OptiC
16-03-2009, 08:49 PM
Yeah I'm lazy, here's a copy paste from another forum ^_^
Engine Mods:
SR20DET
Arias forged pistons
Shot peened rods
Balanced and machined crank
Honed and machined block and head with 40 Thou overbore
Tomei 270deg cams with 12.5mm lift
Crower Valve Springs
Titanium Retainers
Tomei rocker stopper kit
ACL Race Series Bearins
Garrett 3071 Turbo with .86 rear housing (4 inch inlet)
Home made steam pipe high mount exhaust mani
44mm Tial external gate
Braided turbo lines
Nismo 740cc injectors
Power Fc D-Jetro
K&N air filter
600x300 China fmic
Custom turbo back exhaust
Painted rocker cover
Profec B boost controller
Exedy 5 puck clutch with 2500lbs pressure plate
Nismo lightened fly wheel
Suspension/Brake Mods:
Apexi N1 coilovers (10-8kg springs)
Aftermarket Traction rods
Aftermarket rear camber arms
Aftermarket castor rods
Z32 front calipers with Frodo pads
25mm 4 stud bolt on spacers
Jap rear strut brace
Interior:
Fully stripped and seem welded interior (no sound deadening)
Bride drivers seat
Recaro passengers seat
Cusco full cage
HKS water temp gauge
HKS oil temp gauge
HKS oil pressure gauge
VDO boost gauge
PFC hand controller
Profec B control unit
Switch and push button start (no steering lock or key)
Drift hand brake button
HKS turbo timer
Fire extinguisher
Exterior:
Orange Paint ^_^
URAS front bar
URAS rear bar
URAS side skirts
Advan Tri spoke rims or Impal rims
400.9HP @ 23psi
298.95KW
http://doadrift.com/images/11.jpg
http://doadrift.com/images/12.jpg
http://doadrift.com/images/13.jpg
http://doadrift.com/images/14.jpg
Engine Mods:
SR20DET
Arias forged pistons
Shot peened rods
Balanced and machined crank
Honed and machined block and head with 40 Thou overbore
Tomei 270deg cams with 12.5mm lift
Crower Valve Springs
Titanium Retainers
Tomei rocker stopper kit
ACL Race Series Bearins
Garrett 3071 Turbo with .86 rear housing (4 inch inlet)
Home made steam pipe high mount exhaust mani
44mm Tial external gate
Braided turbo lines
Nismo 740cc injectors
Power Fc D-Jetro
K&N air filter
600x300 China fmic
Custom turbo back exhaust
Painted rocker cover
Profec B boost controller
Exedy 5 puck clutch with 2500lbs pressure plate
Nismo lightened fly wheel
Suspension/Brake Mods:
Apexi N1 coilovers (10-8kg springs)
Aftermarket Traction rods
Aftermarket rear camber arms
Aftermarket castor rods
Z32 front calipers with Frodo pads
25mm 4 stud bolt on spacers
Jap rear strut brace
Interior:
Fully stripped and seem welded interior (no sound deadening)
Bride drivers seat
Recaro passengers seat
Cusco full cage
HKS water temp gauge
HKS oil temp gauge
HKS oil pressure gauge
VDO boost gauge
PFC hand controller
Profec B control unit
Switch and push button start (no steering lock or key)
Drift hand brake button
HKS turbo timer
Fire extinguisher
Exterior:
Orange Paint ^_^
URAS front bar
URAS rear bar
URAS side skirts
Advan Tri spoke rims or Impal rims
400.9HP @ 23psi
298.95KW
http://doadrift.com/images/11.jpg
http://doadrift.com/images/12.jpg
http://doadrift.com/images/13.jpg
http://doadrift.com/images/14.jpg