OLSKOOL1800
06-02-2008, 09:27 PM
Item Condition: Unfinished Project
Price and price conditions: $39,950
Extra Info:
The car has been built along the lines of the US style Pro tourer cars that guys like Troy Treppanier & Chip Foose build.
Custom Designed Full Chassis ,All chassis mods and the majority of workmanship was performed by Zaggari Engineering in Adelaide.
Custom Sheet Metal Work including: Tubs, Flat Floor Pan, Trans Tunnel, Flat Firewall, Modified & Stretched Front Tyre Wells, Modified Dog Leg & Door Jams, Stretched Rear Guards.
Suspension: AVO Coil Overs All Round, Custom Double Wishbone Set Up On Front End, Modified Torana Rack & Pinion Steering, Braced Steering Column, Rod Hadfield Spindles.
Differential: Shortened & Fully Braced Ford 9 Inch, Romac Full Floater, 31 Spline Hubs, Custom Fabricated 4 Link.
Front Brakes: Series 6 RX7 Calipers, Vented Commodore Slotted Discs
Rear Brakes: Custom Falcon Combination, Vented Commodore Discs
Driveline set up for a 20B Triple Rotor mated to a Powerglide Transmission. (motor is only a dummy block with no internals and the gearbox the same)
Engine Has: Modified Sump and has been Professionally Mounted.
Transmission Has: Deep Alloy Sump, Al’s Race Glides T6 Heat Treated Alloy Bell Housing.
Front Wheels: 18 x 7 FR Simmons on 215 / 30 / 18 Falken Tyres
Rear Wheels: 18 x 12 FR Simmons on 335 / 30 / 18 Pirelli P – Zero Tyres
New Parts: 12A Nosecone (STEEL) "NOS", Savanna Lower Lip (STEEL)"NOS", Headlight Surrounds "NOS", Savanna Grill "NOS", Chrome Strip(S/H but mint & eyebrows ("NOS"), Savanna Indicator Lenses "NOS".
Also Included: Savanna Hex Tail Lights (immaculate condition) & standard full dash from top to bottom.
This really isn’t your usual Tubbed RX3, it goes well beyond that and I am sure that you can appreciate the amount of work and money that has gone into the vehicle.
As it stands, the vehicle currently owes somewhere in the vicinity of $80,000.
This would make an ideal starting point for a very full on car and the best thing about it, so much of all the hard work has been done.
The vehicle was built with the intention of doing the show scene Summernats etc. What you see in the pics is what you get as we have no other parts for the car except the dash as listed.
This vehicle was a one owner 808 sedan which had never been damaged before. The only rust is in the left hand rear door the size of a ten cent piece and from memory and its only surface rust.
The decision to sell the vehicle hasn’t come lightly but I feel that it is time to move on and allow somebody else to finish the vehicle to its full potential.
I had some major plans for this vehicle but unfortunately due to certain changes in my life and circumstances I can no longer proceed with the project.
The vehicle was painted satin black for a car show as advertising for Zaggari Engineering . The panel and paint still needs to be done as that isnt the finished product.
The vehicle requires plenty of work to get to a finished product and quite a substantial amount of money will be needed to finish it to get the result it deserves.
To really appreciate the quality of the car and all the engineering that has gone into it you really do have to see it in person, photos are good but it doesn’t do the car justice at all.
If you are genuinly interested in the vehicle and not a time waster then please feel free to email my brother: mrrx87@yahoo.com.au for further details about the car and more photos can be easily arranged (I have taken plenty)
Please keep all your comments Constuctive and Positive. Cheers.
http://img405.imageshack.us/img405/230/rx30ka9.jpg
http://img208.imageshack.us/img208/7319/rx25vc6.jpg
http://img208.imageshack.us/img208/6518/rx32go5.jpg
http://img405.imageshack.us/img405/2259/rx35mz3.jpg
http://img149.imageshack.us/img149/4840/rx33fn9.jpg
http://img208.imageshack.us/img208/5158/rx14ks8.jpg
http://img405.imageshack.us/img405/4228/rx16no1.jpg
http://img178.imageshack.us/img178/7053/rx18rm0.jpg (http://imageshack.us)
http://img178.imageshack.us/img178/5471/rx31pv2.jpg (http://imageshack.us)
Price and price conditions: $39,950
Extra Info:
The car has been built along the lines of the US style Pro tourer cars that guys like Troy Treppanier & Chip Foose build.
