tough fitment

[ovaxitd]

so dirty... so many ways!!

[summoner]

how much do these cars weigh?

[1JZNOSHIT]

about 1450 in 5spd. i think?!

[millzy_88]

so dirty... so many ways!!

Yes, somone definately needs to write racial slurs on it again.

[Tats]

Scales at Sydney Dragway put mine over 1500kg in street trim. Possibly 50kg of Maccas wrappers in the back seat though.

[Halle Terry]

Yeah I might vinyl wrap it appease myself for the next year or so before it gets a respray. So it won't be AS dirty as it is now.

That said, I kind of like it more as a fucked up shitter then when I first got it and it was clean as.

[Stef]

what size rims/tyres r u runnin?

[Halle Terry]

Baby Meerkat sizing:

18x9 +36 225/40
18x10 +30 235/40

http://itech.pjc.edu/sctag/Meerkat/meerkat_babiesx.jpg

Keen to run 18x9.5 +12/22 or even 18x10.5 +15 if I'm trying to impress my friends.

[Stef]

hahaha wont impress me though. fyl hey?

[Stef]

haha i kid, im thinkin bout gettin one of my own, n lookin at ur avater, thats pretty much what i wanna run, on the same rims too. either them or gt-c's..

[Halle Terry]

Do it man, best choice I ever made (not like I bought many other cars to compare to, but whatever haha)

Haven't had an issue besides the clutch, other then that rock solid car.

Just do plenty of skids on limiter, buy some Japanese rims, everyone will love you. Look at me, I've got 4 friends!

[Stef]

haha, im in two minds, to go tojo powah, or datsun, tough choice! im diggin the lookyours has, minus the shitter part of it lol. just the whole slammed hard, stretched tyres, big dish, that sorta stuff.. its either this or a gtr..


ps am i included in these friends of yours :D

[Halle Terry]

I guess at the end of the day it's up to you, I love my car to bits, but my opinion is one sided. My car looks like shit at the moment, it needs a bit of TLC to get it to the point where I'm happy with it. That Uras Mk2 in your avatar is pretty dope though, I'd personally get one of those just to stand out from all the Magna crew (Chasers)

[millzy_88]

Hey. Magna's are cool.

[1JZNOSHIT]

haha i kid, im thinkin bout gettin one of my own, n lookin at ur avater, thats pretty much what i wanna run, on the same rims too. either them or gt-c's..

If you buy a JZX100, I have the wheels for you.

18x9 +32 235/40
18x10 +29 245/40

Work Meister S1 3pc in black with polished lip.

Im always up for new wheels, so may be willing to part if you are keen :)

[Halle Terry]

^^ Changing up your rims Deluca?

[1JZNOSHIT]

^^ Changing up your rims Deluca?

always keen on a rim change :)

[Halle Terry]

Go 20's Uleh

http://i288.photobucket.com/albums/ll175/JZX-100/29102009001.jpg

I'll get mass flamed for it, but I kind of like it.

[1JZNOSHIT]

are they XD9s?? they would be a fork out!!

[Halle Terry]

GT-7's I think. 20x9.5 +8 keke

[1JZNOSHIT]

LOL @ +8

[Halle Terry]

http://fatlace.com/hellaflush/wp-content/uploads/2010/05/TE8.jpg

So insanely keen for 18x9.5 +12's

[jaybee]

te's are so timeless, who cares if every pingpingpingping has them

ps. im stealing that pic of the black 100 with black te's.

[Stef]

mmm very nice evo, time attack styles.

deluca, funny u say that, i was thinkin to my self on my daily train ride to work (no license, get it back in a week) wonder what a matte black chaser would look like with black meisters..

course opinion is one sided, you own one! ive seen some pretty decent priced ones, yes auto but its easier in this sydney traffic.

