PDA

View Full Version : Rissoles DiRty ThRashER, RB loove



Rissole
30-07-2009, 09:53 AM
Hey all
Apologize for the slackness but ive ripped this from my build thread on driftwa.

I've been around for a few yrs now watching and drewling and now finally my car is ready to Sliiiiiiiiiiiiiide.
I'll try and get some tyres together and rock up to practice nights, come and say gday names Russell.

Purchased as a stock shitbox with plans to build her up, Hyperdrive finished off all the bolt-ons and tune, here she is:

i have done the below always trying to keep it as JDM as possible smile.gif

Car: R32 Coupe
365 RWHP (can change to .82 rear housing if 400hp is wanted?)

Engine:
All bolt ons purchased below brand new (apart from 2nd hand 5000k 35R turbo)

Rb25det - Clint put this in for me couple yrs back..
highmount 6 boost manifold
Tial 44mm gate with ear bleeding screamer
custom intercooler piping, afm relocated.
Big stainless intake and K&N filter
Sard 740cc injectors
Garrett 3540 .63 rear housing - nice early boost, punches very hard, see how it goes...
Braided turbo lines
Splitfire Coilpacks
china FMIC
just jap Oil Cooler Kit + Filter Relocator
Hyperdrive dump and exhaust - Blitz Nur spec canon
Gates HD timing belt
Mount Franklin - oil catch can
Bosch 044
Turbosmart silicone hoses
Koyo radiator with stock fan


Suspension + Brakes:
new Tein superdrift 7kg front 5kg rear Coilovers
Need more suspension parts...
R33 front brake setup
URAS rear drift pads



Transmission/Driveline:
Rb25 Gearbox
unknown Clutch, ill invest in something decent when it blows
Modified Tailshaft
Hicas lockbar


Interior:
Stripped Out to metal (apart from front of car) ready for fullcage
4 x defi's + controller.
avcr
power fc + hand controller - 2nd hand
greddy electronic turbo timer / boost display.
2 x GTR seats - hv a fixed back Bride to go in with rail.

Exterior
Type M Standard Bodykit for spare
Genuine BN Sports rear and sides
Genuine URAS front bar
R32 GTR Bonnet and grill
DMAX D1 50mm front flares (may try and fit my SSR professors up front)
Ordered - DMAX rear flared guards, cover up a dent in rear quarter.
17 x 9 sparco spokies
17 x 8 nismo ugly arse rims
18 x 10 SSR Pro 3's.


Needs paint. Needs Diff. Needs rods/arms.

Goes very hard, ORSM to drive.

http://i210.photobucket.com/albums/bb71/rarsehole/IMG_1591.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_1603.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_1603.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_1604.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0701.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_1594.jpg

stumps.
30-07-2009, 10:01 AM
nice engine bong

DTM-031
30-07-2009, 11:07 AM
YoU mAdE tHe ThReAd TwIcE!

nice engine bay, lick of paint and she'd look mint.
hope to see you out on track soon!

Turbo2.6L
30-07-2009, 12:17 PM
Nice project!
Keep it up

OnParole
30-07-2009, 01:05 PM
you thinking of doing full respray like your avatar?
BURNOUT PICS please ;)

R3N
30-07-2009, 03:52 PM
nice catch can

evil1
30-07-2009, 04:18 PM
is this ja5on old car ?

Nickevox
30-07-2009, 07:05 PM
is this ja5on old car ?

looks it man, same rims n shit

thrtytwo
30-07-2009, 07:08 PM
HAHAHHA catch can :P good stuff, sounds tuff !

ED40
30-07-2009, 07:16 PM
Wish i had a drift car.
Lucky prick.

Rissole
30-07-2009, 07:48 PM
Yep jasons old car, what a shitheap it was when I bought it, done quite a bit to it since then :)

evil1
30-07-2009, 08:16 PM
hahaha thought so, i remember when he smashed a curb rear left wheel had some serious toe in

blownVL
30-07-2009, 10:04 PM
bombed catch can

DESAM8+PANIK
04-08-2009, 05:10 PM
Yeah can vouch this was your typical shitter ... you have done well mate ... just needs some paint and 19inch TE37s :)

thnk_again
04-08-2009, 07:44 PM
bet it pumps with that combo,
do you drift it? how does it go?

Gladio
04-08-2009, 09:09 PM
looks good, whats the future plans?

Rissole
05-08-2009, 09:48 AM
Yeah cheers everyone. This things mainly a track car so its going to attend some AHG days, Collie and prac nights. Ecstatic with how it drives.

Currently putting Dmax widebody on it and fitting new rims. Paint is all white now. Plan on a metallic green or blue in the future.

Professors are better than TE37's clint :)

18x10"
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0471.jpg

50mm Front D1 guards.
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0478.jpg

duste
05-08-2009, 10:21 AM
I've always wondered this...why do people with RB20/25s stick with the central-intake manifold? Is there any reason why they don't use plenums similar to those on 26s?

Roobiks
05-08-2009, 10:37 AM
I've always wondered this...why do people with RB20/25s stick with the central-intake manifold? Is there any reason why they don't use plenums similar to those on 26s?

not worth it untill you start getting into bigger numbers.

DESAM8+PANIK
05-08-2009, 03:21 PM
I've always wondered this...why do people with RB20/25s stick with the central-intake manifold? Is there any reason why they don't use plenums similar to those on 26s?

The avg price for the GReddy intake is about 1500 not including throttle ... you could go the "cheap" alternative but I have physically fitted one of those manifolds finished everything and then poured nissan coolant into it only to watch it leak through the manifold and onto the ground ie very pourous material.... I would say it would be the next step if he was going to go down that road .... plus stock mani does well till big you want big numbers.

DISTRBD
05-08-2009, 04:35 PM
Nice wheels





I've always wondered this...why do people with RB20/25s stick with the central-intake manifold? Is there any reason why they don't use plenums similar to those on 26s?

No greddy plenum for rb20s :(

Rissole
06-08-2009, 02:48 PM
Yeh what they said.
Might go .82 rear housing to get up to 400rwhp plus maybe change the plenum... but no need for now. Its ready to thrash.

Smoked
08-08-2009, 12:31 AM
nice engine bong

LOLL exactly what i thought. exaaactly.

Rissole
26-08-2009, 12:42 PM
Oh yeh, i sprayed it white. For now..
Chasing a BN front bar too, uras mixed with bn is retarded.

Just mounted this 3 litre catch can last night. No it wasnt a good root ;)

Collie drift sept 6th. Can not wait.

http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0851.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0852.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0853.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0857.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0858.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0860.jpg
http://i210.photobucket.com/albums/bb71/rarsehole/IMG_0882.jpg

evil.e30
26-08-2009, 03:38 PM
ooh nice :) like the contrast, panda style ftw :)