PDA

View Full Version : Haltech Tuners



adrenalin
03-09-2007, 01:26 PM
Just wondering when i get car up and running does anyone know places in perth who do tuning for the haltech E6k.

I heard there is a place out near bibra lake however i dont have the details.

Cheers !
Kieren

1JZNOSHIT
03-09-2007, 01:36 PM
yeah, called In Tune Performance.

Lump
03-09-2007, 01:42 PM
top racing are haltech agents/tuners

adrenalin
03-09-2007, 01:55 PM
Do you guys have contact numbers or websites on these places.

Also do you know roughly the cost of there tuning rates ?

Lump
03-09-2007, 02:15 PM
94702222
sorry only know about awd tuning rates

adrenalin
03-09-2007, 02:27 PM
Thanks for that.

matty12
03-09-2007, 07:18 PM
Tenagah are new dealers for Haltech,not sure if they are tuning yet.VPW(?)in ozzy park,Dave at T&R Green also do tune them and has done work previously on one of my cars.

mogila69
13-05-2008, 07:01 PM
Tenagah are new dealers for Haltech,not sure if they are tuning yet.VPW(?)in ozzy park,Dave at T&R Green also do tune them and has done work previously on one of my cars.

yeh tenagah hav there own dyno, and there own tuner, so yeh they can tune the car wid the haltech

Lonewolf
13-05-2008, 07:33 PM
allstar

Mirz
26-05-2008, 10:31 PM
aaron@ intune performance has been nothing but good 2 my mates car tuning it a few times would def reccomend him!

MISS 13B
27-05-2008, 08:38 AM
2nd that!
Aaron from In Tune worked wonders. He tuned my car brilliantly even when there was a glitch in the wiring that went undetected at first but he managed to tune "around" it basically.

KPCresta
28-05-2008, 09:27 AM
Aaron at In Tune tunes my car all the time...

405rwhp @ 20psi yay :)

TJ
28-05-2008, 02:00 PM
Sean @ Allstar, Yoda can do them but wont enjoy it, and Ant @ Tenegah

Mirz
30-05-2008, 01:19 AM
just got more news about Aaron, 483 HP On 23psi on unopened 1jz with a big GTK strapped on.

KPCresta
30-05-2008, 09:34 AM
Yep I saw the dyno sheet last night....

Jealous!

iluv2moan
30-05-2008, 07:22 PM
just got more news about Aaron, 483 HP On 23psi on unopened 1jz with a big GTK strapped on.

its amazing what intake temp sensor on turbo manifold will do :)

RGVFAST
30-05-2008, 07:27 PM
what IT he gettn? mine was t78 on unopened 409 rwhp at 25 degrees i think
22psi pump fuel

DCIEVE
30-05-2008, 07:44 PM
not unopened thats for sure

KPCresta
31-05-2008, 06:22 AM
The only internal mod is HKS 272 intake & exhaust cams... stock bottom end

It uses the new Turbonetics GTK Series turbo which produced about 30hp more then the Garrett T04Z he used to have...

iluv2moan
31-05-2008, 09:17 AM
The only internal mod is HKS 272 intake & exhaust cams... stock bottom end

It uses the new Turbonetics GTK Series turbo which produced about 30hp more then the Garrett T04Z he used to have...

come on man - if u gonna tell a story, least get your facts straight

he used to have a garrett gt35 with 0.63 rear housing
now has a gtk 650 with 0.7 (or thereabouts)

DCIEVE
31-05-2008, 11:12 AM
come on man dont ruin the dream, i heard it was running a t88, gtk>all

iluv2moan
31-05-2008, 11:22 AM
gtk>all

no no, HTA>gtk>everything else

kpcresta: how come u didnt go a gtk over garrett. btw naths gt35 was choking hard on his 2.5 ltr with .63 rear.. it will be intersesting to see how the 0.7 goes on a 3.0 ltr

EDIT: ignore that - just saw your forsale post on sf.com

TJ
31-05-2008, 11:59 AM
Haha this story needed more unicorns.

unopened, cams, not same.

gt35, t04z, not same

69 degree inlet temps, 20 degree day, not same!

iluv2moan
31-05-2008, 12:44 PM
69 degree inlet temps, 20 degree day, not same!

i was only kidding with inlet temps, i havent seen the dyno graph yet nor was i there when my mates car got tuned.

either way the power it made is impressive (esp for a 1jz). It would have made more if not for a slipping single plate clutch....

Im not sure if he was running water meth or not for that power though

eitherway, deff a pretty cool car which might be heading back over east depending on how pussywhipped the owner gets

Mirz
31-05-2008, 01:14 PM
his old setup was
GT35R- .63 rear housing
now holds a gtk 650 with 0.7..
and with cams, everything else bottom end is stock..

And no, Nathan is gonna stay here gonna convince him!

KPCresta
31-05-2008, 04:13 PM
Haha this story needed more unicorns.

unopened, cams, not same.

gt35, t04z, not same

69 degree inlet temps, 20 degree day, not same!

Haha TJ don't live up to your little avatar there now buddy by implying b.s power figures, well we all know dynos are just a tuning tool anyhow... :P (I didn't say it was stock Mirz did)

I am always present when my car is tuned and the probe is in the farkin air filter hmmkay

KPCresta
31-05-2008, 04:15 PM
http://i26.tinypic.com/2j4q3vo.jpg

KPCresta
31-05-2008, 04:16 PM
Ambient temp = 18

Inlet temp = 21

KPCresta
31-05-2008, 04:19 PM
no no, HTA>gtk>everything else

kpcresta: how come u didnt go a gtk over garrett. btw naths gt35 was choking hard on his 2.5 ltr with .63 rear.. it will be intersesting to see how the 0.7 goes on a 3.0 ltr

EDIT: ignore that - just saw your forsale post on sf.com

When funds allow I will purchase a GTK 850 and go for gold see what I can get on pump fuel...

1jzmonster
02-06-2008, 06:09 PM
Intake temps were 29 degrees, stuck on air filter, and rears were smoking on the power runs at the 485 stage,

DCIEVE
02-06-2008, 06:28 PM
so which is it, clutch slip or tyres smoking :)

1jzmonster
02-06-2008, 10:40 PM
middle clutch, rear's tires!

iluv2moan
02-06-2008, 11:22 PM
i heard from kpcresta that it smoked all 4 tyres on the dyno

KPCresta
03-06-2008, 06:35 AM
i heard from kpcresta that it smoked all 4 tyres on the dyno

Hahah muppet :P

Do I know you.....?

Sleekman
14-06-2008, 08:07 PM
Wasnt there another thread about which tuner tunes which ecu?