[Milhouse]

wanna test fit my wheels deluca ? :D

[AGIT8D]

wow that evo is HOT AS FUCK! i'm so sick of te's, they literally bore me, but that looks amazing

[Milhouse]

funny to think that the photo is almost 6 years old too haha

Thats the founder of the hellaflush websites evo when putting stupid offset wheels on cars in the usa was unheard of.

[Halle Terry]

Update:

Sold the polished Meisters, bought some white ones.

18x9 +20 (effective +15 with slip on)
18x10 +20

Ikeya Forumla solid diff collars.
Dixcel Type PD slotted front and rear rotors.
Project Mu B-spec pads.
CARBON FIBRE FUCKING COILPACK COVER!
Defect Notice

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs517.ash1/30460_404277908701_585903701_4394529_6710116_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs106.snc4/35661_406335608701_585903701_4447838_3598406_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs057.ash2/36227_404653568701_585903701_4406082_4761471_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs558.ash1/32508_402502418701_585903701_4345246_820470_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs618.snc3/32508_402502368701_585903701_4345238_1149646_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs072.snc4/34982_411398848701_585903701_4566957_4752727_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs052.snc4/34982_411398853701_585903701_4566958_2048583_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs052.snc4/34982_411398863701_585903701_4566960_7780055_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs022.ash2/34450_411398868701_585903701_4566961_5146051_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs184.snc4/37518_411399243701_585903701_4566964_4385801_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs517.ash1/30460_404277913701_585903701_4394530_5004390_n.jpg

[Slip_]

Coilpack cover!!

!!!

[Halle Terry]

Coilpack cover!!

!!!

I know bulk pingpingpingpings are jealous about that bad boy!

[Rhys]

thought this had white rims on it when i was driving next to you on leach the other nite, bombed looking car. Miss my old JZX's

[1JZNOSHIT]

where did u find the carbon love? thats dardy sing.

[Halle Terry]

thought this had white rims on it when i was driving next to you on leach the other nite, bombed looking car. Miss my old JZX's

Does yo! Thanks man, always good to know people like it :)


where did u find the carbon love? thats dardy sing.

Yahoo auctions, got it for like $40 or something.

[Lonewolf]

what was the yellow for?

[Ben Wha]

His shit hairstyle and gay diamontie earrings.

[Halle Terry]

what was the yellow for?

1x rear bulb was out
Smashed side indicator
And strangely enough, the stockies I was driving on. I told them they weren't mine, and when they asked where my wheels were, I pointed to the Meisters sitting in the back seat, alas not good enough and got pinged.


His shit hairstyle and gay diamontie earrings.

Kek! fair call play on.

[jaybee]

i quite like the defect notice, it matches with your oil dipstick.

[TJ]

His shit hairstyle and gay diamontie earrings.

(Y)

[c.rusli]

cant go wrong with dixcel! ;) loves ur rims mate!

[Halle Terry]

Thanks man :)

Also been considering this front lip and an S2 bar:

http://img309.auctions.yahoo.co.jp/users/3/7/4/1/yasukarou-img600x300-1219492625qvjujk69633.jpg

[Halle Terry]

This is a video of the exhaust setup my car is likely to run (for the time being)

Cat back + Reinhard pipes with no silencers and no baffles.

http://s375.photobucket.com/albums/oo193/fasekelly/?action=view&current=MOV00752.flv

[jaybee]

sounds like a sr on idle :)

[Halle Terry]

$180 Blitz/Trust mutant intercooler.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs184.ash2/44748_426037673701_585903701_4937693_6822513_n.jpg

Oh noes a leak!

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs398.snc4/46154_426037508701_585903701_4937691_6465221_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs274.snc4/40052_426037588701_585903701_4937692_7460935_n.jpg

All sweet now.

TRD underbrace, made a big difference to front end responsiveness.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs314.ash2/59419_432801248701_585903701_5091250_5132317_n.jpg

Front brake setup.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs634.snc4/59419_432801238701_585903701_5091248_8173443_n.jpg


http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs320.snc4/41350_424543303701_585903701_4894864_6779469_n.jpg

Then I lowered it about 8 fucking centimetres.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs340.ash2/62069_433619933701_585903701_5108633_3111704_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs633.snc4/59346_433579718701_585903701_5107616_6381778_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs707.snc4/62766_433626023701_585903701_5108741_5497666_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs651.snc4/61106_433625478701_585903701_5108738_4242437_n.jpg

[R3N]

i don't see any hanging baskets?

