Hub Adaptors for ED FALCON

[ben351]

Chasing a set of hub adaptors to change my ED falcon stud pattern to post AU stud pattern …

Any ideas guys !?!?!

[DESAM8+PANIK]

Should be same only an offset difference

[Tocchi]

Ben, i got mine from Brad at Beaurepairs a while back - about $80 each

25mm ones - worked a treat for 8.5" AU-BF offset rims

*edit* the ones from above, were not the ones that made my wheel come off. haha that was bought off a forum.

just make sure you get the right pitch thread of the wheelnuts

[ben351]

Should be same only an offset difference

this means

[mys1]

you need bolt on 25mm spaecers to make the rims fit properly.

this adjusts the "offset" of the rim so that it fits the ED properly.

as for thread pitch, Use 1/2 inch wheel nut to bult the psacers to the hubs, then whatever the pitch on the spacers youll need to bolt the wheels on.

see below

http://i71.photobucket.com/albums/i125/Phantom83/DSC00003.jpg

[mys1]

http://cgi.ebay.com.au/Brand-New-10-15-20-25-30-35mm-Spacers-with-Bolts-1pair_W0QQitemZ300176863062QQihZ020QQcategoryZ6782 QQrdZ1QQssPageNameZWD10VQQcmdZViewItem

[ben351]

found set on ford forums

[RICEY]

Sometimes you can get away with different offsets without spacers, i did.

[thommo]

want some BF xr6 18s ?

[ED40]

e-series fords are between 0 and +6 offset, so rims usually right in the guards.. not cool, definately need spacers.