View Full Version : FS: NA 2jz to turbo kit
Drift_R32
26-06-2007, 04:54 PM
For Sale: N.A 2jzge to Turbo Kit
Microtech LT12S + Hand Controller and Laptop connector-Running Base Map for N.A 2jzge to Turbo
Tdo7 Turbo-Seen less then 500km in perfect condition
3 inch Dump pipe-new
Top Mount Stainless Steel Manifold-new
38mm Tial External Gate-less then 500km old
4.5inch Stainless Steel Inlet Pipe to Turbo-new
Pod Filter
Custom Oil Lines for Tdo7 to 2jzge-less then 500km old
Sard 550cc-Cleaned and used for less 500km
Walboro Pump
Turbo Blanket
Information:
The parts are from a Cressida that had a 2jzge installed and then slowly turboed..unkown to the builder the rings in the motor were gone and only when it came to getting the car dyno tuned the owner was informed so the only trip the car took was from the dyno shop back to his house..there it sat till it was sold to me..i had large plans for the car but financial set backs have forced me to sell the parts off the motor to get back some of the purhase price on the car.With this setup and a good dyno tune, very decent figures are possible…
Dont really want to seperate the kit..unless i have no interest then ill be happy too
Price: $3500 ono ?
Contact: Michael on 433 643 939
What about for the entire car?
marky85
27-06-2007, 11:44 AM
poor thommo hehe
Muppet_Guy
27-06-2007, 12:11 PM
Hmmmm, god damn it's tempting...
Is it still installed in the car and running?
What else would be needed to make it work do you reckon? Obviously FMIC, piping and so on? Anything else?
thommo
27-06-2007, 01:30 PM
it will all bolt onto your engine. you will need intercooler fitted and the microtech wired up, also fuel pump
Hmmmm, god damn it's tempting...
Is it still installed in the car and running?
What else would be needed to make it work do you reckon? Obviously FMIC, piping and so on? Anything else?
Do it.
Muppet_Guy
27-06-2007, 03:35 PM
I just realised I'd still need to do some internal work on the engine, I think the compression ratio is slightly different between NA and TT. And I don't know whether the stock 5 speed auto tranny will handle the extra power either...
But fark, boost is what that car needs for sure :\
Drift_R32
27-06-2007, 03:45 PM
yeh compression is different..i talked to Ovaboost about this, still can run about 14psi on NA motor which is still like 350 to 380 at wheels..turbo pistons fit straight in and then its really watever u want to run..
thommo
27-06-2007, 03:46 PM
you can run it at 10psi safely aslong as u get it tuned!
or you can buy a headgasket from boostlogic or paradise racing and they are thicker than normal, and drops the compression down. they have run upto 30psi on their engines once the gasket was put on.
auto needs tranny cooler and shift kit
Muppet_Guy
27-06-2007, 04:04 PM
Hmmmm... I'll give it some thought then cheers!
Now I can also see a problem in convincing my fiance to divert some of our wedding money into this hahaha!
Miami
27-06-2007, 06:23 PM
I will have a Walbro 255 fuel pump for sale shortly Dan - will suit your needs :)
AntonRX
27-06-2007, 06:46 PM
hey mate do you still want me to take that stuff off the car saturday? maybe it would be better to sell with the car? unless you got other plans for it
Drift_R32
28-06-2007, 05:08 PM
nah well unles someone wants to buy the complete thing..i dont have the room for it
so just a word anyone interested in the complete car, please pm before Sat otherwise car will be taken apart..
Drift_R32
29-06-2007, 06:43 PM
considering seperating kit..please pm for parts and prices..
the car itself will still have the 2jz in it minus turbo gear, r32 rims with good tyres,king springs all around, rebiult LSD, new pads all around, brakes just bled, cressy box with MV stage 1.5 shift kit, 3 inch exhuast, battery in boot, au twin thermo fans, tranny cooler, interior and exterior is in great condition...shoot me an offer for the car..
Blueraven
29-06-2007, 11:04 PM
Hmmmm... I'll give it some thought then cheers!
Now I can also see a problem in convincing my fiance to divert some of our wedding money into this hahaha!
DOooooo it. :werd: wedding can wait!
Drift_R32
01-07-2007, 04:35 PM
all the running gear is and been sold seperate..
pm me for price and pics..
booyakasha
02-07-2007, 10:27 AM
have rung you michael, let me know when I can view car/parts.
Thanks
Troy
mob: 0415959134
wadragracing
02-07-2007, 11:32 AM
Dan, you need to turbo that IS so bad. That would be one lethal street car man.
You're an accountant, so account your ass some funds, doooooo it.
Drift_R32
02-07-2007, 06:28 PM
alright pics are up...
turbo
gate
turbo lines
manifold
dump pipe
inlet pipe and filter
exhuast
3 guages-never used
various intercooler piping
various gaskets for 2jzgze
computer and hand controler
injectors
transmission cooler
alternator
things i havnt taken fotos of, are...
r32 rims and tyres
au twin thermos
battery setup for boot
the car itself...
pics are at...(loading)
Muppet_Guy
03-07-2007, 08:48 AM
DOooooo it. :werd: wedding can wait!
Haha, try to say that in front of Karolina, I dare ya :shake: (she can throw some good punches when provoked) :lol:
Dan, you need to turbo that IS so bad. That would be one lethal street car man.
You're an accountant, so account your ass some funds, doooooo it.
Hmmm, maybe, just maybe, when I finally sell the soarer, I will have some spare cash for it, and I still need to be told how much both sets of parents will chip in towards the wedding, until then I can't do anything, no matter how much I'd want to :(
Pzest
03-07-2007, 01:17 PM
DOOOOOOOOO EEEEEEEEEEEET DAN!
otherwise just drop a whole 2jzgte in :p
mmmm boosted IS hawt
DTM-031
03-07-2007, 01:35 PM
all pics here
http://dtm031.net/random/michael/
booyakasha
03-07-2007, 06:28 PM
exhaust is mine
Drift_R32
06-07-2007, 06:25 PM
exhuast, car, tranny cooler is gone
rest is still availible..shoot me an offer its just sitting around
Drift_R32
12-07-2007, 07:01 PM
bump
Drift_R32
30-07-2007, 05:47 PM
kit still for sale..
shoot me an offer..
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.