[Risk10k]

Needs more low.

[Jimmy_S]

Yeah Bombed!!! :D

[mxracer]

serious duct tape cooler joiner repair !

dodgey , jzx has more class than that spend $20 at super cheap and buy a new silicon joiner

[S15_NUT]

^or Autopro......
Looks good tho, when you wash it!

[Mofo]

wheels are sick. is that last photo with spacers on front and back?

[Halle Terry]

5mm on the front making effective +15, when I get new tyres might go like 15mm spacers making +5.

Hopefully going to take it to drift prac sometime before the end of the year, but on $200 a week progress is slow haha.

[TJ]

Wash the fucking thing.

[Halle Terry]

I could, but I probably won't.

[Marti]

Hot looking chaser

[c.rusli]

duct tape fix 101... lol!

looking good after being dumped! needs a bit more!

[mxracer]

lets see how long duct tape lasts with 50 plus deg intake temps and 15 psi plus of boost running throu it. ( its before the cooler so its going to be hot air running throu there !)

its like putting duct tape on a flat tire repair

other than that , car is balling !

[Milhouse]

LOL @ Rideheight

You've taken hardparker to a new level.

[SEXUAL TYRANNOSAURUS]

telly... clean it so i can shoot it!

[Milhouse]

with a gun ?

[SEXUAL TYRANNOSAURUS]

no i wanna bust a nut on it when its freshly cleaned!

I would offer you the same, Owain... But im afraid your offset Vs. ride height doesn't get me aroused!

[Daisy]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs633.snc4/59346_433579718701_585903701_5107616_6381778_n.jpg


nice of kye to lend a hand putting your rims on, timid finger prints.

[Skitzo]

Needs a detail, a wash will do fuck all.

[Ben Wha]

Needs a respray, biggest bucket of shit.

[Halle Terry]

lets see how long duct tape lasts with 50 plus deg intake temps and 15 psi plus of boost running throu it. ( its before the cooler so its going to be hot air running throu there !)

its like putting duct tape on a flat tire repair

other than that , car is balling !

Hahah it's after the cooler, I found it pretty funny, when it pops I'll fix it up with something proper.


duct tape fix 101... lol!

looking good after being dumped! needs a bit more!

Hahah I could go lower but the chassis is 9cm off the ground and the exhaust is about 5cm.


LOL @ Rideheight

You've taken hardparker to a new level.

Hahah sif pingpingpingping I treat her with lots of clutch kicking love.


telly... clean it so i can shoot it!

I'll consider it Corby poo ;)


Needs a respray, biggest bucket of shit.

Lol says the 4 door 32 driver.

[Milhouse]

no i wanna bust a nut on it when its freshly cleaned!

I would offer you the same, Owain... But im afraid your offset Vs. ride height doesn't get me aroused!

lol fuuuuuu !

Ill get some photos this arvo of the car in its current state.

[mxracer]

Correct me if I'm wrong but ain't that the drivers side?? Thus hot air comes from turbo down the pipe of dodge to the cooler gets cooler and to the throttle body. U must be a ex rb owner turbos are on drivers side with toyotas. Eg hot side is drivers side

[Halle Terry]

No Marty you are right, it is the hot side.

I probably should listen to you considering you know far more about 1J's and JZ's than I do haha.

[Skitzo]

Marty, i think its more cause he is asian.

[Milhouse]

Thread needs moar aussie bikini and flag draped over it...

[Halle Terry]

Contemplating raising car slightly and getting lower offset wheels. Maybe 9 +5 on front and 10 +15 on rear.

OR

Square setup, ie 9.5 +12 all around or something along those lines, that way I can run same tyres all around and rotate.

