Myy casual sileighty

[dee]

Ladies N Gents!

Been on here for quiet sometime...read alot just never really post much lol but thought id smash a small write up on my car :)

Owned the car since august06, and due to apprentice wage its been taking me forever to get there with modifications etc...BUT you'll read throughout this write up of where its come :)

This is how she looked when i first bought it and came with the following mods
HKS silent catback, HKS hipermax coils, Cusco strut braces, HKS FMIC, HKS SSQV, Nardi steering wheel, Blitz SUS pod...thats pretty much it
http://img101.imageshack.us/img101/9981/p8230009pr0.jpg (http://imageshack.us)

Then i decided to give her some fresh 2pac just @ the end of 06...
http://img292.imageshack.us/img292/6396/pc300113fj0.jpg (http://imageshack.us)

Started to get rid of what i didnt like on the car which was pretty much everything besides the pod and coilovers and strut braces, made my way to adding a new exhaust system, bolting up a new cooler and a few other bits and peices (no hoist in this household..clutch, exhaust all done under axle stands and a hydrolic jack)
http://img292.imageshack.us/img292/1308/p3050193dq1.jpg (http://imageshack.us)

By mid year i got all my body kit on, fresh new drift teks, new cooler, new bov, catch can etc.....and it was ready 2 paint!
http://img443.imageshack.us/img443/1369/ba17032yx7.jpg (http://imageshack.us)

WELL, that didnt happen, on my bday i went up someones ass...long story short, lady in front of me decided to go the yellow arrow and so did i, she decided she stop and not run it half way in the middle of the intersection. but wasn't serious damage so was back to sqaure one and decided to start on getting shit together for a s13 silvia front, my cousins a panel beater so he did most the work, but i did all the prep work, stripped the whole front end off on the car ready for him to panel the rad support...
http://img443.imageshack.us/img443/6656/dscn04321xe2.jpg (http://imageshack.us)
http://img443.imageshack.us/img443/975/dscn0454za3.jpg (http://imageshack.us)

So after hours and hours...and hours of work too it, preping my whole bodykit, sanding bog, sand bog, the re glass cracks etc...it was finished and done by early 08
http://img301.imageshack.us/img301/57/dscn0759bn8.jpg (http://imageshack.us)

Love it, drove it, dropped skids etc...till a week before my bday i have ANOTHER rear ender, was cars A B C (me being C) A cut off B leaving C damaged lol
was cut, couldnt believe it, had to fix her car (only a bout $400 for a kia rear bar lol) and had to do mine again...so had it back on the road towards to end of 08 looking pretty much the same, besides grill new front bar etc, got a few goodies on the way tints, type x lights and she looks like this till this day :)
http://img443.imageshack.us/img443/9136/pa180156wx8.jpg (http://imageshack.us)

Along with its latest additions, read on the find out the bits and peices done to it, its current mods

Cheers
D, cip, cippy daniel etc.. :)

1995 Nissan 180sx
SR20DET first owner is aus

Engine
GT3071R 56T .86
6Boost manifold
Turbosmart 45mm Progate w/screamer
Speedflow braided lines
Custom intake pipe
FMIC
Stainless steel fmic pipes
Blitz SUS pod
z32 afm
Nismo 555cc injectors
Bosch 040 fuel pump
50MM alloy radiator
Apexi radiator cap
Greddy oil cap
Gates radiator hoses
Embleton Engineering Overflow
Embleton Engineering Catch Can
SS TB exhaust (no cat or resonators)
GoGear fire proof hose protectors

Exterior
Silvia Front
Vertex side Skirts
Vertex rear Bar
Vertex front bar
Paint respray
Clear indicators
Type X Tail lights
10% Tints
Sqaure headlights
3Slat grill
Gaurds rolled by Dez @ autofx

Interior
GReddy Profec B spec II
GReddy Turbo timer
Hybrid dials
Hybrid Parker Bulbs
Ultra Blue H4s
Shinny chrome gear knob
Leather Gear boot
Alpine Head Unit iPod Ready
Pioneer Audio Splits 6"
Sony Xplode 600W Amp
12'' Sub
JJR Drift Style Steering Wheel
Apexi Boost Gauge (BAR)
24 Point Interior LED lights