Custom Designed Full Chassis ,All chassis mods and the majority of workmanship was performed by Zaggari Engineering in Adelaide.
Custom Sheet Metal Work including: Tubs, Flat Floor Pan, Trans Tunnel, Flat Firewall, Modified & Stretched Front Tyre Wells, Modified Dog Leg & Door Jams, Stretched Rear Guards.
Suspension: AVO Coil Overs All Round, Custom Double Wishbone Set Up On Front End, Modified Torana Rack & Pinion Steering, Braced Steering Column, Rod Hadfield Spindles.
Differential: Shortened & Fully Braced Ford 9 Inch, Romac Full Floater, 31 Spline Hubs, Custom Fabricated 4 Link.
Front Brakes: Series 6 RX7 Calipers, Vented Commodore Slotted Discs
Rear Brakes: Custom Falcon Combination, Vented Commodore Discs
Driveline set up for a 20B Triple Rotor mated to a Powerglide Transmission. (motor is only a dummy block with no internals and the gearbox the same)
Engine Has: Modified Sump and has been Professionally Mounted.
Transmission Has: Deep Alloy Sump, Al’s Race Glides T6 Heat Treated Alloy Bell Housing.
Front Wheels: 18 x 7 FR Simmons on 215 / 30 / 18 Falken Tyres
Rear Wheels: 18 x 12 FR Simmons on 335 / 30 / 18 Pirelli P – Zero Tyres
New Parts: 12A Nosecone (STEEL) "NOS", Savanna Lower Lip (STEEL)"NOS", Headlight Surrounds "NOS", Savanna Grill "NOS", Chrome Strip(S/H but mint & eyebrows ("NOS"), Savanna Indicator Lenses "NOS".
Also Included: Savanna Hex Tail Lights (immaculate condition) & standard full dash from top to bottom.
This really isn’t your usual Tubbed RX3, it goes well beyond that and I am sure that you can appreciate the amount of work and money that has gone into the vehicle.
As it stands, the vehicle currently owes somewhere in the vicinity of $80,000.
This would make an ideal starting point for a very full on car and the best thing about it, so much of all the hard work has been done.
The vehicle was built with the intention of doing the show scene Summernats etc. What you see in the pics is what you get as we have no other parts for the car except the dash as listed.
This vehicle was a one owner 808 sedan which had never been damaged before. The only rust is in the left hand rear door the size of a ten cent piece and from memory and its only surface rust.
The decision to sell the vehicle hasn’t come lightly but I feel that it is time to move on and allow somebody else to finish the vehicle to its full potential.
I had some major plans for this vehicle but unfortunately due to certain changes in my life and circumstances I can no longer proceed with the project.
The vehicle was painted satin black for a car show as advertising for Zaggari Engineering . The panel and paint still needs to be done as that isnt the finished product.
The vehicle requires plenty of work to get to a finished product and quite a substantial amount of money will be needed to finish it to get the result it deserves.
To really appreciate the quality of the car and all the engineering that has gone into it you really do have to see it in person, photos are good but it doesn’t do the car justice at all.
If you are genuinly interested in the vehicle and not a time waster then please feel free to email my brother: mrrx87@yahoo.com.au for further details about the car and more photos can be easily arranged (I have taken plenty)
Please keep all your comments Constuctive and Positive. Cheers.
http://img405.imageshack.us/img405/230/rx30ka9.jpg
http://img208.imageshack.us/img208/7319/rx25vc6.jpg
http://img208.imageshack.us/img208/6518/rx32go5.jpg
http://img405.imageshack.us/img405/2259/rx35mz3.jpg
http://img149.imageshack.us/img149/4840/rx33fn9.jpg
http://img208.imageshack.us/img208/5158/rx14ks8.jpg
http://img405.imageshack.us/img405/4228/rx16no1.jpg
http://img178.imageshack.us/img178/7053/rx18rm0.jpg (http://imageshack.us)
http://img178.imageshack.us/img178/5471/rx31pv2.jpg (http://imageshack.us)