Thoughts?

[Mofo]

I was gonna say before that you can see the fitment on the rear is heaps better then the front, and you said thats WITH 5mm spacers on the front, so it obviously doesnt like FR width and offsets, must like F4 fitment or GTR fitment.

The width and offset you have is highly sought after with Z20 soarers and A70 supra's, you wouldnt have a problem selling them, if they were SSR SP1's id buy them in a heartbeat. I already have a set but they are 18x9 +24 & 18x10 +37 and i dont like the rear fitment, +20 would be sick.

So yeah if youre still feeling adventurous go the 9.5 +12 all round. XD9's would be hot.

[1JZNOSHIT]

before you go that wild (9.5" +12), wait to see how my 9.5" +22s sit at the front :)

[Halle Terry]

9.5 +22 is 1mm less then my current fronts Deluca, so keen to go aggressive and run 9.5 +12 all around, as that's the same as the rears.

The problem is though, I can't find anything I like! I'm sick of all the same wheels on everyones cars, a set of Veilsides would be awesome but rare as fuck to find.

Suggestions?

[Alt_F4]

Suggestions?
Buy mine :)

[jaybee]

i think leave it man, its looking tough as atm!

[Jase]

Looks good man, think i seen this doing the rounds


..Id get new silicon joiner but haha. Go to Purple Pig in welshpool, or engine protection in mayaree (theyre cheaper.. but mite only do full 3 foot lenghts..?) and get some purosil hose, dont bother with that cheap imported crap at the most auto stores, so shit

[Mofo]

hoseco on kewdale rd sell top quality silicone hoses in almost any size and cut it to any length you want, doesnt matter how small. Ive been going to them for years as they always have good quality shit in stock...

[1JZNOSHIT]

9.5 +22 is 1mm less then my current fronts Deluca, so keen to go aggressive and run 9.5 +12 all around, as that's the same as the rears.

The problem is though, I can't find anything I like! I'm sick of all the same wheels on everyones cars, a set of Veilsides would be awesome but rare as fuck to find.

Suggestions?

furry muff.

finding a Jap rim that not many people have in a solid offset that isnt too expensive is rather hard!

[Milhouse]

http://failblog.wordpress.com/files/2009/05/fail-owned-hubcap-fail.jpg

Telly wants these in 18x9.5 +12.

[Fukushima]

'baller' ahahaha

[Halle Terry]

Many thanks to Corbin for this!

http://hphotos-snc4.fbcdn.net/hs596.snc4/57375_451515378701_585903701_5441855_6175876_o.jpg

http://hphotos-snc4.fbcdn.net/hs481.snc4/51851_451515468701_585903701_5441856_7970592_o.jpg

http://hphotos-ash2.fbcdn.net/hs295.ash2/57201_451515313701_585903701_5441854_4047852_o.jpg

http://hphotos-snc4.fbcdn.net/hs501.snc4/51793_451515573701_585903701_5441858_7281905_o.jpg

http://hphotos-snc4.fbcdn.net/hs580.snc4/55761_451515668701_585903701_5441859_7707470_o.jpg

http://hphotos-ash2.fbcdn.net/hs248.ash2/52546_451515723701_585903701_5441860_2429169_o.jpg

http://hphotos-ash2.fbcdn.net/hs275.ash2/55274_451515818701_585903701_5441862_1850698_o.jpg

[mitchy]

Deluca has some nice black pursuit rims in those photos.
looks good... need to sort out your front though telly, the mexican is missing!

[Halle Terry]

Yeah I know man :( front's need another 10mm. Bolt on's for the front would be great!

Alas, time to change wheels me thinks.

[mitchy]

18x10 -7
18x11 -12
:D
http://i339.photobucket.com/albums/n456/geoff240sx/DSC07143.jpg

[Halle Terry]

Fronts I could actually run, but the rears would require some fairly aggressive work to the guards.

[mitchy]

lol... mad pingpingpingping.

