PDA

View Full Version : FS: 1989 R31 Skyline Turbo



Ratus
24-09-2007, 10:31 PM
Series 3 R31 Skyline GX

RB20DET silvertop conversion

Mods:
full 3 inch straight thru exhaust with 3inch screamer dump pipe and 3 inch cannon (dosnt look too ricey either)
front mount intercooler and piping
HR31 gearbox
9puck Xtreme heavy duty clutch
pod filter




Speedy mags 16inch up front, 17s on the rear (previous owners choice of rolling stock) tires all round have about 50-60% tread
whiteline swaybars and nolathane bushes (rears have been fitted about 1 month ago, fronts are still in box)
Mini spool diff


Parts still in box/not on the car:
R34 Neo RB25 turbocharger, had done 47,000km's when removed.
front and rear KYB shocks (bought, never found the time to fit them)
As mentioned above, front whiteline swaybars with associated nolathane bushes
Turbotech adjustable boost controller.


Interior:
Front nissan cefiro adjustable seats
custom parcel shelf
kenwood MP3 player, 6.5 inch splits, 6x9 rears, pioneer amp and a 12inch JBL sub
aftermarket sports steering wheel

Exterior:
HR31 GTS-X "GTS" front grill
front lip, moulded into bumper
Clear front indicators, tinted side indicators
both bumpers resprayed black, both are scratched and could use a respray, but i've never been too phased by it. Part of the rear bumper needs realigning/replacing too.

small dent in drivers side fender, only noticeable within a few feet of the car.
The usual small amount of rust in bottom of the fenders, not noticeable, unless you like laying next to the wheels.


Comes with permits, mods on the permit are as follows:

1. "Fitment of a front suspension strut brace" (the guy at pits insisted i needed it, i gave up trying to argue the point)
2. "Fitment of a turbocharger, front mount intercoooler and associated piping" (dosnt state what turbo whether factory or aftermarket)
3. "Fitment of a conical shaped air filter"
4. "Engine has been changed from an RB30 6cyl to an RB20 6cyl"

Dynoed back in august, pulled 224.4rwHP in Shootout mode with a steady AFR of 13.0, can supply dyno sheet.



Overall it's been a very reliable and nice car to own and drive, done plenty of trips down south, hasn't missed a beat.

Reason for sale: Big dirty M word, mortgage has come into play, so I'm getting something "more sensible"

Location: Joondalup

$4500 ono, any negative feedback, take it to PM or keep it to yaself.

Anybody interested please leave a post or PM and I will get in contact,

Cheers, Mitch


Pics will be added in the next day or so

Kaliber
24-09-2007, 10:47 PM
what model of r31 is it? silo, gx, ti, etc

has it been boosted?

pics would be good

Ratus
24-09-2007, 10:54 PM
will try and reduce image sizes and post some up mate, purchased a turbotech boost controller, had it on 13psi for a day or so, didnt feel i needed it so i unhooked the controller and relegated it to the glovebox :)

http://i21.tinypic.com/3d6vs

http://i20.tinypic.com/xkpwdk.jpg

Berny
25-09-2007, 09:35 AM
Interested in selling the R34 turbo mate?

RB20ZED
25-09-2007, 11:25 AM
mate im interested whats ur mob pm to me :P

Ratus
25-09-2007, 04:44 PM
Berny, not at this stage dude, the turbo is perfect upgrade for whoever buys the car so i'd like to sell as a package so to speak,

zed man u has PM :)

Ratus
26-09-2007, 06:36 PM
*sold*