CHEAP CHEAP tyre repair!

[JBAE]

got a tek screw in the rear right tyre of the wrx need is fixord asap anyone know sum one who will do cheap cheap? as im redundant spec as of today lol :D

[DRKWRX]

any tire place will fix it for like 20 bucks or cheaper.

[Denver]

redundant? uh oes, what happened?

and any tyre shop will do it if its a normal centre of the tyre style pucnture, probably cost ya $20

[JBAE]

naice! ahah yeh the bhp closure shit the other day p at rockies reward essentiall meant ALL BGC mining equip is on the ground and us being in maintenance isnt good as fcuk all comes through the workshop then to be repaired so yeh being one of the cheapest(being there less than 12mths means no payout) and a trainee i got the ass got told 3.30pm this arvo but such is life have a few other things potentially lined up :D

[Denver]

BGC still has a few other sites tho, koolan island was still there i thought, or is all the koolan stuff done on site up there as its too hard to get the shit off the island?.

[Pete]

yeha repairs bout 20-30 bucks depending on where.

[JBAE]

BGC still has a few other sites tho, koolan island was still there i thought, or is all the koolan stuff done on site up there as its too hard to get the shit off the island?.

yeh got some stuff up there fuck all really not sure if its even operating atm lucky if its like 10 units or something? we were pending on another contract with them to keep us going but yeh not good at all

[evoeata]

thought atlas copco had the contract for koolan? prob just the drill side though. things are sweet here in iron ore (i work for atlas outta newman) BHP are still expanding. new hub at whaleback should be finished soon and there is a new one going out near orebody 18. shitloads of work up here if u can get in. once your in with BHP up here your laughin. try skilled or workpac if your lookin for HD fitter work. maybe even HWE. they were advertising for fitters at yandi a couple of months ago.

[JBAE]

was doing a traineeship as a service mate :( didnt even get to start tafe ohwells maybe hit uni or sumn lol

[luke20t]

buy a kit from supercheap and do it yourself.. 15 bucks and can fix 5 holes..

[JBAE]

yeh but i cant get the tec screw out lol needle nose plier drought faill my shit is at werkkk lol

[TargaHatch]

thought atlas copco had the contract for koolan? prob just the drill side though. things are sweet here in iron ore (i work for atlas outta newman) BHP are still expanding. new hub at whaleback should be finished soon and there is a new one going out near orebody 18. shitloads of work up here if u can get in. once your in with BHP up here your laughin. try skilled or workpac if your lookin for HD fitter work. maybe even HWE. they were advertising for fitters at yandi a couple of months ago.

What do you do up here dude?

I'm in Newman as well, at Whaleback(sometimes). I was dropping a transmission into a dumpy yesterday, and the westrac mechanic's(t/a's??) were a pair of africans with a skinny little white dude apprentice with them, and none of them had a clue. Had to hold their hands through the whole thing, I was just the rigger for the job, was pretty straight forward. There are still people around with job's who shouldnt have them.

[Boza]

would recommend gettin it done properly, ie a quill seal/mini combi or whatever, done from inside...cost you more than 20-30 bucks tho, more close to $40...v/w/z rated tyres meant to be done this way..

if want butcher job then bang a string plug in it like others suggest...

if nor river go see adrian at tyrepower in greenwood or his mrs at subi...

[ttomred4000]

just make sure its not in the side wall.

[Pete]

would recommend gettin it done properly, ie a quill seal/mini combi or whatever, done from inside...cost you more than 20-30 bucks tho, more close to $40...v/w/z rated tyres meant to be done this way..

if want butcher job then bang a string plug in it like others suggest...

if nor river go see adrian at tyrepower in greenwood or his mrs at subi...

mini combi + new valve stem + balance = $30.

thats what our stores do them for anyway.. You are only ever meant to do mini combi on motorbike/car tyres that go over 30 km/hour.

we use strings for graders/earthmover and tractor type shit.

[SircatmaN]

Yeh whatever you do dont get a dogshit plug. I've seen dodgey places put them in peoples tyres for like a cheap $15 cashie for there lunch and they are fucked.
I would do it for you if you could find me A. a tyre machine and B. die grinder C. mini combi and glue.

But its probably easier to goto that guy ^^^^^^ for $30 than spending $4000 on getting me tyre fitting machine :D

[evoeata]

What do you do up here dude?

I'm in Newman as well, at Whaleback(sometimes). I was dropping a transmission into a dumpy yesterday, and the westrac mechanic's(t/a's??) were a pair of africans with a skinny little white dude apprentice with them, and none of them had a clue. Had to hold their hands through the whole thing, I was just the rigger for the job, was pretty straight forward. There are still people around with job's who shouldnt have them.

drill fitter with atlas outta newman. do all the sites round here. how bhp make money at whaleback has got me fucked. biggest bunch of dog fuckers ive ever seen. insane