[Milhouse]

lol time to don a sombrero and drink corona you mexican.

i tried -12 9.5 on the front of my r33 with 225's stretched and it looked stupid :)

[Halle Terry]

Well they would stick out like 25mm on current camber, with a change of camber and a flare could bring them to like, 10-5mm maybe?

Rears are 45mm more then my current setup haha, would be a little crazy trying to get those to fit.

Ideally new set will be like 9.5 +12 all around, maybe run a 5mm all around or something.

[Milhouse]

Exactly the same as my setup then.

Ive still got plenty of room in the guards haha

[Halle Terry]

Remind me to swing around and try them out, real keen to see how they look!

[Sfidz]

thought these may interest you....

http://www.nissansilvia.com/forums/index.php?showtopic=465994

[Halle Terry]

They're nice but not what I'm after. I'm fairly keen on AME Schrifts now.

Need some more bling-blang on my car

http://www.upgarage.com/upgarage/gazou/0906/0906131/0906131001773/0906131001773s0.jpg

[Ben Wha]

Nice Commodore rims, man.

[R3N]

speedy wheels have something similar, hit up tempetyres mang

[jaybee]

There is an option to delete your post terry, make use of this feature!

[Halle Terry]

Hahaha sif nigga, I set trends!

[Tocchi]

losing to Peter Pan is a trend?

not a fan of those man.

[Halle Terry]

http://2.bp.blogspot.com/_P88NPZIxy7A/TK8WjtXOSoI/AAAAAAAAAZQ/0prtWw_bAvk/s320/DSC_0696.jpg

[Tocchi]

Ok I rate them a tad more now!

[1JZNOSHIT]

http://www.skylinesaustralia.com/forums/19-Work-Schwert-Sc2-t342571.html

[Daisy]

http://2.bp.blogspot.com/_P88NPZIxy7A/TK8WjtXOSoI/AAAAAAAAAZQ/0prtWw_bAvk/s320/DSC_0696.jpg

bob jane release a new catalouge?

same same??
http://www.bobjane.com.au/images/wheelsets/Graphite-%20gm%20mach.gif
http://www.bobjane.com.au/images/wheelsets/Victory-%20silver.gif

[jaybee]

they look good there because of the ride height and fitment!

[Halle Terry]

http://www.nissansilvia.com/forums/index.php?showtopic=465740&st=0&p=5976771&fromsearch=1&#entry5976771

Possible. Those would be a great set of wheels to mismatch with!

Would have
4x 18x9 +20
4x 18x10 +20

[SEXUAL TYRANNOSAURUS]

Best part of your car...

http://farm2.static.flickr.com/1062/5135778374_0cce40920f_b.jpg

[mitchy]

your choice in rims is on a downward spiral telly tubby, there is plenty of nice looking VIP rims out there.

Work Varianza T1S

http://cornerbalance.files.wordpress.com/2009/04/t1s.jpg

http://cornerbalance.files.wordpress.com/2009/04/3264599013_e72ca9ba0b_o.jpg

http://img689.imageshack.us/img689/3820/1234896349.jpg

[SEXUAL TYRANNOSAURUS]

Get them in black and i will personally pay mitchy to blow you!

[mitchy]

black with a stepped lip, and i'll do it for free!

[jaybee]

i'd pay to watch.




i would.

[R3N]

black with a stepped lip, and i'll do it for free!

i passed up on this, and have been regretting it ever since

[Halle Terry]

http://nissansilvia.com/forums/index.php?showtopic=465302

Mate's selling these at the moment.

[AGIT8D]

18s too small for VIP.

19/20 and way up in the guard.

[Halle Terry]

I'll stay 18's as I want to dori the car, the red centre Varianza's might be a goer simply because they're stupid and silly haha.

[Milhouse]

step upto 19's

you have more than enough cash to warrant it !

[Halle Terry]

Hahaha are you drunk dude?

I can quite confidently say I'm practically the poorest person on this forum.

