Lui
30-06-2008, 11:36 PM
Have just installed a AFC Neo in the car, double checked all wiring and it is 100% correct. Everything is working fine but on the initial setup when I choose the car select menu, it is 6cyl arrow pointing diag up and on throttle setup, there is no reading. Closed throttle reads 0.1v and open throttle (foot down on accelerator pedal) reads pretty much nothing and the bar doesn't move at all, therefore the throttle setup comes up as NG (no good).
I thought maybe my TPS was faulty so I checked with consult diagnostics and it came up fine with a reading of 0.45v on closed and 5v open so it can't be that.
I have searched for a solution and have found that some people have had this problem before and have fixed it but they didn't state how they fixed it and I can't contact them to ask them.
Anyone have any idea what the problem could be?
car is a z32.
I thought maybe my TPS was faulty so I checked with consult diagnostics and it came up fine with a reading of 0.45v on closed and 5v open so it can't be that.
I have searched for a solution and have found that some people have had this problem before and have fixed it but they didn't state how they fixed it and I can't contact them to ask them.
Anyone have any idea what the problem could be?
car is a z32.