scotty
01-08-2009, 05:33 PM
For sale:FC Rx7 bridgeport 400+rwhp
Item Condition: mechanically brilliant, exterior ok
Price and price conditions: $14,000ono (will take offers) price dropped from $15,000
Extra Info:
Mazda RX-7 Series 4. 13B Bridgeport Turbo built by Lee Sanders
Black Series 4, with sunroof (no rust), full coilover suspension, twin 3' mandrel bent stainless steel exhaust with large mufflers. Front ventillated discs. Interior is in good condition.
About the engine: 13B Bridgeport Turbo Engine, built by Lee Sanders The engine has 3mm Hurley Seals, and has been dowelled. There is a front mount intercooler, 1600cc injectors, Bosch 700hp Fuel pump, thermo fan, oil catcher, also brand new wastegate 44mm.
Electronics: Microtech LT10S computer.
Wheels: 17" Kakimoto racing wheels ( with good amount of dish) also 16' NISMO lightweight racing wheels that can come with the car.
The car will be making over 400rwhp (prob around 420ish) as I'm getting it dynoed this week.
Coilover suspension HSD brand good quality and helps the car to handle brilliantly.
Unsure how many k's the engine has done, but it's not many I bought it with 2,500k's on the engine, and have driven it barely ever.
I bought the car unregistered and then spent about One and half or more years getting it all good and ready for the pits.
This is a quote from the original advertisement "Replacement cost for the engine alone is close to $20,000" and i believe this to be true.
The car also come with a lot of spares just to list a few:
fibreglass wide rear guards ( iwas going to wide body the car)
spare boot lid
spare gear box
spare rear assembly, including diff and rear brakes. (diff apparently has strengthened internals) unsure on how to verify this though)
spare exhaust which was used for getting over the pits, quietens it down heaps and was very useful cost 600+ to get made up.
spare softer and slightly higher suspension
few boxes of bits and pieces including those highly sought after triangle vents.
In order to get over pits I did heaps of work to the car to ensure it was up to standard, anything electrical that wasn't working was repaired by a qualified electrician, it also has some stealth heating for the front windscreen, which I'll explain further to any potential buyers.
Car sounds absolutely brilliant with the bridgey, I would love to keep it but I just can't anymore, need to get something more sensible. I was using this to get to and from work, so it is very drivable.
Pictures:
These pictures are all a bit old but car looks very similar except rims are bigger and better. I will get some more up soon.
Engine bay
http://i136.photobucket.com/albums/q193/scotty_do_/cars/Rx%207/2461954.jpg
Car with Nismo rims
http://i136.photobucket.com/albums/q193/scotty_do_/cars/Rx%207/2461966.jpg
Car with Nismo rims again
http://i136.photobucket.com/albums/q193/scotty_do_/cars/Rx%207/2462024.jpg
car currently
http://img198.imageshack.us/img198/4989/uploadpic1.jpg
http://img269.imageshack.us/img269/1654/uploadpic2.jpg
Contact Details: phone or msg 0421 398 643
Location:South Perth
Delivery & Conditions of Delivery:pick up or if over east can organise shipping for you.
Item Condition: mechanically brilliant, exterior ok
Price and price conditions: $14,000ono (will take offers) price dropped from $15,000
Extra Info:
Mazda RX-7 Series 4. 13B Bridgeport Turbo built by Lee Sanders
Black Series 4, with sunroof (no rust), full coilover suspension, twin 3' mandrel bent stainless steel exhaust with large mufflers. Front ventillated discs. Interior is in good condition.
About the engine: 13B Bridgeport Turbo Engine, built by Lee Sanders The engine has 3mm Hurley Seals, and has been dowelled. There is a front mount intercooler, 1600cc injectors, Bosch 700hp Fuel pump, thermo fan, oil catcher, also brand new wastegate 44mm.
Electronics: Microtech LT10S computer.
Wheels: 17" Kakimoto racing wheels ( with good amount of dish) also 16' NISMO lightweight racing wheels that can come with the car.
The car will be making over 400rwhp (prob around 420ish) as I'm getting it dynoed this week.
Coilover suspension HSD brand good quality and helps the car to handle brilliantly.
Unsure how many k's the engine has done, but it's not many I bought it with 2,500k's on the engine, and have driven it barely ever.
I bought the car unregistered and then spent about One and half or more years getting it all good and ready for the pits.
This is a quote from the original advertisement "Replacement cost for the engine alone is close to $20,000" and i believe this to be true.
The car also come with a lot of spares just to list a few:
fibreglass wide rear guards ( iwas going to wide body the car)
spare boot lid
spare gear box
spare rear assembly, including diff and rear brakes. (diff apparently has strengthened internals) unsure on how to verify this though)
spare exhaust which was used for getting over the pits, quietens it down heaps and was very useful cost 600+ to get made up.
spare softer and slightly higher suspension
few boxes of bits and pieces including those highly sought after triangle vents.
In order to get over pits I did heaps of work to the car to ensure it was up to standard, anything electrical that wasn't working was repaired by a qualified electrician, it also has some stealth heating for the front windscreen, which I'll explain further to any potential buyers.
Car sounds absolutely brilliant with the bridgey, I would love to keep it but I just can't anymore, need to get something more sensible. I was using this to get to and from work, so it is very drivable.
Pictures:
These pictures are all a bit old but car looks very similar except rims are bigger and better. I will get some more up soon.
Engine bay
http://i136.photobucket.com/albums/q193/scotty_do_/cars/Rx%207/2461954.jpg
Car with Nismo rims
http://i136.photobucket.com/albums/q193/scotty_do_/cars/Rx%207/2461966.jpg
Car with Nismo rims again
http://i136.photobucket.com/albums/q193/scotty_do_/cars/Rx%207/2462024.jpg
car currently
http://img198.imageshack.us/img198/4989/uploadpic1.jpg
http://img269.imageshack.us/img269/1654/uploadpic2.jpg
Contact Details: phone or msg 0421 398 643
Location:South Perth
Delivery & Conditions of Delivery:pick up or if over east can organise shipping for you.