[Tocchi]

ill sell you cheap cheap 245/40/R19s if you buy 19" rims !

[Stef]

Hahaha are you drunk dude?

I can quite confidently say I'm practically the poorest person on this forum.


least you got a worthy car! pretty sure im poorer, dont even have one haha.

red wheels, yes.

[jaybee]

Hahaha are you drunk dude?

I can quite confidently say I'm practically the poorest person on this forum.


We first moved to Dubai in 1990, left in 1994 and frequent it due to excess money, goto spend it someway right? Place was honestly better back then, now it's a huge shopping mall full of superficial shit and i go on huge shopping sprees but still manage to never run out of coin.

you, keuk....same same.

[RaGH*]

Agreed..

Me: what you getting as a first car?
Telly: I love Fcs and I've only got like 11k to spend
Me: get a fc they're wicked
Telly: hey man I just bought a chaser over east

... You have like Asian money growing trees or something

[R3N]

fuck u jb! i AM actually poor, not pretend poor like terry. my car doesn't even run right!

[1JZNOSHIT]

I'll stay 18's as I want to dori the car, the red centre Varianza's might be a goer simply because they're stupid and silly haha.

i will cut you a real good deal on the TE37s :)

[Halle Terry]

Agreed..

Me: what you getting as a first car?
Telly: I love Fcs and I've only got like 11k to spend
Me: get a fc they're wicked
Telly: hey man I just bought a chaser over east

... You have like Asian money growing trees or something

Realistically, the Chaser paid off long term haha, by now I would of broken everything on the FC. That said, I do owe a substantial amount on the car still.


fuck u jb! i AM actually poor, not pretend poor like terry. my car doesn't even run right!

Lol Nissans.


i will cut you a real good deal on the TE37s :)

Tempting but no dice, 18's are the go!

[TJ]

your choice in rims is on a downward spiral telly tubby, there is plenty of nice looking VIP rims out there.

Work Varianza T1S

http://cornerbalance.files.wordpress.com/2009/04/t1s.jpg

http://cornerbalance.files.wordpress.com/2009/04/3264599013_e72ca9ba0b_o.jpg

http://img689.imageshack.us/img689/3820/1234896349.jpg

Win in black!

[Halle Terry]

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs767.snc4/66771_472356963701_585903701_5744779_5903940_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1225.snc4/155792_476678743701_585903701_5807989_8160915_n.jp g

http://i71.photobucket.com/albums/i152/DriftR86/1291678623.jpg

<iframe title="YouTube video player" class="youtube-player" type="text/html" width="640" height="390" src="http://www.youtube.com/embed/IUH3JQjcweM" frameborder="0"></iframe>

[hako]

Diff details/cost ?

[azzada1]

seen this afew weeks back near garden city, looks mint

[Halle Terry]

Cusco RS 2-way, about 5000km's on it, $750 USD, ended up about $1100 by the time I organized shipping.

I want a 4.11 crown and pinion for it, so I can use 3rd, hopefully by January I'll have it at AHG/Barbs finally getting it sideways, sans curbs naturally.

[Halle Terry]

seen this afew weeks back near garden city, looks mint

Thanks man, pity the Police don't think so haha.

[azzada1]

yeah i noticed the sticker... has a nice stance bro, jealous

[anton]

Cusco RS 2-way, about 5000km's on it, $750 USD, ended up about $1100 by the time I organized shipping.

I want a 4.11 crown and pinion for it, so I can use 3rd, hopefully by January I'll have it at AHG/Barbs finally getting it sideways, sans curbs naturally.

so jealous right now.. least you got the right diff

[R3N]

how's the oil leak?

[Halle Terry]

Still leaky haha.

Pulling the box out (again) very soon to hopefully get this saga over and done with.

[R3N]

3rd time's the charm eh? when's yellow expire? need a hand with anything?

[Halle Terry]

10th of Jan, I think I've already recruited a few people, but will let you know if I'm short of hands.

