install of profec B

[Tocchi]

got a Profec B (series 1) for the EF.

all the PDF manuals ive found for this are corrupted.


the controller
http://img170.imageshack.us/img170/6695/1305081929gn0.th.jpg (http://img170.imageshack.us/my.php?image=1305081929gn0.jpg)

the motor
http://img98.imageshack.us/img98/2687/1305081930zf5.th.jpg (http://img98.imageshack.us/my.php?image=1305081930zf5.jpg)


which vacuum do i connect to the top of my wastegate (tial 44mm) ?
IN or OUT (on the motor)

and what do i do with the remaining vacuum line?

does the controller vacuum line connect up to the vacuum line that goes to the EMS8860 and boost gauge and such?
(it runs off the vacuum port on the inlet manifold)

[upgarage]

this should sort you out:

http://www.xspeed.com.au/manuals/Greddy_Profec_B_manual.pdf

[Tocchi]

yep it sure did :)

so yeh, it confirmed
- the controller vacuum line goes to the EMS vacuum line
- "OUT" goes to top port on wastegate

but "IN" goes to a fitting on the intercooler piping, between the turbo and FMIC
... is that normal???

oh and also, my lower wastegate port isnt connected to the intake manifold, mine goes from turbo (front) housing to the wastegate port

http://img263.imageshack.us/img263/3512/ebchelpro3.th.png (http://img263.imageshack.us/my.php?image=ebchelpro3.png)

[TTZ]

yep matt thats right. the wastegate just needs a boost reference and using a port on the manifold or from the compressor outlet won't matter as the controller is refernced from the manifold

[Tocchi]

yep

the IN went inline with the comp housing to wastegate line :)

and OUT went to top of wastegate


got it all connected up last night, works a treat

thanks for all the help guys :)

[TTZ]

just in time for todays tune then :)