Suspension & Wheels
17x8 Black Koya Drift Teks (front)
17x9 Black Koya Drift Teks (rear)
235/45/17 Federal 595 on rear
225/45/17 Federal 595 on front
HKS HyperMax Coilovers
Xtreme Heavy Duty Organic Facing Clutch
Machined Flywheel
Cusco Rear Strut brace
Cusco Front Strut brace
Cusco Rear Camber Arms
Rear Toe Rods
Whiteline Subframe Bushes (Drift Pineapples)

Made 303hp @ 20psi Allstars dyno with nistune, all parts installation and modifications were done bymyself... future mods include
HKS 264 sticks & gears
Metal headgasket & studs
FPR or bigger injectors
Black roof
Set of gauges N
Bride seats...so a few more things left to do but pretty happy with it atm! hoping to get about 360+ or as much as she can go without building the motor!

http://img27.imageshack.us/img27/6946/dscn1266sp9.jpg

http://img17.imageshack.us/img17/2328/dscn1268sw8.jpg

http://img9.imageshack.us/img9/8010/dscn1270wp8.jpg

[evil1]

bombed!
awesome you turned it from guts to glory!
easily one of the nicest sileightys out there.
and ta.

[ED40]

Very nice car mate!

[Tocchi]

very nice :)

glad you overcame all those collisions... they can be disheartening at times

[Rantopotamus]

Looks Mint!

[Evolved]

Looks clean dude good work.

Might ask what you do for a living?

[evil1]

his a sparky

[American Dave]

great work and the results speak for themselves

[Alt_F4]

Think I saw this up the road from my place, you got a mate with a white wrx with black rims?
Very tidy either way :)

EDIT: lol yeah the wrx in the 2nd pic, both very tidy rides :D

[Nickevox]

bombed

gates hard at 6k

[STEALTH]

bombed n shit cip, easily one of the best sileighties around

heard gate open the other day, and fuck me sounds nice!

[EYEH8HSV]

this is the one i saw the other nite on murray st!!! i was very much impressed..hot sil80 for sure.

[low ghia]

tip;;



DONT DRIVE ON OR NEAR YOUR BIRTHDAY..... damn you have bad luck... 2 prangs near or on 2 birthdays...


nice car, good work

[Butcher]

Ive never been a fan of silva front ends but that does look pretty hot nice work.

I noticed you haven't mentioned any Brake upgrades in that run down?
Might be an idea to avoid bending her again

[Turbo2.6L]

Very nice for a car i don't usually like the look of!
Been down the drags or round a track with it?

[Ibz]

nice car mate...

[Cake]

Beaudifool. Very tasteful build.

[TJ]

Not bad for a muppet.

Would own it in a heartbeat, and yeah it does get on gate ok!

[Drift_R32]

that thing is fukn clean aye..
very nice/tough looking Sil80

[PAGZ]

looks awsome dude, just curious though not bashing or anything is there a reson it made 303rwhp on 20psi with a gt3071? i dont no much abt sr20's but from wot ive seen they pull rather large numbers a gt30

[dee]

Thanks guys!!

Trying to leave it parked in garage near my bday lolz

For brakes, will put on some 32 calipers & rotors, just waiting on a mate!

Hasn't seen much track work...only a couple days @ barbs, dont really wana put car on the line so leaving it as a streeter

I believe stock cams are holding her back, along with these snails having an efficency boost range of about 23psi+....so hopefully will breath more and make more power with cams and a bit more boost

[PAGZ]

fair enuff, awsome car dude definatly come along way from when u 1st got it congrats

[joey89]

Yeameoknsht sil80 haha

jks car is bombed def one of cleanest around has show and go awesome street car fun to drive aswell :D

P.S tell your mate with the white dak dak his gay!

[evil1]

fuckin mop head

[SLEEKA]

good to see you didnt just bin the car each time, it turned out great.

300rwhp in a 180 is nothing to snuff at, would bake the tyres nicely :D

[VT SS]

nice spaghetti manifold lol

car looks awesome dude

[Mirz]

sexy asssss chippy mate
gone a long way from what it used to be!
great work champ

[blownVL]

u brought it from tears to fckn glory cip good work i reckon nicest cleanest sil80 going around good work.

its just a pity about the driver hahaha