Will try and access a hoist so no fucking around on the ground hahaha.

[Halle Terry]

Full TRD bush set front and rear.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/179695_500436383701_585903701_6176207_4681662_n.jp g

Goodies waiting to go in once I sort this sticker out.

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/179843_500455608701_585903701_6176349_8268145_n.jp g

And the last time you'll see her on white wheels.

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash1/167126_10150093562958702_585903701_6266598_1314920 _n.jpg

[jaybee]

details on rims please.

[Halle Terry]

17x8.5 +25 all around.

[VRX]

Reinhard exhaust?

[regi]

17x8.5 +25 all around.

:/

[ben351]

where do you plan on installing the Coffee Chill ?

[jaybee]

17x8.5 +25 all around.

yes!!

[Halle Terry]

I won't because it's a shit drink.

Getting some custom cup holders made up to suit Lipton ice tea.

[reNEGade]

Full TRD bush set front and rear.
And the last time you'll see her on white wheels.

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash1/167126_10150093562958702_585903701_6266598_1314920 _n.jpg

Still running white wheels....
When you going to slide it?

[ovaxitd]

still got the rims and he still needs to learn the sliding part...

[Fukushima]

And it's the 5th month of the year so he is due for another yellow

[JBAE]

Still running white wheels....
When you going to slide it?

when all box curbs are removed from public roads!

[Halle Terry]

^ Worst friends.

No idea to be honest, right now I'm currently surviving on like $100 a week, so hardly any money to get my diff assembled :(

[Halle Terry]

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/249584_10150209147498702_585903701_7183473_3465121 _n.jpg

Cusco sways + unknown jap tie rods.

[Halle Terry]

3.5" Stillway titanium exhaust.

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/260307_10150213473583702_585903701_7229871_2470285 _n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/251779_10150213475053702_585903701_7229877_3276755 _n.jpgp

[mitchy]

glutton for punishment, lol.

should sound hard though!

[Halle Terry]

Yeah might need to sort out an ECV to make it a bit quieter :(

[Risk10k]

A bigger turbo will quieten things down a little :)

[mitchy]

i would if i were you... owain has been pretty lucky with his wheels and relatively quiet car.
at least if you can change it if you see cops, you are lowering the sticker-ish-ness...

[Halle Terry]

Really? Owains car's noisy from memory.

I'm honestly going to start using public transport more often, I'm currently burning through a lot of money via driving to work and to uni all the time. This will hopefully be an incentive to start doing so.

[mitchy]

he has the silencers in the reinhard system i think... before that it was pretty sedate.

maybe it's just cause they are too scared theyll cop a flogging if they pull him up. *shrug*

[jaybee]

to make it a bit quieter :(

wut.



I'm honestly going to start using public transport more often

Good idea.



































http://img808.imageshack.us/img808/7514/22681210150176318764637.jpg

[Miggy]

titanium nice!

[R3N]

he has the silencers in the reinhard system i think... before that it was pretty sedate.

maybe it's just cause they are too scared theyll cop a flogging if they pull him up. *shrug*

That's cause he doesn't do any more than 20km/h

[Kaido]

^ Worst friends.

No idea to be honest, right now I'm currently surviving on like $100 a week, so hardly any money to get my diff assembled :(

lol i like this post then follow by your next 2 post of you buying stuff

[Halle Terry]

lol i like this post then follow buy your next 2 post of you buying stuff

The price of the sways and exhaust were very cheap for what they'd normally sell for. I put myself in the red financially getting hold of these but I couldn't resist.

[Yakky Bear]

is there really a need to scar peoples lives with that pic?

i'm surprised your mouse cursor didn't get stolen when you right clicked on it.

[Milhouse]

That's cause he doesn't do any more than 20km/h

shit joke is shit.

[joshg123]

lol if me + previous owner can drive owains car around for a day, with no bonnet, 1 guard, no front bar, and not cop a sticker owain hasnt got a trouble in the world

Toyotas lookin good however, liking the titanium

[Halle Terry]

Yeah the pictures don't do it justice, I'll get a video of how it sounds when it's fitted tomorrow (fingers crossed)

[AGIT8D]

This will hopefully be an incentive to start doing so.

