Semi slicks dealer Perth

[HIKARI]

Hi guys, went to waw just then, can't get the car hook at all on 1st and 2nd + my 60ft time isn't looking happy. Before I start ringin around tyre shops (which would mean rip off), anyone know a reseller/dealer for nitto or federal semi slicks in perth or australia?

Looking for size 195/50/R15 2 Pieces to fit stocker rims

Using maxxis ma-v1 hard street tyres on fwd is no good at drags at all....

[Lump]

what times did you get?

[Lonewolf]

you dont want semi slicks, you want drag radials
M/T or Bfgoodrich have drag radials, or tech9 can possibly get you nitto drag radials.

[p_streaks]

And approx prices? I need a set too.. My time no good

[Brockas]

Talk to Scotty at Tech9Tyres.

He can help you out with drag radials.

The hard sidewall of semi-slicks wont improve your time in a straight line, only around a track.

[H1GHROLLR]

+1 for nitto drag radials from scotty and tech 9 tyres

[HIKARI]

what times did you get?

hahahahahahahahahahhahahahahahhaha

14.45sec
103.32mph
60' - 2.621

If I can hook 1st and 2nd, probs get those 60ft times to 2.2. Funny how, those mph should get me to just above mid 13's

[Spektor]

you dont want semi slicks, you want drag radials
M/T or Bfgoodrich have drag radials, or tech9 can possibly get you nitto drag radials.
+1

[DR1FT3N]

Any ideas on prices guys? im in the same boat, shocking 60ft"s also whats people thoughts on hoosier? just seem to notice lots of people use them :) sorry for thread hijack

[HIKARI]

No worries,

Called many tyre shops today, nobody sells drag radials (not semi slicks). Tech9tyres still need to come back to me with some nittos 555.

So far I found out that M/T drag radials are $412each from A1 hi performance which is a bit of a wow. I'm leaning towards BFG g-force T/A from tirerack.com for $131USD (225/50R15) each but god knows how much shipping is.

[Lonewolf]

think rocket industries are the aussie distro for M/T, might be worth a try for a better price.
Pulsar guys have been down to 2.0 60's with n/a motors which isnt too bad.

[Tocchi]

i paid $310 each for my 26x9 R15 slicks a while back from A1.

i thought the slicks would be more/same as the ETs.. guess not

[HIKARI]

Rocket Industries:

M/T ET Street Radial (P/N: MT3750R) P205/50R15 - $264

M/T ET Street Radial (P/N: MT3752R) P235/60R15 - $390

Both off the shelf and extra $20 courier to Perth Each tire. Might go for the P205 :) :)

[AutoPro Innaloo]

Rocket Industries:

M/T ET Street Radial (P/N: MT3750R) P205/50R15 - $264

M/T ET Street Radial (P/N: MT3752R) P235/60R15 - $390

Both off the shelf and extra $20 courier to Perth Each tire. Might go for the P205 :) :)

Can do them a little bit cheaper then this. Give us a call

[Azrian]

Can do them a little bit cheaper then this. Give us a call

What can you do 17" 275 MT's for?

[ovaxitd]

after the same shit... but need 16" mt drag radials pref... on 8" rim

[Nemi]

advice to OP save money get a decent setup before you waste money to run a 13.

[HIKARI]

advice to OP save money get a decent setup before you waste money to run a 13.

Cool Story Bro!

Thanks for wise advice but I'm not bragging to be the champion or how good/shit fwd is. 13's isn't far and I know, just get the car to hook.

[HIKARI]

Can do them a little bit cheaper then this. Give us a call


Sorry if I missed, I called in but the bloke who answered doesn't know what I'm talking about. Who do I look for?

Cheers

[AutoPro Innaloo]

Go ask for steve