WRCjosh
03-12-2009, 10:55 AM
Ok, i thought i better put this up as an option in case the car doesnt sell... however, im not interested in parting it out until i am gaurunteed the majority of the parts will be sold, as i cant afford to end up lumped with bits and pieces...
So here is a break down of whats available, if your interested in something, send me a PM and we can work from there.
Genuine LW5 MX7 plated harlequin shell, calais series 2 cream trim, no headliner with series 2 blue seats. Shaved door locks, smoothed and filled engine bay painted in gloss black. 100% flawless and immaculate. Comes with 9inch rear end with shortened 31 spline billet axles. No front brakes.
$8000
http://i24.photobucket.com/albums/c44/WRCjosh/tasklj.jpg
Harrop/HSV front and rear 4pot brakes
DBA5000 series 2 piece rotors (never driven on)
braided lines
VT front hub conversion for VL
$5000
http://i24.photobucket.com/albums/c44/WRCjosh/IMG_0084.jpg
T04Z (polished), 3inch intake pipe, 6boost manifold, tial wastegate (can sell with full 3.5inch custom made exhaust and dump pipe heat wrapped)
$4500
http://i24.photobucket.com/albums/c44/WRCjosh/sanders3.jpg
Rajab inlet plenum with XF throttle body (all polished)
$1000
Rajab front mount intercooler with custom polished piping to suit hi-mount
$600
Rajab stage 3/9sec spec motor, ross forged pistons, custom hbeam forged rods, stage 3 custom grind cam, built head, all blueprinted the works (msg for more details)
Long motor (no exhaust or intake sides) - $6000
Full motor (exhaust and intake with front mount and piping) - $10,000
Microtech LTX12s with 6bosch coilpacks and handcontroller
$1500
Simmons FR19x8 front and x9 rear, charcoal - $5,500
Gauges, autometer cobalt in custom pod and monster tach
$500
http://i24.photobucket.com/albums/c44/WRCjosh/photo-6.jpg
Fuel system (2x044s, 10L surge tank, billet fuel rail, 880cc injectors and 1000hp magnafuel reg)
$1000
Anything else i might have missed, hit me with a question if your interested in it and we can work something out...
All items located in perth, shipping is fine at buyers expense.
Josh - 0420908836 josh@sixfour.com.au
So here is a break down of whats available, if your interested in something, send me a PM and we can work from there.
Genuine LW5 MX7 plated harlequin shell, calais series 2 cream trim, no headliner with series 2 blue seats. Shaved door locks, smoothed and filled engine bay painted in gloss black. 100% flawless and immaculate. Comes with 9inch rear end with shortened 31 spline billet axles. No front brakes.
$8000
http://i24.photobucket.com/albums/c44/WRCjosh/tasklj.jpg
Harrop/HSV front and rear 4pot brakes
DBA5000 series 2 piece rotors (never driven on)
braided lines
VT front hub conversion for VL
$5000
http://i24.photobucket.com/albums/c44/WRCjosh/IMG_0084.jpg
T04Z (polished), 3inch intake pipe, 6boost manifold, tial wastegate (can sell with full 3.5inch custom made exhaust and dump pipe heat wrapped)
$4500
http://i24.photobucket.com/albums/c44/WRCjosh/sanders3.jpg
Rajab inlet plenum with XF throttle body (all polished)
$1000
Rajab front mount intercooler with custom polished piping to suit hi-mount
$600
Rajab stage 3/9sec spec motor, ross forged pistons, custom hbeam forged rods, stage 3 custom grind cam, built head, all blueprinted the works (msg for more details)
Long motor (no exhaust or intake sides) - $6000
Full motor (exhaust and intake with front mount and piping) - $10,000
Microtech LTX12s with 6bosch coilpacks and handcontroller
$1500
Simmons FR19x8 front and x9 rear, charcoal - $5,500
Gauges, autometer cobalt in custom pod and monster tach
$500
http://i24.photobucket.com/albums/c44/WRCjosh/photo-6.jpg
Fuel system (2x044s, 10L surge tank, billet fuel rail, 880cc injectors and 1000hp magnafuel reg)
$1000
Anything else i might have missed, hit me with a question if your interested in it and we can work something out...
All items located in perth, shipping is fine at buyers expense.
Josh - 0420908836 josh@sixfour.com.au