Hahahahahaha I love this part! Making your street car so obnoxious and menacing that you don't want to drive it FTW! :D

[Skitzo]

IS the cannon titanium as well? If not, then replace it with reinhard pipes.

[Halle Terry]

Good point, the flanges aren't, the resonator isn't, chances are the actual cannon itself isn't.

For all I can definitely tell is that the pipe-work is all titanium with delicious lobster welds.

[millzy_88]

Dam near impossible to weld titanium to anything other than titanium so be careful if your going to start mixing it up.

[R3N]

shit joke is shit.

Whoaa... calm down Dre

[Halle Terry]

http://farm7.static.flickr.com/6011/5921508937_fc778f7f29_b.jpg

Courtesy of Mr Hurst :)

Gave the car a detail over the weekend, can't believe the difference it made! The paint really is far better then I gave it credit for. I hit up a few spots with some touch up paint as well, overall the car looks massively better then it used to.

[TJ]

How many hours did he shop it to look clean ?

[Halle Terry]

Probably about the same time it took me to tighten that exhaust bolt for you.

[Ben Wha]

Shit just got real.

Why didn't Corbin take a photo of the other side? :P

[SEXUAL TYRANNOSAURUS]

Shit just got real.

Why didn't Corbin take a photo of the other side? :P

couldn't move the car... flat battery :P

[JBAE]

lol and you at one stage wanted to go from this to a POS styled A70...

[1JZVL]

looks super white!

Love it, can't say I've seen a photo like that for a Chaser :)

....I know it's sad that you're selling this car eventually, but, sell me that rear wing!!! :D

[Halle Terry]

Haha might do so Ben, if I can figure out how to remove the Sikaflex I'll sell it to you :)

[JBAE]

Haha might do so Ben, if I can figure out how to remove the Sikaflex I'll sell it to you :)

maybe saw it of with some braided fishing line? cant imagine itd hurt the paint seeing as the sika would be weakest point.... and i dont think sika reacts to heat ie/softens ??? could be wrong

[Tocchi]

lol and you at one stage wanted to go from this to a POS styled A70...

This!!!


Keep the car :)

[JBAE]

Keep car and save harder for DUKE... IMO cant ride bike all year round!

[SEXUAL TYRANNOSAURUS]

http://farm7.static.flickr.com/6004/5925347138_f2c87076cf_b.jpg

[AGIT8D]

Fuck yeah no yellow sticker anymore!

[viet_boi]

Fucken NEAT!

[SEXUAL TYRANNOSAURUS]

When Terry hit me up to take some shots of his car, i said i would under one condition. It be clean. Now, when i said this i only meant i decent wash!

In person, this was clean as fuck. It looked like a whole different car on the road.

Will post some more pics later :)

[1JZVL]

F*cking brilliant photo.

Actually.......It has no more yellow(?) and is clean as hell.

Keep it this way and you might not get stickered? ;) = practical = keep car?

:D

[Ben Wha]

Kind of keen for pics of mine now Corbs. I changed my mind!

[AGIT8D]

Yellow is shopped out btw.. This is still too bad ass to comply with the rules and regs! :D

[Skitzo]

Want pics of my camry aswell, but may not be ready aesthetically before you leave perth. FFFFUUUUUUU!!!!!!!

[SEXUAL TYRANNOSAURUS]

Kind of keen for pics of mine now Corbs. I changed my mind!

Mostauche, Scarf and a Tricylcle and we'll make it happen!


Want pics of my camry aswell, but may not be ready aesthetically before you leave perth. FFFFUUUUUUU!!!!!!!

You got 6 weeks before I leave. Hustle!

[ED40]

Car looks fucken A. Perfect rims, stance, colour.

[Slip_]

^ +1

She 'ard. wellard.