View Full Version : coilover tech
WRCjosh
10-08-2004, 11:23 AM
Are the springs in coilovers interchangable? The springs i currently have are far too stiff (basically 0 rebound) and id be keen to change them for ones with a little more give. Anyone know where i should go to get some? Is it even POSSIBLE to swap springs? Any advice is appreciated
josh
[SPESHAL]
10-08-2004, 01:20 PM
Yes its possible. Speak to John Fowler at Wheels World, if you want the best advise.
WRCjosh
10-08-2004, 02:18 PM
cheers paul
No probs on swapping springs , many do to save custom spring costs . You need to find one with matching collar and top hat ID/OD , and ballpark relaxed spring length . Too much , and you get over amounts of pre-load , too little and the spring can be damaged when the car gets light , not to mention the first 20-30-40mm depending , will be soft and soppy , not to meantion it will probably squirm when you get the car light , then come back to pre-load again .
suburban
21-08-2004, 02:36 PM
while i dont have an answer i went to wheels world this morning and spoke to john - TOP BLOKE
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.